This case has been designed following Apple's strict guidelines for iPhone cases - this assures a precise and tight fit and unconstrained functionality.

Protection

The Strong & Flexible material from Shapeways is durable enough to keep your iPhone completely safe when dropped. It can be combined with commercially available screen protectors. I would recommend combining it with the InvisibleShield for a nice combo protection.
Also, it is dishwasher-safe. If your case gets dirty over time, put it in your dishwasher and it will look brand new!

If you find that you accidentally touch the part of the iPhone antenna that reduces reception, you won't have that problem with this case. If you usually talk with your iPhone in your left hand, and if you are often in areas with marginal signal coverage, this case will make it less likely for you to lose a signal and drop a call.

Playing games or using the GPS raises your iPhone's body heat much. That's because you use your CPU at max. According to Apple's knowledge-base, if the interior temperature of the device exceeds normal operating temperatures, you may experience the following as it attempts to regulate its temperature: Device stops charging, Display dims, Weak cellular signal, Camera flash is disabled, Temperature warning screen appears with the message "iPhone needs to cool down before you can use it". To help your iPhone keep normal operating temperatures, you should use a bumper or a case such as this one, since it does not cover the back of the iPhone and does not trap the heat inside.

Design

This case doesn't distract much from the feel of the iPhone. It has the advantage of being the "un-case" because it is so minimal and does not cover the front or the back of the iPhone. Neither the sides.

It doesn't distract from the design of the iPhone either. The problem with traditional cases is that they completely cover up the iPhone. Using a traditional case you end up feeling like you are holding rubber in your hand when you hold your iPhone. The iPhone's design is really amazing and it would be a pity to hide. The case allows both the design to show and a quite smooth feel instead.

Easy to use

This case allows to plug in the 30-pin dock connector without removing the case, while all controls and connections remain accessible.

Materials

Recommended material for purchase: Strong & Flexible (any color).
Make sure that you check under 'Select Material' for currently available color options.

Instructions

To put the iPhone in the case, start at one of the top corners. To take it out, start from the bottom corners where there are no buttons.

Small Shakuhachi Flute. This flute is an "F" Key. I'm very impressed with the Shapeways Team for doing such great work! :) I'm offering this flute in a variety of materials, including Antique Bronze Glossy as shown in the images for $239.95 Please contact for a customized/personalized Shakuhachi flute, or a larger version of this one. ancienteyes@shaw.ca There's a video of my Father playing some basic notes on it. :)

This case with a unique design representing the front of a speaker will fit perfectly your iPhone 4 or 4S. This phone cover has been tested for everyday use, the phone is set up or removed quickly and all buttons and ports are easily accessible, no need to remove the case to plug the connector. The appearance is a bit rough when it is brand new, but after a few days of use, it becomes smooth.

This pendant is known as a ‘Dharmachakra’ or "Wheel of Life", represents • Right beliefs • Right aspirations • Right speech • Right conduct • Right livelihood • Right effort • Right mindfulness • Right meditational attainment. This pendant is approximately 1.5 inches wide.

Have you ever seen an iphone-looking keychain? And what if this keychain was a faithful copy of your real-life device? Send two photos (front and back) of your phone and get one just for a couple of bucks :)

Have you ever wanted to watch a movie on your iPhone, but didn't like holding it? Have you ever wanted a keychain gadget that would hold it for you? Then check out the iPhone Movie Stand!

From the Jake Drews Strange Gadgetry Collection of Sometimes Fantastically Amazing Inventions comes a fully customizable piece that is sure to find a home on your keychain. Its convenient size makes it possible to attach to your current set of keys, while also maintaining physical function and beautiful aesthetics. You can even add your initials (or someone else's initials) to the stand to personalize this "must have" gadget. The iPhone stand also works great with the iPod Touch as well! Although this device has not been tested with the iPad, it should work, but 2 stands may be required to stability.

This is a snap case designed for iPhone 4.

Stripes are statement! Like in fashion stripes have always give strong message from it's owner. Scotch have it as national pattern, punks have also adopted them and it's basically always in fashion. Be proud and show it for the others!

You can get it in pure snow white or colored nylon (Black, Red, Gray, Indigo or shiny alumide). Nylon's nice rough texture gives a good grip for the phone. The material is also strong and flexible, to give the best support for you device.

Just order and enjoy your phone with a unique touch. iPhone 4 and wire are not included.

Questions and requests please contact straight to my personal e-mail: pekka.salokannel@gmail.com

The Bike Mount for iPhone lets you attach your iPhone 3G / 3GS to your bike’s handlebars so you can track your GPS position, your speed, or distance travelled, while you ride.

Easy to mount and remove by a bayonet nut connector.

The bike mount is designed for bikes with 1" (24-26.5mm) handlebars.

Portrait or landscape mode, it’s your choice (see the pictures).

Tested and used during the last months by several people.

Please take a look also on my other iPhone cover designs and the iPhone 4 bike mount

video available ... see youtube link below.

http://itunes.apple.com/de/book/sculpture-3d/id552730881?mt=11

The ISkull Vamp is an IPhone 'gramophone.' The eye sockets act as amplifiers to increase the sound from the phone's speaker. We modeled this skull hollow to save you money. The Regular non-Vamp iSkull is here: http://shpws.me/3Lvz

for iphone 4/4s. The hollowed case in combination with the contract color of the iphone itself gives a vivid animal figure. The case is stylish and in the same time heat eliminated.

Simplicity, is the aim of this case, the back has been ripped off revealing that the iPhone is being powered by nothing more than simple clockwork, a great match for a device which is so simple to use.

Pick Your Color and Personalize with 2 lines of customizable text, up to 14 characters long on each line.

Simply Simple.

Note that the cogs don't move; Please check out my other version with Moving Cogs!
And my newest TriStand Case for iPhone 5 and 4/4s version which has an integrated 3 in 1 stand.

Printed and Tested

Fitting and Removing Instructions Here

Please check out the rest of my Shop including my other iPhone Case and the 3 Axis Ball made from a single thread.

Detailed Growling Tiger Ring made especially for Sterling Silver, also available in many other materials. Available in 7 sizes. US Ring Sizes, Inside diameter: 7-(17.3mm) 8-(18.1mm) 9-(19.0mm) 10-(19.8mm) 11-(20.6mm) 12-(21.4mm) 13-(22.2mm)

please email us your invoice and your shipping information at nulogia@gmail.com so that we can ship your lens to you for free !

Detailed Scorpion/Scorpio Pendant Design created for Dropping Form Designs. Looks great in Gold Plated Glossy. :) Polished, the Gold-plating almost has a silver sheen in the sunlight. Very nice, I like the texture as it is though. I'm getting some Bronze versions as well. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca

iPhone 3G & 3Gs Case.

holds your iphone in an easy to use position
fits all versions on the iphone and ipod touch's

Want to change something or want a completely custom gift?
get in touch

email crankeddesign@gmail.com
or contact us via crankeddesign.info

Product Name "303 Acid ring". Designed by Japan.

Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

.7 mm Skull Cage for Silver Material.

This bottle opener with the shape of a bull head will make a good impression on your guests and friends.

Since it should be strong and resistant, I suggest choosing the steel material. This model is slightly smaller than a standard bottle opener. The larger, stronger version is available here.

Original design.

The price includes everything (shipping, taxes...), but not local taxes that may apply in your country upon reception.

Smallest version with larger thickness

Hearts case design for the iPhone 3G or 3Gs.

A very comfortable and stable 30º dock for working with your IPAD in typewriter mode.

Add some style and protect your iPhone 4G with this X type case designed by iFuzion.

iPhone 3G / 3Gs Case. Snug fit, wrap around edges for protection.