by
bitstoatoms
The 3D Printed Skull Brooch by Bits to Atoms continues the Popular Skull range to be held in place with two rare earth magnets so you do not need to place a pin through the lapel of your jacket to make it stay.
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
by
SGDesigns
Vampire Skull Ring
This isnt your typical ring. Made thick and solid all the way around. This ring has a good amount of silver with a total weight of 1.5 oz. Personaly, I like solid, heavy rings. This is definitely not a hollow ring. This ring is massive with crazy detail. Highly detailed all the way around the entire ring. I'm very picky with my rings and detail is top priority. That being said, everything has to be perfect, especialy since I made this ring for myself. Ring comes in standard silver or silver glossy. The antique look or patina can be added as an aftermarket.
Material: 925 Sterling Silver
Size: 10
Weight: 42 grams
More sizes available below
Size 10
Size 11
Size 12
by
SGDesigns
Cheshire Cat ring inspired by Alice In Wonderland.
This ring is made thick and chambered for a better fit.
Engraved on the inside of the ring it says "We're all mad here.."
Ring size: 8.5
I will be adding more sizes soon. Feel free to email me for a specific size.
More sizes available below
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 11
Size 12
Size 13
by
vertigopolka
My 3D printed small mesh purse (3.8 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a recloseable clasp. See my larger Medium Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap.
View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.
Due to size limitations, colors are no longer an option for this product. :(
Want to get a set
+ 
Want to get a set
+ 
View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.
Due to size limitations, colors are no longer an option for this product. :(
Want to get a set
(small purse and 36-inch strap)?
+ Want to get a set
(small purse and 45-inch strap)??
+ 
by
SGDesigns
Silver Demon Skull Bead
Hole size: 6mm
Estimated weight: 27 grams
The bead in the image above is in standard silver. I gave it a light polish and aftermarket patina.
If you want it patinated and polished, please contact me directly.
by
MichielCornelissen
PadFoot is the popular viewing stand for iPad 2, iPad 3 and iPad 4; for more information, go here.
Buy a wholesale pack of 4 PadFoots at up to 30% lower prices from this page. Product is shipped in basic Shapeways packaging.
Buy a wholesale pack of 4 PadFoots at up to 30% lower prices from this page. Product is shipped in basic Shapeways packaging.
by
cwestbrook
Please read the entire listing. Thank you!
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
Maundy
This original TriStand has been replaced by newer versions:
Please check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal- Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
The TriStand iPhone case is a stylish and rugged designer snap on case for your iPhone 4 or 4s which protects your iPhone with 3 flip out hinged integrated stands while keeping the thickness of the case at a modest 2.25mm (1.5mm at the sides); these stands can be used to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos!
The TriStand is 3D printed in a strong and rugged Polyamide material in the colours in the drop down box labelled 'Select Material' in the top right, these materials also have a grippy texture to them. Due to the amazing capabilities of 3d printing, the TriStand is printed fully assembled, so no assembly is required.
Watch the video in the above slideshow to see the case in action and a demonstration of how to use the case.
The intelligent design uses 'ball in socket' like catches to prevent the moving parts from opening by themselves in your pocket.
Guaranteed to fit all types of iPhone 4 and 4s.
Before installation, unclick all the moving parts and move all the moving parts back and forth gently, this may be quite hard at first due to excess printing material from the printing process however this will get easier quickly, however some of these hinges are designed to rotate only 90 degrees in each direction, do not force the moving parts more than this as this can result in damaging the hinges.
To install the case, push the top of the iPhone all the way into the top of the case and then clip the bottom two corners in and push them together to ensure a good fit.
Check out the TriStand Full Case which covers the whole back of the iPhone
Designed in the UK. This design is protected by the UK 'Design Right'.
© Alex Maund 2012
Please check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal- Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
The TriStand iPhone case is a stylish and rugged designer snap on case for your iPhone 4 or 4s which protects your iPhone with 3 flip out hinged integrated stands while keeping the thickness of the case at a modest 2.25mm (1.5mm at the sides); these stands can be used to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos!
The TriStand is 3D printed in a strong and rugged Polyamide material in the colours in the drop down box labelled 'Select Material' in the top right, these materials also have a grippy texture to them. Due to the amazing capabilities of 3d printing, the TriStand is printed fully assembled, so no assembly is required.
Watch the video in the above slideshow to see the case in action and a demonstration of how to use the case.
The intelligent design uses 'ball in socket' like catches to prevent the moving parts from opening by themselves in your pocket.
Guaranteed to fit all types of iPhone 4 and 4s.
Before installation, unclick all the moving parts and move all the moving parts back and forth gently, this may be quite hard at first due to excess printing material from the printing process however this will get easier quickly, however some of these hinges are designed to rotate only 90 degrees in each direction, do not force the moving parts more than this as this can result in damaging the hinges.
To install the case, push the top of the iPhone all the way into the top of the case and then clip the bottom two corners in and push them together to ensure a good fit.
Check out the TriStand Full Case which covers the whole back of the iPhone
Designed in the UK. This design is protected by the UK 'Design Right'.
© Alex Maund 2012
by
jeff
The apple came from a tree and thus a reunion is made on the back of your iPad 2.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
by
{DF}
This case has been designed following Apple's strict guidelines for iPhone cases - this assures a precise and tight fit and unconstrained functionality.
Protection
The Strong & Flexible material from Shapeways is durable enough to keep your iPhone completely safe when dropped. It can be combined with commercially available screen protectors. I would recommend combining it with the InvisibleShield for a nice combo protection.
Also, it is dishwasher-safe. If your case gets dirty over time, put it in your dishwasher and it will look brand new!
If you find that you accidentally touch the part of the iPhone antenna that reduces reception, you won't have that problem with this case. If you usually talk with your iPhone in your left hand, and if you are often in areas with marginal signal coverage, this case will make it less likely for you to lose a signal and drop a call.
Playing games or using the GPS raises your iPhone's body heat much. That's because you use your CPU at max. According to Apple's knowledge-base, if the interior temperature of the device exceeds normal operating temperatures, you may experience the following as it attempts to regulate its temperature: Device stops charging, Display dims, Weak cellular signal, Camera flash is disabled, Temperature warning screen appears with the message "iPhone needs to cool down before you can use it". To help your iPhone keep normal operating temperatures, you should use a bumper or a case such as this one, since it does not cover the back of the iPhone and does not trap the heat inside.
Design
This case doesn't distract much from the feel of the iPhone. It has the advantage of being the "un-case" because it is so minimal and does not cover the front or the back of the iPhone. Neither the sides.
It doesn't distract from the design of the iPhone either. The problem with traditional cases is that they completely cover up the iPhone. Using a traditional case you end up feeling like you are holding rubber in your hand when you hold your iPhone. The iPhone's design is really amazing and it would be a pity to hide. The case allows both the design to show and a quite smooth feel instead.
Easy to use
This case allows to plug in the 30-pin dock connector without removing the case, while all controls and connections remain accessible.
Materials
Recommended material for purchase: Strong & Flexible (any color).
Make sure that you check under 'Select Material' for currently available color options.
Instructions
To put the iPhone in the case, start at one of the top corners. To take it out, start from the bottom corners where there are no buttons.
Protection
The Strong & Flexible material from Shapeways is durable enough to keep your iPhone completely safe when dropped. It can be combined with commercially available screen protectors. I would recommend combining it with the InvisibleShield for a nice combo protection.
Also, it is dishwasher-safe. If your case gets dirty over time, put it in your dishwasher and it will look brand new!
If you find that you accidentally touch the part of the iPhone antenna that reduces reception, you won't have that problem with this case. If you usually talk with your iPhone in your left hand, and if you are often in areas with marginal signal coverage, this case will make it less likely for you to lose a signal and drop a call.
Playing games or using the GPS raises your iPhone's body heat much. That's because you use your CPU at max. According to Apple's knowledge-base, if the interior temperature of the device exceeds normal operating temperatures, you may experience the following as it attempts to regulate its temperature: Device stops charging, Display dims, Weak cellular signal, Camera flash is disabled, Temperature warning screen appears with the message "iPhone needs to cool down before you can use it". To help your iPhone keep normal operating temperatures, you should use a bumper or a case such as this one, since it does not cover the back of the iPhone and does not trap the heat inside.
Design
This case doesn't distract much from the feel of the iPhone. It has the advantage of being the "un-case" because it is so minimal and does not cover the front or the back of the iPhone. Neither the sides.
It doesn't distract from the design of the iPhone either. The problem with traditional cases is that they completely cover up the iPhone. Using a traditional case you end up feeling like you are holding rubber in your hand when you hold your iPhone. The iPhone's design is really amazing and it would be a pity to hide. The case allows both the design to show and a quite smooth feel instead.
Easy to use
This case allows to plug in the 30-pin dock connector without removing the case, while all controls and connections remain accessible.
Materials
Recommended material for purchase: Strong & Flexible (any color).
Make sure that you check under 'Select Material' for currently available color options.
Instructions
To put the iPhone in the case, start at one of the top corners. To take it out, start from the bottom corners where there are no buttons.
by
kspaho
After playing around with the (Cage Edit Tool in Rhino), I was able to morph the straignt lines to create some ripples. What started as a simple opening, resulted in the 3D optical illusion. This feature is the only modified aspect of this phone case, while the rest of the architecture remains the same as the one of my earlier cases. Such designs offers a perfect fit for your phone, which I have tested for several months, as you can see on the following demo af an earlier design:
http://www.youtube.com/watch?v=7mrvn2xjp5k
