by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
by
MichielCornelissen
The product at this page is the PadFoot model that fits perfectly to iPad 2 as well as the 3d and 4th generation iPad. For PadFoot for iPad 1, go here.
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
by
JoshuaHarker
Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.
by
Bathsheba
A theorem walks into a bar...
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.
Yes, it really works!
Klein not-a-bottle-opener is here.
by
MichielCornelissen
The Wrap is an accessory that attaches to the USB end of your iPhone charger, transforming it into a handy little cable winder for the charging cord.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
by
cwestbrook
Please read the entire listing!
Reminiscent of Victorian filigree, this unique Designer iPhone 4 case is a durable and stylish alternative to mass produced cases on the market today. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle style case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Reminiscent of Victorian filigree, this unique Designer iPhone 4 case is a durable and stylish alternative to mass produced cases on the market today. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle style case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
harryapeman
This is a new version of the Hand- Heart sculpture. It includes loops that make for easy attachment of a necklace chain!
*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains
*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains
by
GothamSmith
Even if your neighbors complain, you can keep it turned up on your sleeves.
by
bitstoatoms
Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12
The Skull Ring by Bits to Atoms is 3D printed in stainless steel with a tessellated and slightly pitted texture. A masculine piece that works just as well with denim jeans and a t-shirt as it does with a 3 piece suit (or formal dress).Please contact for bespoke sizing.
by
SaGaDesign
Our entry into the Siri design competition, an accessory which slides onto the iPhone and serves as the 'face' of Siri. The androgynous face has a wry, elusive smile suggesting the machine knows something that the user does not.
Behind Siri's all-knowing gaze, the glow of the iphone screen is visible through the sculpture, and the main buttons are still accessible even when the screen is obscured.
The design, when placed over the iphone, forces the user to interact with Siri instead of tapping on the screen to engage commands. For more complicated tasks requiring the screen however, the phone can easily be slipped out of the top of the case.
by
virtox
Phamora Ceramics!
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
by
alienology
Clothoid.A lamp is created by a mathematical curve formula and then that spline is lofted in 3d CAD software. Resulting form is parametric and adjustable in almost infinite number of combinations.
You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece.
This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.
NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com
You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece.
This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.
NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com
by
JoshuaHarker
My iPhone 5 case. The jaw serves as a clip for your pocket, pack strap, purse, belt, sock, underpants, or karate head band, etc. You can also stuff cash, credit cards, business cards, etc under the skull. The shapes reference the 6 primitives used in digital modeling. RIP Steve Jobs
by
tomorrowlab
Solo e Sola is an espresso cup that holds a single cigarette.
The Solo e Sola cup was inspired out of need, and could be used to build an entire business model... imagine a food truck offering single espresso shots with single cigarettes. Currently illegal, probably unhealthy, yet understandably desirable, Solo e Sola is a serving piece for a food truck, a cafe or a restaurant, or individuals.
A product of Tomorrow Lab’s CoBuilt process [ http://tomorrow-lab.com/cobuilt ], this cup was developed for a low cost using rapid fabrication processes including an inhouse MakerBot and Shapeways.com.
by
MikeNaylor
A surprising arrangement of figures to create a mathematical form.
Please note that you must order TWO SETS to create the cube – each set includes two figures and four are necessary to create this sculpture. The figures are identical and snap together tightly hands to ankles to make this striking sculpture. Mix and match colors for your own effects. Or order more than two sets to experiment with other configurations.
This model is being exhibited at the Center for Arts Gallery at Towson University, June 30-July 28, 2012.
Please note that you must order TWO SETS to create the cube – each set includes two figures and four are necessary to create this sculpture. The figures are identical and snap together tightly hands to ankles to make this striking sculpture. Mix and match colors for your own effects. Or order more than two sets to experiment with other configurations.
This model is being exhibited at the Center for Arts Gallery at Towson University, June 30-July 28, 2012.
by
lilys.
On Proper Usage and Inhibited Ingestion:
Why is it that we find the cup so unappetizing? Could it have originated from survival tactics where we relate our proximity to another's teeth as a threat of life, a reminder of predator and prey, poison and contamination?
Is this object then successful in its design to prevent gluttonous behavior should food and drink only be offered in the cup?
more information at http://lilysu.com
by
noesis
The CardCase is now customizable! See Below
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
by
tedk727
iphone4 bumper snap fits. Protect your iphone with distinctive style. Thin profile minimizes extra volume on your iphone.
*Updated on 4/20/2011. Design has been modified for easy fit & release. Lock key is added.
*Updated on 4/20/2011. Design has been modified for easy fit & release. Lock key is added.
by
printedCat
This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and
printed in nylon material by Shapeways.com in Holland or New York.
Enjoy watching!
All images are photos of real objects. "Proof Printed".
printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook
Enjoy watching!
All images are photos of real objects. "Proof Printed".
printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook
by
Dimmulain
IMPORTANT INFORMATION!!!
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
by
wpagnes82828
for iphone 4/4s.
The hollowed case in combination with the contract color of the iphone itself gives a vivid animal figure.
The case is stylish and in the same time heat eliminated.
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. Small silver version of the original design easily strung as a necklace.
by
nulogia
please email us at nulogia@gmail.com with your shipping information so that we can ship your lens to you for free !
by
andrew simpson
This phone allows you to use your phone while you are talking. It keeps the phone away from your head which is a good idea as the jury is still out on whether or not they cause brain tumors.
Just insert your Iphone earbuds and hands-free mic. The sound is crisp and clear.
The style is taken from an old Bakelite phone and is a joy to use.
Some tips from Vert Design...
We've found that the White Strong & Flexible material works well but gets dirty after a bit of use so printing in the Black or Red might be a better idea. Alternatively, why not paint in your own custom colour.
Be careful when screwing on the end caps. We've made a small cutout designed for the cable but if it falls out before you screw on the endcap, the cable can get pinched.
Check out the improved bass response in the standard earbuds. Interestingly, the earpiece acts as a speaker chamber and the lower frequencies are pretty impressive!
Just insert your Iphone earbuds and hands-free mic. The sound is crisp and clear.
The style is taken from an old Bakelite phone and is a joy to use.
Some tips from Vert Design...
We've found that the White Strong & Flexible material works well but gets dirty after a bit of use so printing in the Black or Red might be a better idea. Alternatively, why not paint in your own custom colour.
Be careful when screwing on the end caps. We've made a small cutout designed for the cable but if it falls out before you screw on the endcap, the cable can get pinched.
Check out the improved bass response in the standard earbuds. Interestingly, the earpiece acts as a speaker chamber and the lower frequencies are pretty impressive!
by
bitstoatoms
The 3D Printed Skull Brooch by Bits to Atoms continues the Popular Skull range to be held in place with two rare earth magnets so you do not need to place a pin through the lapel of your jacket to make it stay.
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
by
SGDesigns
Cheshire Cat ring inspired by Alice In Wonderland.
This ring is made thick and chambered for a better fit.
Engraved on the inside of the ring it says "We're all mad here.."
Ring size: 8.5
I will be adding more sizes soon. Feel free to email me for a specific size.
More sizes available below
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 11
Size 12
Size 13
by
SGDesigns
Vampire Skull Ring
This isnt your typical ring. Made thick and solid all the way around. This ring has a good amount of silver with a total weight of 1.5 oz. Personaly, I like solid, heavy rings. This is definitely not a hollow ring. This ring is massive with crazy detail. Highly detailed all the way around the entire ring. I'm very picky with my rings and detail is top priority. That being said, everything has to be perfect, especialy since I made this ring for myself. Ring comes in standard silver or silver glossy. The antique look or patina can be added as an aftermarket.
Material: 925 Sterling Silver
Size: 10
Weight: 42 grams
More sizes available below
Size 10
Size 11
Size 12
by
SGDesigns
Silver Demon Skull Bead
Hole size: 6mm
Estimated weight: 27 grams
The bead in the image above is in standard silver. I gave it a light polish and aftermarket patina.
If you want it patinated and polished, please contact me directly.
by
vertigopolka
My 3D printed small mesh purse (3.8 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a recloseable clasp. See my larger Medium Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap.
View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.
Due to size limitations, colors are no longer an option for this product. :(
Want to get a set
+ 
Want to get a set
+ 
View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.
Due to size limitations, colors are no longer an option for this product. :(
Want to get a set
(small purse and 36-inch strap)?
+ Want to get a set
(small purse and 45-inch strap)??
+ 
by
MichielCornelissen
PadFoot is the popular viewing stand for iPad 2, iPad 3 and iPad 4; for more information, go here.
Buy a wholesale pack of 4 PadFoots at up to 30% lower prices from this page. Product is shipped in basic Shapeways packaging.
Buy a wholesale pack of 4 PadFoots at up to 30% lower prices from this page. Product is shipped in basic Shapeways packaging.
by
cwestbrook
Please read the entire listing. Thank you!
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
kspaho
After playing around with the (Cage Edit Tool in Rhino), I was able to morph the straignt lines to create some ripples. What started as a simple opening, resulted in the 3D optical illusion. This feature is the only modified aspect of this phone case, while the rest of the architecture remains the same as the one of my earlier cases. Such designs offers a perfect fit for your phone, which I have tested for several months, as you can see on the following demo af an earlier design:
http://www.youtube.com/watch?v=7mrvn2xjp5k
by
Maundy
This original TriStand has been replaced by newer versions:
Please check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal- Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
The TriStand iPhone case is a stylish and rugged designer snap on case for your iPhone 4 or 4s which protects your iPhone with 3 flip out hinged integrated stands while keeping the thickness of the case at a modest 2.25mm (1.5mm at the sides); these stands can be used to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos!
The TriStand is 3D printed in a strong and rugged Polyamide material in the colours in the drop down box labelled 'Select Material' in the top right, these materials also have a grippy texture to them. Due to the amazing capabilities of 3d printing, the TriStand is printed fully assembled, so no assembly is required.
Watch the video in the above slideshow to see the case in action and a demonstration of how to use the case.
The intelligent design uses 'ball in socket' like catches to prevent the moving parts from opening by themselves in your pocket.
Guaranteed to fit all types of iPhone 4 and 4s.
Before installation, unclick all the moving parts and move all the moving parts back and forth gently, this may be quite hard at first due to excess printing material from the printing process however this will get easier quickly, however some of these hinges are designed to rotate only 90 degrees in each direction, do not force the moving parts more than this as this can result in damaging the hinges.
To install the case, push the top of the iPhone all the way into the top of the case and then clip the bottom two corners in and push them together to ensure a good fit.
Check out the TriStand Full Case which covers the whole back of the iPhone
Designed in the UK. This design is protected by the UK 'Design Right'.
© Alex Maund 2012
Please check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal- Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
The TriStand iPhone case is a stylish and rugged designer snap on case for your iPhone 4 or 4s which protects your iPhone with 3 flip out hinged integrated stands while keeping the thickness of the case at a modest 2.25mm (1.5mm at the sides); these stands can be used to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos!
The TriStand is 3D printed in a strong and rugged Polyamide material in the colours in the drop down box labelled 'Select Material' in the top right, these materials also have a grippy texture to them. Due to the amazing capabilities of 3d printing, the TriStand is printed fully assembled, so no assembly is required.
Watch the video in the above slideshow to see the case in action and a demonstration of how to use the case.
The intelligent design uses 'ball in socket' like catches to prevent the moving parts from opening by themselves in your pocket.
Guaranteed to fit all types of iPhone 4 and 4s.
Before installation, unclick all the moving parts and move all the moving parts back and forth gently, this may be quite hard at first due to excess printing material from the printing process however this will get easier quickly, however some of these hinges are designed to rotate only 90 degrees in each direction, do not force the moving parts more than this as this can result in damaging the hinges.
To install the case, push the top of the iPhone all the way into the top of the case and then clip the bottom two corners in and push them together to ensure a good fit.
Check out the TriStand Full Case which covers the whole back of the iPhone
Designed in the UK. This design is protected by the UK 'Design Right'.
© Alex Maund 2012
by
jeff
The apple came from a tree and thus a reunion is made on the back of your iPad 2.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
Other patterns available are Hexastar, Cubed, and Grid
A custom pattern to make the backside of your iPad 2 a bit more interesting. The iPad 2 Wrap literally wraps itself around each corner of your iPad, giving the corners & surfaces secure protection. The inherent texture of the 3D printed plastic provides increased grip while also being an extremely strong and durable material. The Apple Smart Cover protects the iPad front well, but leaves the back vulnerable to dirt and scratches. The wrap is the perfect compliment to the Smart Cover and the two work together flawlessly. Check out the video for fit & function.
Works only with iPad 2
The black finish is only recommended for use with the black Smart Cover (or no Smart Cover) as its dye can eventually rub off onto the cover.
If you have questions or comments about the design or would like to inquire about custom patterns to personalize it or for branding purposes please contact the designer, Jeff Bare, here.
by
SaGaDesign
A user-friendly adjustment to our award-winning Siri design, this iPhone 4/4s case is adjusted so as not to obscure the screen and can also function as an iPhone stand.
