A 00 gauge representation of the 1942-3 built warwell wagons used for moving tanks between military depots around the country. Though built for WW2 use, these lasted in service in a similar condition until the mid 1970's when they were rebuilt. These wagons usually ran in rakes with a ramp wagon marshalled at either end. This kit requires Ratio 125 Diamond frame bogies, as well as painting, transfers and couplings. These wagons are ideal for a first super detailing project such as fitting handbrake wheels, rivets and other finer details, without the added complexity of constructing the wagon body.

This is a UTV/ ATV Kawasaki 4010 Mule 4x4. Useful on any farm, construction site, job site, factory property or just out hunting. This is in 1/87 HO scale. This is the chassis, wheels, steering wheel and roll cage. You will need the body kit to go with this. Though the steering wheel didn't turn out so well. If you get a steering wheel kit from HERPA, it works very well. You will just need to drill a hole in the dash for it to fit into. Here is a pic to show what these look like put together and a steering wheel from HERPA added. *** It appears that ShapeWays has changed their dye process. They are now saying that the roll cage is JUST barely too thin to survive in their dye tumbler machines. Meaning this is now ONLY printable in WSF material. *** We @The Verse apologize for this setback.

This Z scale (1/220 scale) kit is based on an early 1970’s CAT 955 crawler loader (before mandatory ROPS requirement). It’s a midsized crawler loader with an operating weight of about 15 tons with a 130 horsepower diesel power plant and a 2 cubic yard general purpose bucket. -------------------------------------------------------------------------------------------------------------------------------------------------------------------NOTE: MODEL CAN ONLY BE PROPERLY PRINTED IN FROSTED ULTRA DETAIL MATERIAL. FEATURES ARE TOO SMALL FOR PRINTING IN OTHER MATERIALS. This kit has extremely small parts that can easily get lost forever in your carpet or floor, handle with great care. It is highly recommended you clean your kit parts in an ultrasonic cleaner with dawn dishwashing liquid (non bleach formula) and water mixture before painting and final assembly. For best results, airbrush parts in desired color scheme before final assembly. Most important, have fun building your kit and add it to your Z scale layout!

This Z scale (1/220 scale) kit is based on an early 1970’s CAT 980 open station Articulating wheel loader (before mandatory ROPS requirement). It has an operating weight of about 25 tons with a 260 horsepower diesel power plant and a 4.5 cubic yard general purpose bucket. Model can be built to articulate. Railings on this model are extremely fragile. See images for detailed instructions on how to remove plastic casing that protects the hand rails. ----------------------------------------------------------------------------------------------------------------------------------------------NOTE: MODEL CAN ONLY BE PROPERLY PRINTED IN FROSTED ULTRA DETAIL MATERIAL. FEATURES ARE TOO SMALL FOR PRINTING IN OTHER MATERIALS. This kit has extremely small parts that can easily get lost forever in your carpet or floor, handle with great care. It is highly recommended you clean your kit parts in an ultrasonic cleaner with dawn dishwashing liquid (non bleach formula) and water mixture before painting and final assembly. For best results, airbrush parts in desired color scheme before final assembly. Most important, have fun building your kit and add it to your Z scale layout!

A 1/24th scale version of a pneumatic jack. The jack is fully functional with rolling wheels, spinning back casters that also roll and up and down articulation. Even the lift plate rotates. These are functional upon printing and move very easily if they are soaked in isopropyl alcohol for 20 minutes (longer than an hour leaves a white film). This cleans off the suspension medium sticky fluid wax. If the stops for various heights no longer work, a little paint or vasoline on the stops in the back will bring them back

Lada Niva in 1:220 (Z)

This Z scale (1/220 scale) kit is based on an early 1970’s CAT D8K crawler bulldozer (before mandatory ROPS requirement). It’s a monster of its time, only second to the CAT D9. It has an operating weight of about 35+ tons with a 300 horsepower diesel power plant. The crawler’s width over tracks is 9.2 feet. It comes with a 13.3 foot wide standard U blade. ----------------------------------------------------------------------------------------------------------------------------------------------------------------NOTE: MODEL CAN ONLY BE PROPERLY PRINTED IN FROSTED ULTRA DETAIL MATERIAL. FEATURES ARE TOO SMALL FOR PRINTING IN OTHER MATERIALS. This kit has extremely small parts that can easily get lost forever in your carpet or floor, handle with great care. It is highly recommended you clean your kit parts in an ultrasonic cleaner with dawn dishwashing liquid (non bleach formula) and water mixture before painting and final assembly. For best results, airbrush parts in desired color scheme before final assembly. Most important, have fun building your kit and add it to your Z scale layout!

Designed for use with 25/28mm figures. Approximately 1/48 scale.

Modell Bergeleo (Büffel) in Scale 1/160. Montage: Durchmesser der Aufnahmebohrung dem Durchmesser des Kranfußes anpassen. Die Gelenkbohrung VORSICHTIG! mit einem 0,5mm Bohrer aufbohren. Haken erstellen und an Flaschenzug anbringen.

It is a scale model of Willis MB used in U.S. Army. This model can choose the state where it closed with the state where the hood was opened.  In addition, the parts of two kinds of machine guns are attached. This model is a sectional kit. Please assemble it in reference to an assembling manual.

Bedroom furniture designed to be printed in White Strong & Flexible. Enough for two bedrooms with extras left over. I have included both flat screen and tube style TVs.

Figures not included. Delivered unpainted.

UPDATE: May 21, 2013. This model should print again The pictures posted are of the test print I obtained. Unless the description says it has not been test printed all models I offer for sale have successfully test printed.

Each time a model is printed Shapeways does a manual check. At times the second, third, or later check reveals a problem that was not flagged earlier. When I am notified of a problem I remove the model for sale and correct the flagged problems, then place it back on sale. Unfortunately there is no mechanism that allows me to make the changes prior to Shapeways cancelling the customer’s order. I apologize to any customer who has an order cancelled and continually work to improve the designs I offer for sale.

Model T Ford Runabout based off from information on a mid series (1916-1922) Model T. Engine, transmission and suspension are modeled. Some of the smaller bits were left off due to the limitations of the materials.

Es handelt sich hier nur um den Aufbau des TLF(Teile auf der 3D Zeichnung), die anderen Teile (Kabine, Fahrgestell, Reifen usw.) müssen extra bestellt werden. Aus allen dieser Teile kann ein "Unimog" von anderen Herstellern umgebaut werden.

W50 Kipper / Dumper in Z, 1:220

A bunch of Living Room stuff to put into your houses. The test print came in with a little bit of breakage- mainly the legs of one chair that I will beef up shortly, and the pedals on the baby grand, which is fixable.

I designed this for WSF material to keep the cost down, but you can still see the balls on the pool table.

Delivered unpainted. Figure not included.

UPDATE: May 21, 2013. Each time a model is printed Shapeways does a manual check. At times the second, third, or later check reveals a problem that was not flagged earlier. When I am notified of a problem I remove the model for sale and correct the flagged problems, then place it back on sale. Unfortunately there is no mechanism that allows me to make the changes prior to Shapeways cancelling the customer’s order. I apologize to any customer who has an order cancelled and I continually work to improve the designs I offer for sale.

Spur TT 1:120 10 Stück IBC Container zum Transport von Flüssigen Stoffen

This is a support-less ascending staircase model that was made in Blender3D.

1:55 Scale tires and wheels based on the bias ply tire for the HMMWV - Humvee. Included are tires with detailed treads and wheels including lug nuts and other details. Each wheel includes a hole on the back to allow for easy attachment of the wheel to a model. These parts are appropriate for 28 mm wargame figures and similar sized vehicles.

1:72 scale bike, designed for Manoeuvre Group Wargames rules.

Four generic dirtbikes, suitable for use in any 25mm/1:72 scale game.

Suggested material: SWF

sIG33 15cm Heavy infantry cannon is a main cannon used during World War II in the German military. This model is a sectional kit. Please assemble it in reference to an assembling manual.

The Panhard AML 60/90 is a light 4x4 armoured reconnaissance car build by France. It is either armed with a breech loading 60 mm mortar (AML 60) or a low velocity 90 mm gun (AML 90), its secondary armament is comprised of two 7.62 mm machine guns. It was used extensively by France in Algeria, Portugal in its oversea conflicts in Angola, Mozambique, and Guinea-Bissau, Argentina on the Falkland Islands (Battle of Wireless Ridge), Lebanon in its civil war, and El Salvador. It had a crew of three, a 90 hp engine capable of achieving a speed of up to 90 kmh.