by
TheoJansen
The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
by
curvecreative
Nanolet
Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.
The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.
Featured on: Mashable , Cult of Mac , Yanko Design and many more.
Suitable for medium sized wrists. Available in a range of colors
Medium is for a wrist of circumference 165mm - 185mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. Maximum wrist size is 190mm.
Unboxing Video here
Click here for OTHER SIZES
Click here to visit our site
Or click here to keep up to date on Facebook
Interested in buying Nanolets in BULK at reduced price? For LARGE , MEDIUM and SMALL
by
TerraCotta
If M.C. Escher had owned fidget toys, he would have worn "One ring to rule the ball" as a pendant. A single, continuous line contains a small ball that makes orbit after mesmerizing orbit but cannot escape, always held down in four directions. Available in solid, durable stainless steel with optional antique bronze and gold plated finishes to fit any context, "One ring to rule the ball" now also includes a free rubber necklace so that you can confuse your mind any time the fancy strikes you! One customer echoes many others in saying, "I couldn't put it down. This thing is just too fun!"
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
nervoussystem
A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.
It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.
Watch the video below to see the the form was created.
--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
If you purchase directly from Shapeways it will not come with a chain.
by
virtox
The tale of the sneak eating it's own tail, where did it end?
Medium pendant available in multiple materials, displayed in Antique Bronze Glossy.
(Necklace not included.)
Inner diameter ~ 1,5cm
Outer diameter ~ 3,5cm
Depth ~ 1,2 cm
For robustness this version is not completely free floating like the sculpture
A smaller pendant is also available here.
Medium pendant available in multiple materials, displayed in Antique Bronze Glossy.
(Necklace not included.)
Inner diameter ~ 1,5cm
Outer diameter ~ 3,5cm
Depth ~ 1,2 cm
For robustness this version is not completely free floating like the sculpture
A smaller pendant is also available here.
by
Ammnra
Ring based on Assassin's Creed Apple of Eden
US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
by
roofoo
Default is 19 mm band (size 9 US). Send me a message if you need a different size!
by
MichielCornelissen
This is the product page for Pod à porter for the 3d generation iPod shuffle. For the 4th generation shuffle, go here.
In the street or at the beach: Pod à porter is the easiest way to wear your music, even when you’re not wearing much.
No more wire-tangle, earphones dangling by your knees, or ripping buds from your ears when you take off your jacket. Fits the 3d generation iPod shuffle and the Apple earphones it ships with; Pod à porter is available in various colors, as shown below.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can even sign in with twitter or facebook. Each ordered product is 3d-printed especially for you, price includes free worldwide shipping.
Pod à porter is manufactured from tough, but flexible polyamide, with a fine texture. Check the support/materials section of this website for more information. The product has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off. Product is shipped in basic Shapeways packaging.
Check www.michielcornelissen.com for assembly instructions and more information. If you have any feedback or questions on this item, please feel free to contact me directly at michiel@michielcornelissen.com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very Smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
In the street or at the beach: Pod à porter is the easiest way to wear your music, even when you’re not wearing much.
No more wire-tangle, earphones dangling by your knees, or ripping buds from your ears when you take off your jacket. Fits the 3d generation iPod shuffle and the Apple earphones it ships with; Pod à porter is available in various colors, as shown below.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can even sign in with twitter or facebook. Each ordered product is 3d-printed especially for you, price includes free worldwide shipping.
Pod à porter is manufactured from tough, but flexible polyamide, with a fine texture. Check the support/materials section of this website for more information. The product has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off. Product is shipped in basic Shapeways packaging.
Check www.michielcornelissen.com for assembly instructions and more information. If you have any feedback or questions on this item, please feel free to contact me directly at michiel@michielcornelissen.com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very Smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
vertigopolka
This bauble is made of three nested truncated icosahedrons, or buckyballs.
Check out my other pendant models in my Jewelry/Pendant section.
Check out my other pendant models in my Jewelry/Pendant section.
by
lwi
A minimal hollow cubic pendant with 3 square holes at one of the corners.
Pure, Perfect !
Pure, Perfect !
by
virtox
Inspired by a humble form, but it's nobular extensions tickle the imagination as to what it resembles most.
This cup can hold a maximum of 90 ml, but is designed to hold a double espresso.
Part of the "coffee not included" series.
This cup can hold a maximum of 90 ml, but is designed to hold a double espresso.
Part of the "coffee not included" series.
by
euphy
65mm hole - can easily increase for less tiny hands. This is thick, strong and slightly squishable.
by
Mitus
Ring size 9 (available in all sizes).
Under the personalize button to choose your ring size.
For further information please consult the Ring Size Chart
NOTE: This is only the ring bases, to complete the ring you need the components M003 available at http://shpws.me/5xu
Under the personalize button to choose your ring size.
For further information please consult the Ring Size Chart
NOTE: This is only the ring bases, to complete the ring you need the components M003 available at http://shpws.me/5xu
