by
fakebusker83
Version 1.5
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
by
fakebusker83
Version 1.5
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
by
OneSaveSolutions
This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design.
It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.
by
lorddragonmaster
Version 4
This is a completely show accurate weapon for TF: Prime Voyager Optimus Prime. This is the legendary Star Saber, featured in season 2 of TF:Prime. Weild the power of the Primes with a weapon that towers over Optimus himself!
The sword and handle separate and will fit into the 5mm hands of any Transformer.
The blade measures 186 mm in length and is an imposing sight for any Decepticon.
This model has been successfully tested in WSF and FUD!
Please note the sword does not come in colour/or painted.
by
Drawn-SteelHero
Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
by
Drawn-SteelHero
Fearsome-looking machine gun converts into a 56mm robot action figure with 10 points of articulation.
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214
If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214
If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!
by
fakebusker83
Version 3.0
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
by
Drawn-SteelHero
Powerful hand-held thermal cannon converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of two handles, either of which can be glued in to the mounting point on the figure's back. Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Supplied as a 16-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions coming soon...
Gun mode comes with a choice of two handles, either of which can be glued in to the mounting point on the figure's back. Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Supplied as a 16-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions coming soon...
by
fakebusker83
Version 1.5
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
by
FanaticAlley
This ring is Inspired by the infamous symbol of the Deathly Hallows and is 3D printed to order by Shapeways in your choice of materials (Stainless Steel is pictured, my favorite)
The ring is sent directly to you though UPS in about 15 days, add to your cart to view shipping costs.
You'll be able to select from U.S. ring sizes 5 6 7 8 9 10 11 or 12 (Click the link for the size you need, This default listing is for a size 9) Don't know your ring size? Find it Here
Thanks for checking it out! Be sure to see the rest of my shop for other sizes and designs! :)
If you have any questions about any of my Harry Potter inspired designs feel free to ask, you can message me here on Shapeways or you can also find me on twitter at: @HallowsNecklace
The ring is sent directly to you though UPS in about 15 days, add to your cart to view shipping costs.
You'll be able to select from U.S. ring sizes 5 6 7 8 9 10 11 or 12 (Click the link for the size you need, This default listing is for a size 9) Don't know your ring size? Find it Here
Thanks for checking it out! Be sure to see the rest of my shop for other sizes and designs! :)
If you have any questions about any of my Harry Potter inspired designs feel free to ask, you can message me here on Shapeways or you can also find me on twitter at: @HallowsNecklace
