by
Oskar_van_Deventer
CAUTION: FOUR SPECIAL EDGES ONLY. Anisotropic Cube is a modification of Oskar's Gear Cube that is being sold by Mefferts.com. Buy a Gear Cube and replace four of the gearing edges by these four pieces. The result is a puzzle that has all the gearing fun of Gear Cube, but much harder to solve.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
These are just the four special pieces. If you want to buy the full puzzle, assembled and sticked, then search the internet for Mefferts and "Gear Cube Extreme".
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
These are just the four special pieces. If you want to buy the full puzzle, assembled and sticked, then search the internet for Mefferts and "Gear Cube Extreme".
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
virtox
A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
by
s_f_x
A beautiful translucent tea candle light which will look great on any table. The sleek and simple design goes well with many styles. The petals are quite thin to let the light through, yet the model is not overly fragile.
This light has been successfully tested with standard sized tea candles. However, as this model is made of plastic, use the usual safety precautions when using with candles and fire - never leave unattended, keep away from combustible material, and keep out of the hands of children.
This light has been successfully tested with standard sized tea candles. However, as this model is made of plastic, use the usual safety precautions when using with candles and fire - never leave unattended, keep away from combustible material, and keep out of the hands of children.
by
virtox
The full-color version of the double gyroid bones!
Printed as two separate but intertwining parts.
Please see video above.
This principle is also available as a candle stand.
Please contact me if you require custom texture mapping.
Printed as two separate but intertwining parts.
Please see video above.
This principle is also available as a candle stand.
Please contact me if you require custom texture mapping.
by
printedCat
This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and
printed in nylon material by Shapeways.com in Holland or New York.
Enjoy watching!
All images are photos of real objects. "Proof Printed".
printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook
Enjoy watching!
All images are photos of real objects. "Proof Printed".
printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook
by
VENERIDESIGN
Flower Pump is inspired by the muscle of love,
...every artery leads straight to the heart ....
...every artery leads straight to the heart ....
by
Dotsan
5cm Hoodie is the creation of Culprit art, you can check out his blog here: Culprit Toys and here Culprit Art , the pattern is from Jon Burgerman.
Hoodie comes in many variations and can be found in the Dot San shop.
More Hoodies:
Burgerman Hoodies, 7cm, 5cm & 2cm
Plain Hoodies
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm
Customized
Hibs Hoodie 7cm
Hearts Hoodie 7cm
The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.
www.dotsan.com
Hoodie comes in many variations and can be found in the Dot San shop.
More Hoodies:
Burgerman Hoodies, 7cm, 5cm & 2cm
Plain Hoodies
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm
Customized
Hibs Hoodie 7cm
Hearts Hoodie 7cm
The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.
www.dotsan.com
by
Dimmulain
IMPORTANT INFORMATION!!!
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
by
badulaques
"I miss you!" Bracelet. This piece is an expression of feeling the absence of a beloved and irreplaceable. A friend, a father, a mother, a boyfriend or girlfriend, even a beloved pet. This is a delicate and playful gift of love.
This bracelet has Ø77mm on the inside or 24cm of it's internal circunference's length as standard measures. To select between others measures click "Personalize".
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Este bracelete tem Ø77mm no interior ou 24 cm de seu comprimento circunferência interna como medidas-padrão. Para selecionar, entre outras medidas, clique em "Personalize".
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
This bracelet has Ø77mm on the inside or 24cm of it's internal circunference's length as standard measures. To select between others measures click "Personalize".
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Este bracelete tem Ø77mm no interior ou 24 cm de seu comprimento circunferência interna como medidas-padrão. Para selecionar, entre outras medidas, clique em "Personalize".
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
by
aeron203
The moon is now customizable. 1.5 inches wide. The placement and orientation of the loop can be set to your preference.
by
rinblad
A pendant in the shape of a tree, with some of the roots creating a garland around it. This unique pendant can stand on a surface or be hung in a necklace for any occasion. Currently on display in the 3DEA popup store at the Eventi hotel.
by
cooldjez
This is an awesome looking ring, but it's still comfortable to wear.
Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.
Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.
by
FFmodels
A sexy oil warmer for use with tea light candels.
Requires a glass dish from an oil warmer.
Model shown is printed in Alumide for heat resistance.
Requires a glass dish from an oil warmer.
Model shown is printed in Alumide for heat resistance.
by
thehumanhive
A ball consisting of twelve gears that rotate interdependently. Once assembled, the ball measures 4.3 cm in diameter (4.3 cm x 4.3 cm x 4.3 cm).
by
Whystler
This orrery is a fully functional model of the 4 terrestrial planets: mercury, venus, earth, and mars. Ideal for planning your next interplantary voyage on your star-galleon. The planets can be moved to show their orbital placement around the sun. Each planet is sized relative to each other. The size of the sun and diameter of the orbits are not accurate, for display purposes. Working planetary models have existed in various forms since 90 BC. The orrery was given it's name in the 17th century after an Earl who ordered a clockwork copy. Now you can have your own! This piece is nearly 6 inches tall, the working sphere being 4 inches in diameter.
by
PeterHermans
This shade can be clicked directly on to a fluorescent light tube. The variation in thickness makes for a nice translucent effect. Inspiration for this design came from phototaxis: the attraction to light that insects such as moths have. That, and the observation that the boring 'bare' light tube in my girlfriend's kitchen could use a touch of creativity.
This version is fit for T8-tubes (1" in diameter). More versions, including other butterflies will follow.
This version is fit for T8-tubes (1" in diameter). More versions, including other butterflies will follow.
by
frank
I ordered a test print to be sure that everything works the way it was supposed to be.
When it arrived it was not perfectly round but slightly deformed. I guess it is impossible to ship this thing in a packet without deforming it...
Nevertheless this is a nice toy to play around with. It can be squeezed or thrown against walls - In spite of it´s fine structure it is pretty sturdy.
When it arrived it was not perfectly round but slightly deformed. I guess it is impossible to ship this thing in a packet without deforming it...
Nevertheless this is a nice toy to play around with. It can be squeezed or thrown against walls - In spite of it´s fine structure it is pretty sturdy.
by
rinblad
An ornament in the shape of a tree, with some of the roots creating a garland around it. This ornament can stand on a surface or be hung in a window, in a tree or on a door. The branches produce a beautiful pattern regardless of which angle you view it in. All the lines is flowing and come together in harmony.
Please note that the "White Strong & Flexible" material will turn yellowish if you leave it in the sun. If you're going to hang it in a window, make sure it faces the side of the building with most shadow.
by
pittance
Make your own 3D halftone picture from a grid of dots, all you need is a picture.
I've included a photo of one of the prints when mounted & framed against a dark background - it's just for illustration, you won't get this with your order!
(to keep the price down this model can't use more than the 30 x 30 (=900 in total) dots I used in the Halftone models I photographed for the illustration above - I will process your photo to make it the right size, if you would like a preview please email me: shapeways@fastness.co.uk )
by
schreerdesign
The iShark is an iPhone 'gramophone.' It magnifies the tiny speaker on your iphone when you pop it in the slot in the iShark's back (and also making your iPhone a dorsal fin). The sound emerges from the iShark's mouth. The blue color image is a suggested paint scheme, but you can paint it to match your favorite species. It has been modeled hollow to save cost to you.
by
vertigopolka
My 3D printed medium mesh purse (6.3 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a reclosable clasp. See my smaller Small Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap. View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.
Want to get a set
+ 
Want to get a set
+ 
Want to get a set
(medium purse and 36-inch strap)?
+ Want to get a set
(medium purse and 45-inch strap)?
+ 
by
virtox
An intimate and precious gift for that special anyone!
Your name or message in braille on a symbol of eternity.
Available in sizes from 16 to 22mm. (Internal ring diameter)
Recommended material : Silver (Glossy)
It is the only material with enough resolution to capture the full detail of this fine braille.
Technical details:
This 3 mm wide ring contains a very fine 6-dot braille.
Dot diameter is 0.8mm and the spacing within one cell is 0.2mm, space between cells is 1.2mm.
A 5mm version is here.
More rings
Pendants
Bracelets
Your name or message in braille on a symbol of eternity.
Available in sizes from 16 to 22mm. (Internal ring diameter)
Recommended material : Silver (Glossy)
It is the only material with enough resolution to capture the full detail of this fine braille.
Technical details:
This 3 mm wide ring contains a very fine 6-dot braille.
Dot diameter is 0.8mm and the spacing within one cell is 0.2mm, space between cells is 1.2mm.
A 5mm version is here.
More rings
Pendants
Bracelets
by
swirlingbrain
I revised the Christmas Ornament RBS to have just a little more slope. I'm hoping it's enough to have the marble roll without problem. I added a few new things. This one has a circular base so that it should stand on its own. I also beefed up the frame to make it more durable. There's less rungs and a few more braces. I will have to print it and test it. If you just want one even though it hasn't been tested, please feel free to order but you're on your own. http://www.rollingballsculpture.net
You can see video of it here: http://www.youtube.com/watch?v=qUlLRtTp050
You can see video of it here: http://www.youtube.com/watch?v=qUlLRtTp050
by
chd
A 3d pixel rendering... Feedback appreciated
by
michaellla
The Chrysanthemum centrepiece is a reversible design that can function as either a bowl or a candle holder, depending on which side of the design faces upwards. The centrepice is lit using a LED tealight, a light source that produces no heat.
The Chrysanthemum is directly manufactured with the EOS P380 using the PA2200 polyamide material.
An new version of this design now part of the .MGX by Materialise Collection.
http://www.mgxbymaterialise.com/component/one/mgxmodel/detail/detail/73
The Chrysanthemum is directly manufactured with the EOS P380 using the PA2200 polyamide material.
An new version of this design now part of the .MGX by Materialise Collection.
http://www.mgxbymaterialise.com/component/one/mgxmodel/detail/detail/73
by
TerraCotta
Smooth, curving lines of steel gently draw your gaze and mind to this unique 10 cm desk toy. Made from solid, durable stainless steel for lasting quality, it holds a spinning axle or gravity toy of your choice on pinpoint pivots. A fully customisable nameplate makes this the most unique and personal desk toy in the world--as with all Terra Cotta co-creators (unless specifically labelled otherwise) the text you choose may be in any language or character set on earth. Options include a floating globe, a smooth spiral that dances with your mind, and a spinning version of the design from http://www.shapeways.com/model/52936/one_ring_to_rule_the_ball.html , with a surprising secret. Add this design to your favourites and check back soon to see more styles, options, and accessories; or search for the tag "Ultimate Desk Toy" to see individual pieces you can mix and match to your heart's content. Part specifications will soon be released under a creative commons license so that you can display your own designs in this holder, too! Price includes shipping anywhere in the world. Click through the images or visit our website at http://www.terracottapf.com to learn more.
by
alienology
Designed by using particle systems in 3D CAD software this bracelet is now available in its final form. Threads visible here are about 1mm thick.
This version of bracelet is in cuff form, designed to flex into various sizes and to fit and wrap around your wrist.
This version of bracelet is in cuff form, designed to flex into various sizes and to fit and wrap around your wrist.
by
virtox
Two stranded spirals, finding their way back together.
A bendy and trippy decorative piece designed for the Strong & Flexible materials.
Limited edition, sold out.
Photographs don't do it justice, it's an eye-catching treat for the senses.
Check out the video!
A bendy and trippy decorative piece designed for the Strong & Flexible materials.
Limited edition, sold out.
Photographs don't do it justice, it's an eye-catching treat for the senses.
Check out the video!
by
mendelheit
This bust represents the ancient King Polygon, system administrator of a country far far away. He was very appreciated by his fellas, because of his calm and kindness. Actually, his secret was a good amount of sleep.
But even as a nice king, he had to take care of many wars and conflicts. His biggest enemy was Lord Nurbs, who always wanted to make things complicated. The night before their last big combat, King Polygon fell asleep and never woke up.
Thus, this bust is dedicated to the brave King Polygon.
(and this is my entry for the Faces Contest!:)
But even as a nice king, he had to take care of many wars and conflicts. His biggest enemy was Lord Nurbs, who always wanted to make things complicated. The night before their last big combat, King Polygon fell asleep and never woke up.
Thus, this bust is dedicated to the brave King Polygon.
(and this is my entry for the Faces Contest!:)
by
trompevenlo
More information and ordering at:
www.trompe.nl
The Scrappies - A series of originally designed small sculptures in scrap metal-look.
The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.
The figurines are worked out in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.
Height (with stand): 16 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from a gypsum-based, full-colored composite.
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
