by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
MichielCornelissen
Tool, symbol or both?
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
by
VENERIDESIGN
Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com for shipping address.
Thank you.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com for shipping address.
Thank you.
by
TheoJansen
The first public evolution of the Animaris Geneticus Parvus, #5. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros". The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet.
- The best way to push it is by its nameplate. Do not push down, but forward
by
MichielCornelissen
Both a tribute to ubiquitous, and lovely, hexagonal colour pencils, and a representation of what was coined by Joris Peels as 'combinatory manufacturing'.
Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.
Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.
Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.
Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.
by
richgain
This must surely be the smallest commercially available 3D puzzle cube in the world.
It is a tiny 7.5 mm across and presents a real challenge to solve and take apart - and not just because of its size.
It is an example of a sequentially interlocking cube which means that it won't fall apart once the pieces are slotted together.
You can find many more interlocking puzzle cubes in the microcubology shop.
The puzzle was inspired by the cover of Elbow's brilliant album, The Seldom Seen Kid.
It is a tiny 7.5 mm across and presents a real challenge to solve and take apart - and not just because of its size.
It is an example of a sequentially interlocking cube which means that it won't fall apart once the pieces are slotted together.
You can find many more interlocking puzzle cubes in the microcubology shop.
The puzzle was inspired by the cover of Elbow's brilliant album, The Seldom Seen Kid.
by
nervoussystem
The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling.
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.
Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.
Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp. We will send them to you free of charge if you purchase the lamp shade.
by
Bathsheba
A sculpture. Contrary to popular belief, it is not an algorithmic object.
by
trompevenlo
I would like to introduce to you the sculpture »You & Me« from the »Scrappies« figurine family. It represents love, affection and mutual commitment - emotions that everyone values and never lose their significance.
The »Scrappies« are inspired by everything you can find in a scrapyard: old nuts and bolts, tin cans, pipes, coils, parts of ball bearings.
But they are actually manufactured in a totally different, novel »3D printing« process. Each of them is made in one piece from fine metal powders.
I had initially made the »You & Me« sculpture as a unique gift for our 30th wedding anniversary, but when Christiane placed the Scrappies on her office desk, her collegues loved them so much that we thought why not share it and make it available to others.
Therefore, and for a limited time, I am offering you my work here, outside of the traditional channels of exhibiting and selling art. Each figurine will be customized with your initials of choice. I will make and ship a unique »You & Me« sculpture for every supporter, be it one or many.
by
nervoussystem
A striking cellular cuff inspired by microscopic cellular structures and created using computer simulation and 3d-printing.
this bracelet is size MEDIUM
also available in size LARGE
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
this bracelet is size MEDIUM
also available in size LARGE
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
by
Admiral
An incredibly talented artist friend of mine (Chantell Hager; http://phantasyfaces.com/) drew some pictures of a dragon for me, so I might model this creature in 3D for fun and practice. Seeing as how it is a decently cool model, I thought I'd surprise her with a pendant of the model in return. This is a slight revision on my first Shapeways model. Some of the details that I had designed into the model were too small to show up in this size, so I revised the model to accentuate some of those features.
by
aeron203
A clock frozen in time, the Time Keeper commemorates a birth date, an anniversary, or any other significant moment in your life, in history, or the future. It will keep that time with perfect accuracy, forever. You set the date and time. You can also include a short message below the date.
UPDATE: The Time Keeper has been thickened 50% to ensure printability.
UPDATE: The Time Keeper has been thickened 50% to ensure printability.
by
GothamSmith
Even if your neighbors complain, you can keep it turned up on your sleeves.
by
MichielCornelissen
CableGuy is currently not available through the Shapeways site. My new product The Wrap, a handy cable winder for the European iPhone charger, can be found here.
CableGuy - cable winder and clip for Apple earphones
Many of us are familiar with two little issues related to the earphones we use with our iPhones and iPods. First, what do you do with ‘m when you’re not using them; and second, where do they go when you take out your buds for a few seconds.
CableGuy solves both of these problems for the Apple earphones that our iGadgets come with. The earbuds and plug find a home in the slots in CableGuy, while the cable can be wound neatly (or not so neatly, if you prefer) around it - making cable spaghetti a thing of the past.
But that’s not all. Clip it to your t-shirt, shirt pocket or bag, and CableGuy keeps your earphones from dropping to the floor when you’re on pause, using either the build-in cable clip or the earbud-fitting slots.
CableGuy - cable winder and clip for Apple earphones
Many of us are familiar with two little issues related to the earphones we use with our iPhones and iPods. First, what do you do with ‘m when you’re not using them; and second, where do they go when you take out your buds for a few seconds.
CableGuy solves both of these problems for the Apple earphones that our iGadgets come with. The earbuds and plug find a home in the slots in CableGuy, while the cable can be wound neatly (or not so neatly, if you prefer) around it - making cable spaghetti a thing of the past.
But that’s not all. Clip it to your t-shirt, shirt pocket or bag, and CableGuy keeps your earphones from dropping to the floor when you’re on pause, using either the build-in cable clip or the earbud-fitting slots.
by
thehumanhive
A tribute to papercraft artist Haruki Nakamura's sculpture, Gear's Heart. The assembled heart measures 8.5 cm in height (8.5 cm x 8.2 cm x 5.1 cm).
by
Bathsheba
by
Whystler
The "tertiant" is a simple astrolabe similar to the quadrant or sextant. It is useful for measuring unreachable altitudes, discovering local latitude, and finding the average of inclines.
This is the only Tertiant known to exist. The quadrant and sextant measure angles less the 90 degress. This astrolabe measures a full 120 degrees allowing the intrepid airship explorer to aim not only above, but also below.
Instructions: Look through the eyepiece, and line up your target with the sites (ie. north star for latitude, the top of a building or tree for altitude). When you do this, the dial will adjust itself by gravity to point out a degree on the guage. Zero is indicated by the vertical bar. Each second degree is marked by a small bar at the bottom of the guage, and these are grouped in ten degrees.
note: Before I release this for sale, I will be adding numbers on the guage, a ring at the top for hanging, and a ring on the end of the dial to hang a weight for more accurate readings.
This is the only Tertiant known to exist. The quadrant and sextant measure angles less the 90 degress. This astrolabe measures a full 120 degrees allowing the intrepid airship explorer to aim not only above, but also below.
Instructions: Look through the eyepiece, and line up your target with the sites (ie. north star for latitude, the top of a building or tree for altitude). When you do this, the dial will adjust itself by gravity to point out a degree on the guage. Zero is indicated by the vertical bar. Each second degree is marked by a small bar at the bottom of the guage, and these are grouped in ten degrees.
note: Before I release this for sale, I will be adding numbers on the guage, a ring at the top for hanging, and a ring on the end of the dial to hang a weight for more accurate readings.
by
kspaho
Ever lose the little plate with nowhere to put your cup of espresso? It's confusing. Designed to eliminate the need for a plate or coaster, the plateless espresso cup can sit directly on the table without leaving a ring behind. Without the plate, you can move from room to room with your espresso and still have one free hand. You'll find yourself wondering why espresso cups ever got involved with the little plates in the first place. Can hold up to 90ml.
by
virtox
The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
by
richgain
This cube really is something quite special.
About a year ago, after seeing the Transformers movie, I was inspired, by the behaviour of the alien technology in the AllSpark cube, to try and design a puzzle that could expand equally in all directions. To make things even harder, I wanted each piece to be locked in place by the preceding move.
After many prototypes I finally succeeded in creating this unique sculpture consisting of six parts.
The first stage in solving the puzzle involves discovering how the pieces fit together in the expanded configuration. (One of these moves includes a rotation, which makes it much harder to crack by computer!)
The second stage is to collapse the expanded cube down to the smaller cube by pressing each of the faces in the correct sequence.
The name of the puzzle comes from a (now obsolete) alternative to the Big Bang Theory proposed by Fred Hoyle. I like the fact that from its expanded, steady state the cube can either collapse inwards or explode outwards.
© Richard Gain 2008
About a year ago, after seeing the Transformers movie, I was inspired, by the behaviour of the alien technology in the AllSpark cube, to try and design a puzzle that could expand equally in all directions. To make things even harder, I wanted each piece to be locked in place by the preceding move.
After many prototypes I finally succeeded in creating this unique sculpture consisting of six parts.
The first stage in solving the puzzle involves discovering how the pieces fit together in the expanded configuration. (One of these moves includes a rotation, which makes it much harder to crack by computer!)
The second stage is to collapse the expanded cube down to the smaller cube by pressing each of the faces in the correct sequence.
The name of the puzzle comes from a (now obsolete) alternative to the Big Bang Theory proposed by Fred Hoyle. I like the fact that from its expanded, steady state the cube can either collapse inwards or explode outwards.
© Richard Gain 2008
by
cunicode
one cup a day
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
by
sevensheaven
A full-color, high-quality 3D-printed bust of the legendary, celebrated former Apple founder and CEO Steve Jobs, modeled and textured in a retro 3D pixel style by the Dutch Sevensheaven design studio.
Having this remarkable and unique gadget on your desk will undoubtedly make your friends and colleagues very jealous and earn you eternal respect.
Combine Steve Jobs with the also available Steve Wozniak bust to reunite the founding fathers of Apple on your desk.
Having this remarkable and unique gadget on your desk will undoubtedly make your friends and colleagues very jealous and earn you eternal respect.
Combine Steve Jobs with the also available Steve Wozniak bust to reunite the founding fathers of Apple on your desk.
by
nervoussystem
Inspired by the complex forms of radiolarians, where intricate pattern is integral to structure, these shapes derive from a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure.
Made to order in your size.
by
Oskar_van_Deventer
CAUTION: FOUR SPECIAL EDGES ONLY. Anisotropic Cube is a modification of Oskar's Gear Cube that is being sold by Mefferts.com. Buy a Gear Cube and replace four of the gearing edges by these four pieces. The result is a puzzle that has all the gearing fun of Gear Cube, but much harder to solve.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
These are just the four special pieces. If you want to buy the full puzzle, assembled and sticked, then search the internet for Mefferts and "Gear Cube Extreme".
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
These are just the four special pieces. If you want to buy the full puzzle, assembled and sticked, then search the internet for Mefferts and "Gear Cube Extreme".
by
virtox
A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
s_f_x
A beautiful translucent tea candle light which will look great on any table. The sleek and simple design goes well with many styles. The petals are quite thin to let the light through, yet the model is not overly fragile.
This light has been successfully tested with standard sized tea candles. However, as this model is made of plastic, use the usual safety precautions when using with candles and fire - never leave unattended, keep away from combustible material, and keep out of the hands of children.
This light has been successfully tested with standard sized tea candles. However, as this model is made of plastic, use the usual safety precautions when using with candles and fire - never leave unattended, keep away from combustible material, and keep out of the hands of children.
by
virtox
The full-color version of the double gyroid bones!
Printed as two separate but intertwining parts.
Please see video above.
This principle is also available as a candle stand.
Please contact me if you require custom texture mapping.
Printed as two separate but intertwining parts.
Please see video above.
This principle is also available as a candle stand.
Please contact me if you require custom texture mapping.
by
VENERIDESIGN
Flower Pump is inspired by the muscle of love,
...every artery leads straight to the heart ....
...every artery leads straight to the heart ....
by
printedCat
This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and
printed in nylon material by Shapeways.com in Holland or New York.
Enjoy watching!
All images are photos of real objects. "Proof Printed".
printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook
Enjoy watching!
All images are photos of real objects. "Proof Printed".
printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook
by
Dotsan
5cm Hoodie is the creation of Culprit art, you can check out his blog here: Culprit Toys and here Culprit Art , the pattern is from Jon Burgerman.
Hoodie comes in many variations and can be found in the Dot San shop.
More Hoodies:
Burgerman Hoodies, 7cm, 5cm & 2cm
Plain Hoodies
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm
Customized
Hibs Hoodie 7cm
Hearts Hoodie 7cm
The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.
www.dotsan.com
Hoodie comes in many variations and can be found in the Dot San shop.
More Hoodies:
Burgerman Hoodies, 7cm, 5cm & 2cm
Plain Hoodies
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm
Customized
Hibs Hoodie 7cm
Hearts Hoodie 7cm
The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.
www.dotsan.com
by
Dimmulain
IMPORTANT INFORMATION!!!
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
