by
nervoussystem
A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.
It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.
Watch the video below to see the the form was created.
--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
If you purchase directly from Shapeways it will not come with a chain.
by
colleenjordan
A small necklace to carry plants with you throughout the day. Works well with a small succulent planted inside, or fresh picked flowers. When this is printed in Shapeways' detail materials, it is watertight and can accommodate a plant with some water.
If you purchase this item from our Shapeways shop, please email hello [at] wearableplanter.com and we will send you your choice of leather or cotton cord to go with your necklace, as well as instructions on how to add plants.
by
virtox
Cubichain bracelet (for custom sizes)
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
LincolnK
These filigree earrings look delicate almost like lace, yet are flexible and very resilient and should last you a life time assuming a monkey doesn't eat them. They are so light that you wouldn't even know you are wearing them.
Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.
Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.
by
jasolo
This Universal Equinoctial Ring Dial 2 is a portable and self-orientating sundial. You can see how a similar dial works: http://www.sunwatchmaker.com/instructions.php .
This is an improved version of a previous model:
http://www.shapeways.com/model/132928/universal_ring_dial.html
You'll receive five parts unconnected and undyed. Follow these instructions:
1. Clean the parts with cold water and soft brushing to remove support material remaining from the 3d printing.
2. Dip the parts in cold tea for a couple of hours. Holes will get more dyed because of the support material trapped in them. The slider part doesn't have marks, but with the dying will get as yellowish as the other parts.
3. Paint with black ink the marks. Let dry the ink and then remove it with a wet sheet. This way, ink only remains in the marks. In the photo the slider and some zones of the rings weren't inked so they maintained the yellow tone because tea dyes all no flat surfaces. The hour ring has marks on both sides, but only one needs to be dyed.
4. Enter the slider with a little pressure through the slit of the central (month) bar. It's only possible over June and July marks. Then move the slider to the desired month and day mark. Each mark represents two days.
5. Deform lightly the meridian ring (the bigger one) in order to insert the hour ring. Be sure that both rings have their dyed faces on the same side when in folded position.
6. Deform again the latitude ring to put the central bar in position. Check the photo for the right orientation.
7. Finally, insert the eyelet through the "jasolo fecit" part of the meridian ring and displace it to the latitude value of your location. To improve the sliding of the eyelet, you can clean the path with a stick before the insertion (again the support material).
You can purchase the individual parts in case you need any replacement:
- Meridian ring: http://www.shapeways.com/model/185486/universal_ring_dial_2__meridian_ring_part_.html
- Hour ring: http://www.shapeways.com/model/185480/universal_ring_dial_2__hour_ring_part_.html
- Central Bar: http://www.shapeways.com/model/185737/universal_ring_dial_2__central_bar_part_.html
- Slider: http://www.shapeways.com/model/165846/universal_ring_dial_2__slider_part_.html
- Eyelet: http://www.shapeways.com/model/185479/universal_ring_dial_2__eyelet_part_.html
This is an improved version of a previous model:
http://www.shapeways.com/model/132928/universal_ring_dial.html
You'll receive five parts unconnected and undyed. Follow these instructions:
1. Clean the parts with cold water and soft brushing to remove support material remaining from the 3d printing.
2. Dip the parts in cold tea for a couple of hours. Holes will get more dyed because of the support material trapped in them. The slider part doesn't have marks, but with the dying will get as yellowish as the other parts.
3. Paint with black ink the marks. Let dry the ink and then remove it with a wet sheet. This way, ink only remains in the marks. In the photo the slider and some zones of the rings weren't inked so they maintained the yellow tone because tea dyes all no flat surfaces. The hour ring has marks on both sides, but only one needs to be dyed.
4. Enter the slider with a little pressure through the slit of the central (month) bar. It's only possible over June and July marks. Then move the slider to the desired month and day mark. Each mark represents two days.
5. Deform lightly the meridian ring (the bigger one) in order to insert the hour ring. Be sure that both rings have their dyed faces on the same side when in folded position.
6. Deform again the latitude ring to put the central bar in position. Check the photo for the right orientation.
7. Finally, insert the eyelet through the "jasolo fecit" part of the meridian ring and displace it to the latitude value of your location. To improve the sliding of the eyelet, you can clean the path with a stick before the insertion (again the support material).
You can purchase the individual parts in case you need any replacement:
- Meridian ring: http://www.shapeways.com/model/185486/universal_ring_dial_2__meridian_ring_part_.html
- Hour ring: http://www.shapeways.com/model/185480/universal_ring_dial_2__hour_ring_part_.html
- Central Bar: http://www.shapeways.com/model/185737/universal_ring_dial_2__central_bar_part_.html
- Slider: http://www.shapeways.com/model/165846/universal_ring_dial_2__slider_part_.html
- Eyelet: http://www.shapeways.com/model/185479/universal_ring_dial_2__eyelet_part_.html
by
nervoussystem
A cellular pendant. The first necklace to be added to our Cell Cycle collection.
Please note that if you purchase from Shapeways it will not come with a chain. If you would like to receive the chain with your purchase please purchase the pendant directly from our website here
by
izign
Impress with less.
This Ring is inspired on a square cut stone. Keep it pure or dress it up to match your daily fashion style by placing a shiny wrinkled candy wrapper or a piece of fabric.
This extravagant ring can give disposables a second and value added life.
Available sizes:
ring06 17: diameter 17mm (USA 6¾)
ring06 18: diameter 18mm (USA 8)
ring06 19: diameter 19mm (USA 9¼)
ring06 20: diameter 20mm (USA 10¼)
ring06 21: diameter 21mm (USA 11½)
ring06 22: diameter 22mm (USA 12¾)
Besides this Ring and the larger RingXL there is also a ‘Cling’ design, a jewel that is hold by a naturally way between two fingers. When interested in reselling please contact iZign for the resellers price list.
This Ring is inspired on a square cut stone. Keep it pure or dress it up to match your daily fashion style by placing a shiny wrinkled candy wrapper or a piece of fabric.
This extravagant ring can give disposables a second and value added life.
Available sizes:
ring06 17: diameter 17mm (USA 6¾)
ring06 18: diameter 18mm (USA 8)
ring06 19: diameter 19mm (USA 9¼)
ring06 20: diameter 20mm (USA 10¼)
ring06 21: diameter 21mm (USA 11½)
ring06 22: diameter 22mm (USA 12¾)
Besides this Ring and the larger RingXL there is also a ‘Cling’ design, a jewel that is hold by a naturally way between two fingers. When interested in reselling please contact iZign for the resellers price list.
by
izign
Impress with less.
Keep the shape pure or fill it up to match your daily fashion style.
This jewel can be easily customized just by placing a shiny wrinkled candy wrapper (not included).
This extravagant CLING has one size and is naturally hold in place between two fingers.
This jewel can give disposables a second and high value added life.
When interested in reselling please contact iZign for the resellers price list.
by
opresco
«MITZURA AWARDS»3D FRENCH CURVES.
(Not to be confounded with BEZIER CURVES :-)
This design is my birthday present for Mitzura who is a very fine artist www.mitzura.com
Happy Birthday Mitzura!
*******************
See more French Curve related designs here:
Twisted French Curve Pendant
Keyring with Twisted French Curve
(Not to be confounded with BEZIER CURVES :-)
This design is my birthday present for Mitzura who is a very fine artist www.mitzura.com
Happy Birthday Mitzura!
*******************
See more French Curve related designs here:
Twisted French Curve Pendant
Keyring with Twisted French Curve
