This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
I would like to introduce to you the sculpture »You & Me« from the »Scrappies« figurine family. It represents love, affection and mutual commitment - emotions that everyone values and never lose their significance.
The »Scrappies« are inspired by everything you can find in a scrapyard: old nuts and bolts, tin cans, pipes, coils, parts of ball bearings.
But they are actually manufactured in a totally different, novel »3D printing« process. Each of them is made in one piece from fine metal powders.
I had initially made the »You & Me« sculpture as a unique gift for our 30th wedding anniversary, but when Christiane placed the Scrappies on her office desk, her collegues loved them so much that we thought why not share it and make it available to others.
Therefore, and for a limited time, I am offering you my work here, outside of the traditional channels of exhibiting and selling art. Each figurine will be customized with your initials of choice. I will make and ship a unique »You & Me« sculpture for every supporter, be it one or many.
Case for the iPhone 5. This case allows a protection of the back and the sides of the case while having free access to the antennas.
Features :
- Complete access to the antennas
- Full access to connectors
- Full protection of the back and the sides in aluminium
- Apple logo visibility
If you need further information, please don't hesitate to contact me.
You can also check out my iPhone 5 Dock:
iPhone 5 Dock
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
Inner diameter 19mm.
If you want to get a polished and fully functional QR code pendant, set the delivery address to my one (I will provide it by a private message). I need to get the product first to finish it and then send to you.
This QR code tag can contain any encoded message that you wish (min. 18, max. 32 characters). If you want to make it a functional url tag, you need to include "http://" part!!!
The QR codes are now used in many spheres of life. They can contain numbers and letters, so you can encode any kind of text information, be it address, phone number, message, name, web link, etc.
Most of the modern mobile phones (and apple iphone was one of the first to feature this technology) can decode the QR codes, making QR-coding a funny, easy and peculiar way to say something.
You can use this tag as a keychain or as a pendant.
Also, check out this colored plastic tag!! It's cheaper, it's bigger and it's colored! :)
This ring has Ø17,5mm on the inside as standard measure. To resize this ring click "Personalize".
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
Anel "Sinto sua falta!". Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Esta peça foi concebida para ser crua e bruta tal qual o sentimento agudo da falta de alguém querido.
Este anel tem Ø17,5mm no interior como medida padrão. Para outras medidas, clique em "Personalize".
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
This bracelet has Ø77mm on the inside or 24cm of it's internal circunference's length as standard measures. To select between others measures click "Personalize".
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Este bracelete tem Ø77mm no interior ou 24 cm de seu comprimento circunferência interna como medidas-padrão. Para selecionar, entre outras medidas, clique em "Personalize".
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
This bracelet has Ø77mm on the inside or 24cm of it's internal circunference's length as standard measures. To select between others measures click "Personalize".
DISCLAIMER:
Make sure you understand all specifications of this piece (such as surface finish, colors, size, etc) before you order one! Any questions? Do you want this piece in others dimensions? Drop me a note!
Your country may charge some importation tax. For more information about that I recomend contact the customs office of your country.
--
"Sinto sua falta!" Bracelete. Esta peça é a expressão do sentimento da ausência de uma pessoa querida e insubstituível. Um amigo, um pai, uma mãe, um namorado ou namorada, até mesmo um animal de estimação amado. É um presente delicado e lúdico de amor.
Este bracelete tem Ø77mm no interior ou 24 cm de seu comprimento circunferência interna como medidas-padrão. Para selecionar, entre outras medidas, clique em "Personalize".
ATENÇÃO:
Certifique-se de que entenda todas as especificações das peças (como acabamento, cores, tamanho, etc) antes de adquirí-la! Tem alguma dúvida? Entre em contato!
AOS COMPRADORES NO BRASIL:
Este produto é importado e sobre todo produto de importação a receita federal pode cobrar taxa de importação das peças. A alíquota pode variar entre (60%-100%) e incide sobre o valor total da compra.
We are a SuperOrganism.
GCD18 Wedding Band
This wedding band is presently a size 7. This band can not be sized up or down without damage to the rings pattern.
If you require a different ring size please contact me for a price to custom make this model your size.
The Following stones can be added:
3 , Round Stones, X=1.60 , Y=1.60 , Z=.98 , .02ct. (total .05ct.)
2 , Round Stones, X=1.50 , Y=1.50 , Z=.92 , .01ct. (total .03ct.)
1 , Round Stones, X=1.40 , Y=1.40 , Z=.86 , .01ct. (total .01ct.)
Total Gems: 6 Total Weight: .08ct.
.Frosted Ultar Detailed:
This model comes in Frosted Ultra Detailed. This is for the person who wants to cast the ring in gold, silver, or platinum at their local jeweller’s. What you would do is the following:
- Order here from ShapeWays this model in Frosted Ultar Detailed.
- Once you receive your order you would take this model to your local jewellers along with the list of stone that can fit into this model.
- Your jeweller will give you a price to complete this model into a ring of metal and stones of your choose.
- Please pass on this IMPORTANT NOTE to your jeweller. The model that comes from ShapeWays needs to be cleaned in his ultrasonic cleaner and than blown dry (do not use as steamer) to completely remove all support matters used in the growing process before sending to casting. If the model is not completely cleaned the casting may not come out correctly.
Price Request:
If you would like a price quote from us to produce this model in materials other than the Frosted Ultra Detailed material listed here from ShapeWays please contact us with details of your request. In your email give us as much detail as possible (ie, 14kt yellow gold, mount only). We will contact you shortly..
** The above photos may show white and/or other stones in the ring. ``NO STONES COME WITH THIS ORDER``. Your order here from ShapeWays gives you the master model for the above ring that your jeweller requires to cast this ring by “Lost Wax Casting”.
OK, this does not sound like fun but keep in mind: the good things and also the bad things, all has an end!
The default US Ring Size is 7.
Use one of the following links to choose a different ring size.
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7 (default)
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
You can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
A 3D rolling ball maze with a bone-like matrix in a clear cube| pirate
pocket puzzle |Reach the treasure to solve the maze
Color and material options are in the "Select Material" drop-down list on
the right. If you want an option not shown or would like a quantity
discount, please click on the "Contact Designer" button to write me an
email.
A pirate chest recently washed ashore containing a never-before-seen hand
carved puzzle. The carvings on the chest indicate that the puzzle is a 3D
maze map through the caves on Dragon Fang’s island where the vast treasure
from the pirate ship Black Lion is hidden. You open the chest only to find
that the main body of the maze looks eaten away to the “Bare Bones.”
Luckily, there is a clear case in the chest as well, and a small brightly
colored ball that will help guide you. The ball fits into the maze at the
round mouth of the cave maze in the corner of the cube. The maze then
slides into the clear case; it is a perfect fit. You shove the sturdy case
with its precious map into your pocket. The question is, can you solve the
mystery of this maze and find the treasure? The carvings on the chest show
that your goal is shown as another round ring with the remains of an “X”
along its border.
To get there, roll the ball along the bones of the maze to try to reach
the treasure. Your ball can travel up, down, fore and aft, port (left) and
starboard (right) to travel through the maze. The clear walls allow you to
easily see exactly where you are in the maze, and which directions can be
tried next, but getting there is harder than it looks. Argggh, there have
been plenty of “Bones” cleverly placed along the tunnels to trip up any
unwary pirates and keep them from reaching the treasure. These can lead
you astray or plunge you into a deep pit.
The “X Marks the Spot” where your treasure is found. If you reach the
treasure you are not done yet matey! You have to return safely back to the
mouth of the cave. Be wary though, there are new perils on the way back,
and many pirates have never found their way back out. The true brave of
heart can enter again to see if they can find the treasure again, this
time, faster!
Good Luck Maties!
This model is a two pack of the Bare Bones mazes, each with it's own maze
ball. The 3D maze fits snuggly inside the 2 inch by 2 inch by 2 inch clear
plastic cube. The clear cube also serves as a display quality case for
this clever pirate work of art. This clear plastic display cube
is sold separately, and is available for around $3. Use the link below
to purchase it with free shipping. Note that this plastic cube
display case is part of this rolling ball 3d maze puzzle and is required
for the proper working of the maze. For this two pack of mazes you will
need to order two cases.
Medium
Size BCW Maze Puzzle Display Case for Bare Bones
Display
Case for Bare Bones for UK Customers
Start by setting one of the “U” shaped halves of the clear case on a table
with the sides of the “U” facing up. Before putting the “Bare Bones” maze
in the case, orient it so the circular mouth of the cave (the one in the
corner) is on the bottom. Place the ball on the bottom of the “U” of the
case, such that when you next slide “Bare Bones” down into the case half,
the circular mouth of the maze goes over the ball. Next carefully slide
the top half of the case on. The photos and video above illustrate how
this is done. You are now ready to start solving this maze puzzle.
Many a pirate has been lost in the cave, but have no fear - you can slide
open the two halves of the case and the ball can easily be shaken out to
start solving the maze game over again.
You can easily color the ball to make it show up even better in the maze.
A quick and simple method is to use highlighter markers, or Sharpie
colored markers. Enamel spray paint for plastic models also works very
well. Spray paint was used to color the ball in the photos.
The clear case is very sturdy, so you can carry this maze puzzle around in
your pocket or your bag. When not being played, this unique new type of
maze can be displayed as a fascinating work of art. Set it on your desk or
shelf, everyone will be curious to know what it is and want to give it a
try.
This new maze design uses thicker rods for the maze. They are also rounded
off so the maze structure looks like a skeletal matrix of linked up bones.
Email me with your questions. Also comments or suggestions for new mazes
you would like to see are always welcome. To send me an email just click
on the “Contact Designer” button at the top of this page.
