pzich
Student, interested in modeling and design, currently working mostly in Autodesk Maya, Inventor and Luxology Modo.
Expertise:
- 3D modeler
- Animator
- Designer
- Product designer
- Artist
- Maker
by
pzich
A series of overlapping rings rotated 15º on the x axis, then rotated at 30º intervals on the y axis.
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed apart, a similar ...
by
pzich
Two single-piece inseparable and interlocking pieces. Example of something easy to do with 3d printing but hard just about any other way.
by
pzich
This model was made by placing elongated cubes next to each other and bending them in unique ways.
by
pzich
Thin and minimal desktop stand for the Pebble watch.
Will be made available for purchase after the test version arrives.
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed together in place...
by
pzich
This is a smaller (cheaper) model to test the flexibility of White Strong & Flexible at 0.1, 0.2, and 0.3 cm.
by
pzich
Two of these models can be locked together by twisting them 180 degrees while moving them toward each other
by
pzich
Ring (6.2 cm around) with the letter Z cut into it. Hopefully it'll be printed in metal.
by
pzich
One of four parts for an engine (you need two of these).http://www.shapeways.com/model/167344/http://www.shapeways.com/model/167727/This model is s...
by
pzich
One of four parts for an engine.http://www.shapeways.com/model/167706/http://www.shapeways.com/model/167727/This model is still untested. I followe...
by
pzich
This is a model to test the flexibility of White Strong & Flexible at 0.1, 0.2, and 0.3 cm.
by
pzich
One of four parts for an engine.http://www.shapeways.com/model/167344/http://www.shapeways.com/model/167706/This model is still untested. I followe...
