pzich
Student, interested in modeling and design, currently working mostly in Autodesk Maya, Inventor and Luxology Modo.
Expertise:
- 3D modeler
- Animator
- Designer
- Product designer
- Artist
- Maker
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed apart, a similar model will be printed with the hinge parts already in place. - Mini Version
by
pzich
Pin and Holes is a test of minimum detail and hinge/axel rotation. There is a hollow pin with a radius of 5mm and three holes with radii 5mm, 5.05mm, and 5.1mm. Holes are arranged smallest to largest and are marked with "-" and "+" signs.
by
pzich
A rough soda bottle (sorta like a coca cola bottle) I made as a test, unfortunately I don't think the support material can be removed if this is done in Transparent Detail
by
pzich
This is a wireframe model of a dodecahedron with connections larger than 1cm, Dodecahedron Wireframe Thin is thinner and cheaper.
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed together in place, a similar model will be printed with the hinge parts separated. - Mini Version
by
pzich
Frame and wheel/axels for a car. Hoping the space is great enough that the frame won't be fused to the axels (we'll see).
by
pzich
A series of overlapping rings rotated 15º on the x axis, then rotated at 30º intervals on the y axis.
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed apart, a similar model will be printed with the hinge parts already in place.
by
pzich
Two single-piece inseparable and interlocking pieces. Example of something easy to do with 3d printing but hard just about any other way.
by
pzich
This model was made by placing elongated cubes next to each other and bending them in unique ways.
by
pzich
Thin and minimal desktop stand for the Pebble watch.
Will be made available for purchase after the test version arrives.
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed together in place, a similar model will be printed with the hinge parts separated.
by
pzich
This is a smaller (cheaper) model to test the flexibility of White Strong & Flexible at 0.1, 0.2, and 0.3 cm.
by
pzich
Two of these models can be locked together by twisting them 180 degrees while moving them toward each other
by
pzich
Ring (6.2 cm around) with the letter Z cut into it. Hopefully it'll be printed in metal.
by
pzich
One of four parts for an engine (you need two of these).
http://www.shapeways.com/model/167344/
http://www.shapeways.com/model/167727/
This model is still untested. I followed the guide for minimum wall thickness and minimum spacing (mostly) but have yet to get it printed. If you'd like to be the first please let me know how it turns out.
http://www.shapeways.com/model/167344/
http://www.shapeways.com/model/167727/
This model is still untested. I followed the guide for minimum wall thickness and minimum spacing (mostly) but have yet to get it printed. If you'd like to be the first please let me know how it turns out.
