by
Oskar_van_Deventer
Over The Top is a world-record 17x17x17 Rubik's Cube. It makes quite pretty patterns. It can take many, many hours to solve. The puzzle was first presented live to the world at at the New York Puzzle Party Symposium, Saturday Feb. 12th. The YouTube video was be published after that event, and the record was accepted by Guinness World Records.
+ 
+ + + + + + + + + + + + + + + + + + + + + + + + +
The complete Over The Top 17x17x17 puzzle requires
-1x Set 1
-26 x Set 2
(Actually, you need only 24x Set 2, but it is strongly advised to order some spare parts.)
Watch the YouTube video.
Take a look inside the puzzle.
Read at the Shapeways Forum.
Read more at the Twisty Puzzles Forum.
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
Buy this puzzle as a set by clicking below
+ + + + + + + + + + + + + + + + + + + + + + + + + + The complete Over The Top 17x17x17 puzzle requires
-1x Set 1
-26 x Set 2
(Actually, you need only 24x Set 2, but it is strongly advised to order some spare parts.)
Watch the YouTube video.
Take a look inside the puzzle.
Read at the Shapeways Forum.
Read more at the Twisty Puzzles Forum.
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
by
TomZ
This is the Multidodecahedron. A puzzle that has all the parts from the Megaminx, Pyraminx Crystal, Starminx, Master Pentultimate and Pentultimate and requires you to solve them simultaneously. This puzzle was initially suggested by Carl Hoff, who coined the name Multidodecahedron.
About ordering
To purchase a Multidodecahedron DIY kit, you should purchase this model and then must send me an email with your order number so I can give the necessary instructions to Shapeways. This kit comes with free stickers so please also include your mailing address so I can send them to you (note: I am currently not offering super stickers).This puzzle comes as a kit which you will need to assemble yourself. You will need to provide M3 screws and optional springs and or washers. You can also contact me directly to purchase a fully assembled and stickered copy of this puzzle.
by
pirsquared
The Radio Cube 3 is a cubic transformation of Jason Smith's Radiolarian 3. It has icosahedral cut geometry, and it is slightly shallower-cut than my DeFTI (aka "Eitan's Star" soon to be released by MF8). To build this puzzle, you will need 20 flat-head M3 screws that are at least 12mm long (or the standard equivalent). You can buy stickers at Oliver's sticker shop: http://speedcubing.hu/webshop/index.php?main_page=product_info&cPath=6_41&products_id=386
by
PuzzleMaestro
This is a collaborative effort with Gregoire Pfennig to bring to life the ultimate shapeshifting cuboid! You will find this to be among the most difficult of the cuboids to solve. As a 3x5x7, it is odd on all planes, which means that it can move and shapeshift on all sides too! A must have for any collection, and truely a unique challenge.
You will need 6 Cube4You screws to assemble, and that's all!
Available here:
http://cube4you.com/index.php?main_page=product_info&cPath=27_30&products_id=132
Stickers can be obtained from Oliver Nagy, by request here:
http://speedcubing.hu/webshop/
See the topic at:
http://www.twistypuzzles.com/forum/viewtopic.php?f=15&p=281132#p281132
Fully assembled and stickered puzzles can be made for you, for a limited time, by request. Please contact me to obtain that, with a price of $280 for white, and $330 for black.
Happy solving!
The first to solve the puzzle and upload the solve to video will earn 20% off my next shapeways puzzle, then second one will earn 10% off, and the 3rd one will earn 5% off. The next puzzle will be another one not to be missed! But you must solve it before I upload the solution on youtube, once I figure out how to solve the thing!!
Contact me for more information.
by
Oskar_van_Deventer
Mixup 5x5x5 is a twisty puzzle where many more pieces can swap place than one would expect. The puzzle has 262 pieces, of which 66 inter-swappable "squares" and 72 inter-swappable "spacers" between them. Each "square" can be in any of its four orientations. The name of this puzzle is ambiguous, as there are 9 pieces in a row at the edges. Still, the base puzzle is a 5x5x5. For the specialists: this puzzle jumbles and it is fudged.
Watch the YouTube video.
Read at the Shapeways Forum.
Read more at the Twisty Puzzles Forum.
Buy this puzzle as follows.
1x Set 1.
3x Set 2.
(If you just click the Shapeways "add-to-cart" button for this model, you would be ordering a big cube)
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
Watch the YouTube video.
Read at the Shapeways Forum.
Read more at the Twisty Puzzles Forum.
Buy this puzzle as follows.
1x Set 1.
3x Set 2.
(If you just click the Shapeways "add-to-cart" button for this model, you would be ordering a big cube)
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
by
Pitcher
Fracture-6 is a "bandaged" puzzle with three axes of rotation, based on the geometry of the triangular dipyramid. The three axes are located at each four-sided vertex. Every axis is capable of turning in 90 degree increments, but only when all four edges around that axis are pointing in the same direction. If the edges are not properly aligned the axis will be limited to 180 degree turns. This bandaging makes Fracture-6 very difficult to solve.
Fracture-6 comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Fracture-6 also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The ones I used came from this shop. You'll need three screws and three springs.
Have fun!
Fracture-6 comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Fracture-6 also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The ones I used came from this shop. You'll need three screws and three springs.
Have fun!
by
Pitcher
The Pentamid puzzle is based on the geometry of the pentagonal dipyramid. It turns on the five edges around the equator of the puzzle, as well as on the two polar vertices. Each vertex can turn in increments of 72 degrees, while the edges are limited to 180 degree turns. The Pentamid puzzle becomes scrambled fairly quickly with just a few turns.
The Pentamid puzzle comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Pentamid also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The springs I used came from this shop. You'll need seven of the springs, combined with seven 12mm M3 screws, which you'll need to purchase separately.
Have fun!
The Pentamid puzzle comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Pentamid also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The springs I used came from this shop. You'll need seven of the springs, combined with seven 12mm M3 screws, which you'll need to purchase separately.
Have fun!
by
clauswe
You need only six M3 screws 10mm or longer. It is not difficult to assemble.
5x5x9 sticker set in Olivèr Nagy's Shop
Further information at Twisty Puzzles Forum
See the Video on YouTube
5x5x9 sticker set in Olivèr Nagy's Shop
Further information at Twisty Puzzles Forum
See the Video on YouTube
by
EricVergo
Due to the high number of parts, the model for this product exceeds the limit set by shapeways, and the ordering for this puzzle can only be done through the backdoor method. This involves using the co-creator function to notify me that an order has been made.
When you purchase the puzzle, you have the option of buying a do it yourself kit, or an assembled puzzle. The diy kit only includes the parts for the puzzle, it does not include stickers, or screws. If you purchase an assembled puzzle, the puzzle will be shipped to you assembled, stickered, broken in, lubed, and ready to play. Either option you choose, I recommend getting a black puzzle, because over time, the white material will absorb very small amounts of dust/dirt and will become discolored.
To order An assembled/finished puzzle, please send me an email at gingervergo at gmail dot com. The DIY kits are shipped to you directly by Shapeways (you will make payment to Shapeways). The assembled puzzles are shipped to you by me (you will make payment to me).
PRICES
DIY: $199
Assembled (either color): $275
(these prices do not include any taxes/import fees that you may have to pay)
by
PuzzleForge
This is the third in my series of face-turning icosahedra, the Radiolarians. The series is named after a small ameboid protozoa that can produce a skeleton in this shape.
The first straight cut face turning icosahedron in the world was my "Radiolarian 2", which has slightly shallower cuts. This puzzle, the "Radiolarian 3", was the follow up with deeper cuts which add a part in the center of each face.
You will receive a DIY kit of raw 3d printed parts. You will need to provide your own 4-40 size screws, washers and springs to assemble your puzzle. I prefer this puzzle without springs. Stickers can be obtained by emailing stickers@puzzleforge.com for 8 dollars plus shipping.
The first straight cut face turning icosahedron in the world was my "Radiolarian 2", which has slightly shallower cuts. This puzzle, the "Radiolarian 3", was the follow up with deeper cuts which add a part in the center of each face.
You will receive a DIY kit of raw 3d printed parts. You will need to provide your own 4-40 size screws, washers and springs to assemble your puzzle. I prefer this puzzle without springs. Stickers can be obtained by emailing stickers@puzzleforge.com for 8 dollars plus shipping.
