IMPORTANT ! This model is for sale and made up of seperate parts. to purchase all the parts to complete the kit click the get a set link below. This is only for an example of the assembled model.

Here is my highly detailed 1/1 scale model of the Arc Reactor from the first film. This is the one that eventually ended up in the display gifted to Tony by Pepper.

Hours of meticulous work has gone into modelling each element as accurate to the film as I can from reference. I recommend ordering in Black too as a customer sent me his image and it looks amazing raw in black :)

The model comes in 6 parts.

Transformers, Proton Shield, Capacitors, Central Ring, light ring and dispersal coil

The assembled kit measures roughly 80mm in diameter. Some basic assembly and painting required and copper wire is not included but is easily obtained from electrical and hardware stores.

UPDATE after the feedback I recieved on the Arc Pendant I decided to resize it for this model. This is the screen accurate size as all other replicas add an inch to the diameter for display purposes. Same great model with improvements on the geometry :D

---

Want to get a set?

+ + + +

---

My Model of the M41A Pulse rifle from Aliens. Modelled in 3DS Max and accurate to the movie version. A lot went into getting this right including getting the measurements from a 1/1 scale replica and modelling each part to scale. The build took over a month, hence the price ;) *Important* The model contains small moving parts that are not recommended for younger children. If you require other scales for any of my weapons* contact me and ask. Thanks for the support *IMPORTANT* I or Shapeways will not print these scaled weapon replicas at 1/1 scale. They are for display purpose only. This has recently been updated as Shapeways would not allow me to print the original size.

A 1/1 scale model of the Belt Buckle featured in the game. Available in 3 materials. The prop may vary from the illustration depending on material chosen for fabrication.

Here is the Han Solo iPhone 4 cover. As you can see the figure iself is actually 3d and actually resembles the Iconic moment in the movie. Various colours available. If you require the iPhone 5 version it's here :)

Hi guys I now offer you the Multi Pass from one of the best Sci Fi films around. It comes in raw WSF only. I have also seperated it into parts for you to customise add LED lights etc. The decals are downloadable please drop me a message if you require them. Thanks for your interest in my work Paul :)

The badge of the Raccoon Police's special Team S.T.A.R.S. This Replica is 1/1 scale to the original and highly detailed. Available in all metals listed.

*IMPORTANT* This model is quite large and made up of 8 parts. To complete kit click the "Want to get a set" link below, this will automatically add all pieces to the cart so no need to click add for this part.

The U.S.S. Sulaco as featured in Aliens. This model took me over a month to complete and I used reference photos from the screen used model. I'm no stranger to the film and have been a fan for over 20 years .
If you have any questions or want to review my instruction sheet before purchasing, please comment or message me? Thanks for the support guys :)

---

Want to get a set?

+ + + + + +

---

The most famous keys in Survival Horror gaming history. Included in the set are the Helmet Key, Shield Key, Sword Key and Armour Key. All modelled from spec in 3DS Max. :) *IMPORTANT* Product will vary from the illustration as only one colour or material is used.

MIB, DELIVER THE GALAXY OR EARTH WILL BE DESTROYED! Well here it is in 1/1 scale. Wear this as a pendant or if you have a cat called Orion put it on their collar. Unlike other versions available on the net I am providing a fully mapped galaxy to put in your pendant. More on this very soon XD
Men in Black and the MIB logo are copyright of Amblin Entertainment and Columbia Tristar. This product is a fan made replica.

A 1/1 Scale replica kit of the T Virus complete with helix. As this comes as a kit I have only included the tube as reference you will have to provide a glass or plastic tube of your own. I am working to resolve this soon :)

The Key to the STARS Room. This model is currently only available in Stainless steel which means it's a blank (no texture) It will soon be available in full colour sandstone :)

My model of the Armoured Personel Carrier from Aliens. This is 1/72 scale and will fit in the Aoshima Dropship. The rear turret is functional and slides on the rail, the door opens and the wheels are seperate so can be made to turn if needed. No detail missed on this one and it was a joy to make Additional Info: The original was made out of a british airways tug and was used for the exterior shots in the blockbuster Cameron movie.

The item you are viewing is a full scale replica key from the film The Fifth Element.The Dimensions are approximately 33mm long by 50mm high at the keys head. If you like you can trim the keys shaft to 14cm which is the scale used in the film I made it longer for printing purposes. As a fan of the film I got this as accurate as I could without going below the min 0.8 mm depth. I recommend ordering this in gold or brass from the options to the right. Enjoy :)

The logo of S.H.I.E.L.D. in full colour. These are 1/1 scale to the badges worn by Black Widow in the film.

As featured on the Official Stan Winston Studios Facebook here. The pendant is roughly 6 cm in height and width and can be worn either way round, as illustrated. Although Aliens inspired this resembles the one from the original movie too. This was based on my pet facehugger Hugsy who often comes to conventions and even has his own facebook. Enjoy :)

The medal found in the first Doom Book in the Underground Caves. Both were inserted in the fountain to access the Secret Umbrella Laborotories.

The keys used by Both Leon and Claire in the Raccoon City Precint. All modelled in 3DS max to spec of the originals. :)

The Iconic logo of the Raccoon Police's special unit S.T.A.R.S. This model is available in full colour. If you require any other material or size please contact me. Thanks :)

A set of 2 claws for cosplay. These are 9.5 inches in length, if you require any other sizes or Wolverine claws contact me and ask. *IMPORTANT* I have rounded off these blades with a 2mm chamfer to insure no harm comes to the cosplayer or members of public at conventions, events etc. I hold no responsiblility for these being misused so please act responsibly*

Here is my model of the M65 Smartgun used in Aliens. Built using scaled schematics and reference photos and Just in time for the release of Colonial Marines. Great for fans of the movie, games or just to display. If you require other scales for any of my weapons* contact me and ask. Thanks for the support *IMPORTANT* I or Shapeways will not print these scaled weapons at 1/1 scale, they do not fire any projectiles. They are for display purpose only and are fan made replicas.

Here is the Han Solo iPhone 5 cover. As you can see the figure iself is actually 3d and actually resembles the Iconic moment in the movie. Various colours available. If you require the iPhone 4 version it's here :)

Badge in 6 parts. Enjoy :)

*IMPORTANT INFO* This model is made up of 5 parts you will need to assemble and paint it to get a similar look to the film. Painting suggestion coming soon. This is 1/1 scale to the hero prop used in the film and measures 10.5" in length and 8.5" in height. The model was created using actual photographs of the screen used prop and was traced in Illustrator to match every detail. Thanks for looking :)

As featured on the official Stan Winston Studios Facebook here. The pendant is roughly 10 cm in height and 2 cm in diameter and incorporates the broken pieces featured in the movie at the base. Judgement Day is coming get yours before it's too late :O *IMPORTANT* This is a static piece the fingers do not bend as it is intended for display jewelry only!*

The front section of the Arc reactor featured in both Iron Man 2 and Avengers Assemble. I made this to go under a T shirt and to be backlit by an EL disc. You can get the EL discs pretty cheap on Ebay here. The stencil creates an effect like the one in the photo featured.

Just in time for JP3d get your Raptor Claw pendant and wear it proudly. Less of the raptor impressions though...unless you upload your images and videos for me to see :3 The pendant is roughly 6cm in length and has a rounded tip so you don't hurt yourselves. Enjoy :)

1 of 4 Arrow heads used by Clint Barton AKA Hawkeye. Others soon :)