This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to sizes at this page.
Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?
My third attempt to 3d print a rpg miniature. I've tried to have fun with the position and the balance of the model. Same as with my other models, i expect some serious detail loss, that's why I've put emphasis on the silhouette of each figure, to make them very distinguishable, even at this scale.
This is an iphone 4/4s case Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. **
This Design has been printed and tested.. You can now safely purchase it.
I have several variations of this case that fit the iphone 5 and soon the Glaxy S3. I also have variations with kickstand and earbud organizers. Check out my store and have other features like kickstand. So if you like to see other models visit shapeways.com/shops/amznfx
** metal piece for the bottle opener has been created but needs to be purchased SEPARATELY. it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Thanks for your order and commitment to nerd culture! Two Part Ring based on Portal 2 GLaDOS.
NOTE: This is just the black "eye" and "hat" parts of the ring. You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.
The two part version comes 90% colored. (You still need to paint the yellow and red eye dots on the black part) The two parts just snap together. If you want to can lock the parts together with some super glue.
Inspired by Maori and Pacific Island bone carvings this is the second in a series of Torus based necklaces that feature a tesselating pattern that wraps the geometric form in three dimensions. At first glance the shapes may appear to be simply cut into the skin of the object but when held in your hand and rotated the repeating pattern begins to reveal itself.
The image shows the pendant printed in Stainless Steel but it is available in a variety of material choices including plastic, sterling silver and gold. The pendant does not ship with a necklace but when combined with a simple leather cord as shown in the images it makes a very unique conversation starting peice of jewelry.
This is a 3 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry . Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.
a fully articulated mini figure that can twist torso and bend knees. Made to be compatible with most brick brands. Please be gentle when connecting parts together especially the knees. If you order it with a coloured material, you may have to remove some of the polyamide powder that will be stuck inside the knees' joints (you can remove it using a toothpick).
NOTE: This is just the white "face" part of the ring.
You must also order ”GLaDOS Ring (Black "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Low polygon Cloud Strife from Final Fantasy 7. I modeled him identical to the original low poly you see in the FF7 videogame (not the cutscenes version or fights version, but the playable, big headed one you actually control).
#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.
The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.
a small ball and socket character to play with and customize. Can be used with most famous bricks. Please be gentle when assembling the parts. Any comments are welcome :)
The Inside Out Cube is the first miniature cube puzzle from microcubology.
This is a real working interlocking cube puzzle that requires both skill and dexterity to solve. This version of the Inside Out Cube is 1.5 cm in size. Why is called the Inside Out Cube? Because the whole puzzle can be rebuilt inside out leaving a 3x3x3 hollow on the inside and all the interlocking legs on the outside.
In its life this puzzle has had three different names. As well as the 'Inside Out cube', which probably describes it best, it has been known as Triple Mirror, because three of the pieces are mirror images of the other three. And before that I used to call it the Tiresias cube. I'll leave you to figure that one out for yourselves!
A dog, man's best friend.
It was a long way from the wild wolf to the pampered pet dog of these days.
Remember, even your tiny terrier is a descendant of this wild and free beasts ... show some respect and treat them as friends, too!
In the sprit of this, the whistle is annoyingly loud to both: dogs and humans. So, this is no "silent" dog whistle.
The whistle was inspired by the antique whistles made in england in the late 1800s. If you want to know more about great whistlemakers like J. Hudson or T. Yates, check out one of this sites:
whistleshop.co.uk whistlemuseum.com
This iphone 5 case Contains the Following:
Tank Iphone 5 Case (stronger case that protects most of the phone)
Card Holder 2 Credit Cards and 1 ID (wallet)
Money Clip
Build in Kick stand
It does not contain:
Bottle Opener nor metal bottle opener Attachment
Earphone Organizer
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES an iphone stand.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ The difference between this case and other cases is that this one has even more portection on the sides.. that's why i call it the tank **prices depend on the materials..
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
*** I made a quick video that shows how to put on and take off my cases. Also i have gotten some complains that depending on the printer, material or color material the kickstand comes stuck and it doesnt seem to work. So i made a quick video that shows how to loosen the support material on the hinges or sides using an exacto knife or safety pin so please watch this instructional video
http://youtu.be/gfImxHyhfi0
She's colourful, she's fast, and she'll always be loyal; sat on your shelf. Model has been adjusted to have the tail connected to a back leg. This makes it more sturdy to print.
“But it is one thing to read about dragons and another to meet them.”
― Ursula K. Le Guin, A Wizard of Earthsea
Meet Kynar. Small enough to nestle snugly in your palm, fierce enough to leave indelible marks in unwary fingers, inquisitive enough to ride on your shoulder for hours, absorbing the essence of the world around him.
Treat him well, feed him carefully, and mind the scales in shedding season.
This die is inspired by the repulsion force polyhedra. Nonetheless, the underlying polyhedron (not rounded) is very different from the shape that can be obtained through this technique with 11 points repulsing each others.
Actually, I calculated the positions of 11 points to have a maximal radius for the circles resulting from the intersection of this underlying polyhedron with a sphere with the following constraints: - 2 poles (upper and lower face - parallel to the horizontal plane) - 3 points around each pole - 3 remaining points corresponding to 3 faces perpendicular to the horizontal plane
The result is a truncated sphere with 11 circular faces of same radius.
It is numbered from 1 to 11: 2 numbers are on faces (poles), 6 between vertices and face and 3 on edges. The sum of the numbers on the 3 upper vertices surronding the North pole is 18. Same thing for the sum of the 3 numbers on the lower vertices surronding the South pole and the sum of the 3 numbers on the edges of the equator.
This die is made of a shell of 1.5mm that contains support material to make it heavier. The engraved numbers have a 0.75 mm depth. They are quite big since they overlap the surrounding faces and thus should be very easy to read.
Lock your liquour closet with this! You can open the lock and get inside only by solving the maze. This one is with fasteners and 3mm screw holes. I actually carved one from wood when I was boy scout. I was told that long time ago, these was used as a shed locks.