A pair of dangly Triple Matrix earrings.

A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.

When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!

More earrings

While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.

A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging

Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available

More
Other sizes and shapes available.

Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Give it a good spin and it moves in erratic and wild ways.

This is the 7.5cm / 3" version, see the Gyro the Forms section for other shapes and sizes.

Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !

Corner stand for this 7.5cm model here.

Notes
Be careful with a cube this size, fingers may get pinched if handled carelesly.
It is not a toy for children!
Also please be careful with (the assembly of) the Alumide version as this material is less flexible/robust than the Strong & Flexible materials.

More
Virtox Shop

The design I'm trying to make is exactly twice as complex as this one. This stage of it seemed like a good place to pause for a breather.

Model of a tricycle. This will print as 1 piece, with turnable steering, pedals, and wheels. Riding this trike is strongly discouraged. :p

Note: this best prints in White Strong and Flexible. The steering may be stuck when you first receive it. Simply rotate the steering column back and forth very gently until the powder escapes and the steering becomes loose.

This design commemorates The Grand Opening of The New Roosevelt Tram linking
the beautiful Roosevelt Island to Manhattan; and, my 70th Anniversary; I had my ears
pierced – to wear my 3d Printed Genuine Sterling Silver Earrings – for this occasion :-)
See "Le tramway de Roosevelt Island reprend du service."

See my other Roosevelt Island Tram designs here:
Slice of Big Apple with Roosevelt Island Tram
The New Roosevelt Island Tram Cuff-Links
The New Roosevelt Island Tram / Pendant / Keyring
Pendant / Keyring with Roosevelt Island Tram
Keyring with Roosevelt Island Tram
Soccer Ball with Roosevelt Island Tram inside
Big Apple with Roosevelt Island Tram inside
Ring with Roosevelt Island Tram
Roosevelt Island Möbius Bracelet with Roosevelt Island Tram
Geocube with Roosevelt Island Tram inside

I've made a few changes to make the cooker easier to use. I've updated the handle and made the bottom flat so anyone could eat from it. I've added an extrusion near on the handle to stabilize the cooker in the base. Version 1 was very nice looking, and version 2 will keep most of the original design while adding stability.

It will be fun to collect every color of ceramic shapeways makes. So far I have white ceramic, avocado green, and glossy black with the other colors on their way. If you are looking to get just the cooker, here's the link.

If you want to customize this in any way please email me on shapeways or contact me via my facebook page: https://www.facebook.com/ZeroDistanceDesigns

This little cooker is designed around the lowly tealight. First meals have been with a standard tealight (38mm x 38mm x 16mm) as the heat source and safflower oil inside the cooking vessel with minced green tomatoes, Portuguese sausage, and sliced garlic. After those tasty results, I progressed to make a variety of dishes.

Tiny Dishes + other savory treats:
- roasted garlic
- cheese frying: ale cheddar, mozzerella
- melted milk chocolate
- fried bread dough
- baked a small spice cake ball
- melted marshmellow + milk chocolate for different smores variations.

other neat applications:
- Heats soy wax to 200 (need to blow out the candle at 185F) and made soy candles.

temperatures:
- heats water: 200F
- heats safflower oil: 300F

limitations:
- uneven heating causes glaze cracks. The latest design with a flattened bottom seems to prevent cracks, but the base can still get glaze cracks.

other oil tests:
- coconut oil, grapeseed oil, butter were all tested and work well.
- walnut oil was tested and I don't recommend it as the oil spattered a few feet in the air as it heated up.

This is my 1/20th scale model of my 2012 Fusionweld Chopper design. The wheelbase of this bike model is 85mm.

Came out wonderfully in stainless. Hopefully it will still be printable in stainless. For fans of the Die, you can now have a poster of it, a card of it, even a framed print! http://www.redbubble.com/mybubble/art/6653994-2-stainless-and-gold-plated-steampunk-dice/edit
I see this has been selling well lately! Please let me know what you think of the dice, and let me know how you found them! Also if you read this you can get the link to 2 packs for a little bit of a discount. Small dice 2 pack http://shpws.me/lUWS Large dice 2 pack http://shpws.me/lUWU and variety pack http://shpws.me/lUWT

A buckle for all named Michael, Melissa, Malcom, Monique, Manfred, Margaret, Marcy ...
The good thing, it works for Wiliam, Wendy, Walter ... too.
If you are a fan of the letter "M", this one is your thing!

It comes without belt and metal strap!
I used an old bicycle-spoke for the strap. This works pretty well but keep in mind, that you have to do this on your own.

If there is a need for a fixed strap that is part of the buckle, please let me know.

It's a small coffee cup whose handle is a moebius strip.
It is only attached on one side (where it is horizontal): I guess such a shape should be difficult to do without 3D-printing.
Oddly enough, it is quite ergonomic: put your thumb on the vertical part of the moebius strip, put the opposite horizontal part between your index and your medium, et voilà!

Inspired from the classic Möbius Strip, this design has a small "snake" that travels the path along the outside, then inside, and back again, helping illustrate the concept. The inside diameter is about 2.7 inches. Go view a video I made of the test section I just received in Stainless Steel. http://www.youtube.com/watch?v=vIEXeOSeG-8 There is a modification I need to make before it will work in steel, but the other materials should print just fine. the way the steel is finished ended up sort of welding the snake to the bracelet! :)

Please note, there is a larger version in my shop now too. The large is about 3.0 in inside diameter.

It works! The little "meat ball" moves around inside this, and makes a bit of a jingle sound when you play with the piece.

This is the first in my "Spaghetti With Meat Ball" series. The "meat ball" rolls around inside the pendant making it rather fun to play with while wearing it.

It is about 1.5 inches wide.

To make it more consistent in manufacturing, the metal ball (meat ball) will need to be installed. All you do to install the ball, is push the spaghetti a bit, and pop the ball in the gap. You can also put in any 6 or 7mm ball.

A ball bearing, bead, etc.  can go into it.  In fact, you can put in a bunch of them if you like.  It looks really cool with 13 ball bearings.  That's the most you can fit into it.

I call this pendant simply - '69'

Partially inspired by my previous pendant Twin Rail Mobius, '69' is a set of four rails arranged in a figure 8 to make a train of balls travel in seemingly never ending 6 and 9 shapes.

Note: shell only is 3D printed, add your own 6mm or 1/4in balls!
If the balls stick, use just one ball to find the sticky spot and adjust the rails physically either with pliers or a screwdriver - doing so is at your own risk, so please blame no-one but yourself if injury is caused.

Member of the Evolutionary family.
A twin-shell model with two female sides.
Free shipping worldwide !
http://www.shapeways.com/shops/virtox&section=Evolutionary

The die's faces are supported by springs meeting in its center.
Printed and tested OK
Copyright ©2011 Ovidiu Opresco
Based upon the geometry of the Rhombic Triacontahedron

This version of the Acoustabowl was specifically designed for Ceramic, but is available in all printable materials. The Acoustabowl is designed to hold any current phone, even the very large Samsung Note. It has been tested with the Samsung SII Skyrocket, Samsung SIII (speaker is towards the top of phone, so phone must be upsidedown), and the Apple iPhone 3GS. Put your phone in, play a song or video, and enjoy the enhanced acoustics of the Acoustabowl.

The die's faces are supported by springs meeting in its center.
Printed and tested OK.
Copyright ©2011 Ovidiu Opresco

The eighth in a series of Celtic Knot patterns that would make great pendants for your own custom jewelry.

...a breath of wind touches the sea, creating a wave. Among the myriad forms it takes, we have frozen one of this and made a vase: wave vase.

...un soffio di vento tocca il mare creando un onda. Tra le miriadi di forme che assume ne abbiamo congelata una, creando un vaso.

Colours: Eggshell Blue - Avocado Green - Pastel Yellow - Satin Black - Gloss Black - white.

KioròdesiGn - 3D printed designs
Facebook
Twitter
Tumblr

The second in a series of Celtic Knot patterns that you could use to make your own custom jewelry.

Poly 3 , Polyamory is a combination of similar forms, connecting as one big sculpture on a ring. Ring sizes are based on the inner diameter of the ring (S:17mm M:18mm L:19mm) . Custom size? Just contact StudioSinth and we create your design.