This is a 3 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry . Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This Water Still is designed for 28mm gaming. In a post apocalyptic future there is little more important that potable water. This makes a gangs water still a high priority target for rival gangs. suggestions and critiques are welcome and appreciated. The Pipes are slightly thicker than in my painted print. Shapeways made me thicken them up after I had printed it.

This is a 3 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry a shotgun, revolver rifle and automatic pistols (thank you to Nooker for the weapon requests). Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This Scavenger Mod pack is a collection of Arms, Tentacles, heads, wings and weapons used to modify standard 28mm figures into putrid mutated post apocalyptic scavengers. The pack contains 1 head with bony protrusions, 2 heads with eyes on stalks, 2 necks with two heads, 1 Claw, 1 Chitin Claw, 1 double arm with Laser pistol and claw, 2 sets of wings, 3 different blunderbuses, and 2 tentacles. They are attached at the base by a single sprue which must be carefully trimmed away by a sharp razorblade. suggestions and critiques are welcome and appreciated

This is 2 pack of Robot Law Enforcement Dogs. The dogs are in different positions but are otherwise identical. They have a control panel on their left shoulder blades to allow programming. They are 15.5 mm in height (about waist high on a 30mm figure). They are attached at the feet by sprues which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm

This is a 3 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry Laser rifles or pistols . Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This model includes the weapons and figures pictured above. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This model includes the weapons and figures pictured above. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This is an industrial walkway with railings that fold down. Any gamers that live in an apartment know it's hard to keep any amount of terrain around without it getting crushed or pissing off your room mates. With the railings folded down it is 1cm high. This piece of terrain is designed for use with any 28mm game you see fit. When you receive your walkway, the railings may not be centered as they are in the video and pictures. EASY FIX! Just fold your railings all the way out and you will be able to gently guide them through the supports to their centered position. One of the images shows a miniature for scale but it is not included with this model.

Automatic weapons pack includes 3 rifles, 3 pistols and two spare hands . The hands vary between left and right (favoring the right) for more variety on both the weapons and spares. They are attached at the base by a single sprue which must be carefully trimmed away by a sharp razorblade. These weapons are intended to be used with 28mm scale miniatures. I'm uncertain about how these will print with white detail, so print in that material at your own risk! suggestions and critiques are welcome and appreciated

Revolver weapons pack includes 2 long barreled revolvers, 3 pistols and two spare hands . The hands vary between left and right (favoring the right) for more variety on both the weapons and spares. They are attached at the base by a single sprue which must be carefully trimmed away by a sharp razorblade. These weapons are intended to be used with 28mm scale miniatures. I'm uncertain about how these will print with white detail, so print in that material at your own risk! suggestions and critiques are welcome and appreciated

This is a 4 pack of female Mining gang members. They carry revolvers. Their height is actually 31mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

Shotgun weapons pack includes 5 shotguns and three hands . The hands vary between left and right (favoring the right) on both the weapons and spares for more variety. They are attached at the base by a single sprue which must be carefully trimmed away by a sharp razorblade. These weapons are intended to be used with 28mm scale miniatures. I'm uncertain about how these will print with white detail, so print in that material at your own risk! suggestions and critiques are welcome and appreciated

This is a 3 pack of Religious Zealot Gang members. They bear the robes and masks of their gang save for Eli on the left. Eli is blind but possesses another form of site. They carry Automatic Pistols, an Automatic rifle with drum and a chainsaw sword . Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. suggestions and critiques are welcome and appreciated

Laser weapons pack includes 3 Laser Rifles, 3 pistols and two spare hands . The hands vary between left and right (favoring the right) for more variety on both the weapons and spares. They are attached at the base by a single sprue which must be carefully trimmed away by a sharp razorblade. These weapons are intended to be used with 28mm scale miniatures. I'm uncertain about how these will print with white detail, so print in that material at your own risk! suggestions and critiques are welcome and appreciated

Automatic weapons pack includes 3 Rifles with drums, 3 automatic pistols and two spare hands . The hands vary between left and right (favoring the right) for more variety on both the weapons and spares. They are attached at the base by a single sprue which must be carefully trimmed away by a sharp razorblade. These weapons are intended to be used with 28mm scale miniatures. I'm uncertain about how these will print with white detail, so print in that material at your own risk! suggestions and critiques are welcome and appreciated

This is a 4 pack of female Mining gang members. They carry laser pistols. Their height is actually 31mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This is a 3 pack of Religious Zealot Gang members. They bear the robes and masks of their gang save for Eli on the left. Eli is blind but possesses another form of site. They carry Automatic weapons . Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. suggestions and critiques are welcome and appreciated

This is a 3 pack of Religious Zealot Gang members. They bear the robes and masks of their gang save for Eli on the left. Eli is blind but possesses another form of site. They carry Automatic weapons, one in the middle with an ammo drum . Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. suggestions and critiques are welcome and appreciated

This is a 4 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry revolvers. Their height is actually 31mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This model includes the weapons and figures pictured above. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This is a 4 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry plasma pistols. Their height is actually 31mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

This model includes the weapons and figures pictured above. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.