by
fakebusker83
Version 2.0
A pair of show accurate blasters for TF: Prime RID deluxe Arcee! These blasters are held by 5mm pegs, and they also have side peg holes for them to be mounted on the side of her bike mode!
This set is for those who have already owned the previously released "Spider Stinger" blades, and wanted just the blasters.
Version 1.0 is tested in White Strong Flexible. The current version 2.0 is untested.
Buyer beware.
A pair of show accurate blasters for TF: Prime RID deluxe Arcee! These blasters are held by 5mm pegs, and they also have side peg holes for them to be mounted on the side of her bike mode!
This set is for those who have already owned the previously released "Spider Stinger" blades, and wanted just the blasters.
Version 1.0 is tested in White Strong Flexible. The current version 2.0 is untested.
Buyer beware.
by
Redshift
Transformers-scaled gauss rifle weapon with 5mm handle
by
fakebusker83
Version 1.0
A pair of Suppressor minigun accessories favoured for use by the D.R.E.A.D team! Each Suppressor is highly detailed and comes with a 360º swivel arm that allows it to act as a personnel mounted turret! The swivel attaches to any compatible 5mm port.
Each Suppressor comes in 3 components including the barrel assembly, main casing and swivel arm. Some assembly is required.
This model is successfully tested in White Strong Flexible and that material is recommended. For those who want only one Suppressor, you can get the left one here and the right one here.
A pair of Suppressor minigun accessories favoured for use by the D.R.E.A.D team! Each Suppressor is highly detailed and comes with a 360º swivel arm that allows it to act as a personnel mounted turret! The swivel attaches to any compatible 5mm port.
Each Suppressor comes in 3 components including the barrel assembly, main casing and swivel arm. Some assembly is required.
This model is successfully tested in White Strong Flexible and that material is recommended. For those who want only one Suppressor, you can get the left one here and the right one here.
by
Drawn-SteelHero
Double-barrelled gun designed for a Transformers custom, compatible with any figure that has 5mm peg holes. Length of gun 55mm.
by
fakebusker83
Version 2.0
"The Pulsar Proliferator fires a burst of 'mini-pulses' at every trigger pull, and each pulse disintegrates on impact to discharge a potent energy packet on the target. Unfortunately, field tests have not proven promising as the pulses dissipate over a short distance, which basically allows longer ranged opponents to dominate the battle field. In closer ranged combat however, the total pulsatory impact is devastating."
The Proliferator is held using a removable 5mm peg handle which can be installed in the stock on under the main chassis for maximum adaptibility with different figures. There is a 3mm clip rail behind the pump handle for additional accessories.
The Profilerator is 7.0 cm in length.
This model has been successfully tested in White Strong Flexible.
"The Pulsar Proliferator fires a burst of 'mini-pulses' at every trigger pull, and each pulse disintegrates on impact to discharge a potent energy packet on the target. Unfortunately, field tests have not proven promising as the pulses dissipate over a short distance, which basically allows longer ranged opponents to dominate the battle field. In closer ranged combat however, the total pulsatory impact is devastating."
The Proliferator is held using a removable 5mm peg handle which can be installed in the stock on under the main chassis for maximum adaptibility with different figures. There is a 3mm clip rail behind the pump handle for additional accessories.
The Profilerator is 7.0 cm in length.
This model has been successfully tested in White Strong Flexible.
by
TreadshotA1
An upgrade kit for Fall Of Cybertron Deluxe Class Onslaught figure.
-
Kit includes: -- 2x Twin Cannons (Left/Right) -- 2x Hinges (Left/Right) -- 1x Hinge Blaster NOTE: WSF Polished is being allowed due to demand. Model has not yet been printed in this material. Purchasing this model in WSFP is at the buyer's risk.
by
ChaosIncarnate
Like many of you, I have seen the comic insert for the Perfect Effect Not-Arcee, and that panel with the guns...that's cool. But her guns look nothing like that. So I modeled a couple cool guns that look like that. These use the standard 5mm pegs, and are nice and bulky, for that cool look. These have been printed and confirmed to look utterly badass.
by
MiniMunitions
specialized set of armor for Super Soldier 052
by
fakebusker83
Version 1.0
This is a Spiker blaster favoured for use by the D.R.E.A.D team. It is held by a 5mm peg handle. This model has been successfully tested in White, Strong Flexible.
This is a Spiker blaster favoured for use by the D.R.E.A.D team. It is held by a 5mm peg handle. This model has been successfully tested in White, Strong Flexible.
by
process
Another sniper rifle for Generations Perceptor, or any figure with 5mm fist holes. Inspired by IDW.
by
Jonathaɳ
Are tanks giving your infantry soldiers trouble on the Battlefield? Tired of lugging around large tank busting weapons? Well worry no more! New from SRX Industries, the SRX Mini Tankbuster! It packs quite a punch, and yet keeps a small, convenient size. Great for busting down troublesome walls, busting apart bunkers, and stopping tanks in their tracks!
Compatible with Lego Minifigures
by
Moffman180
A modern version of G1 Prowl, Bluestreak and Smokescreen's cartoon rifles, taking design aspects from the Hard Hero statue and cartoon screencaps
by
Tom.B
Bring the party to them! Make some noise! Seriously a LOT of noise, this weapon is banned on some worlds due to its auditory audacity! A heavy duty assault rifle with plasma grenade secondary fire. It's a danger to one's body as well as their hearing!
by
Cypherplex
G1-Styled weapon for RTS Perceptor figure
Polished White Strong and Flexible recommended
Painting required
by
MiniMunitions
armor for the forearms of your soldiers
by
MiniMunitions
Armor upgrade for Heavy Weapons Specialists
by
Tom.B
Finally a portable grenade launcher/mortar system made specifically for "Scrap Happy" brand munitions! Not a good shot? Who cares! Just kinda "shoot it over there" and win! Bolt and Scrap Happy, ensuring mutual annihilation for everyone.
by
sunlink
My own weapon design. This pistol has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
by
Automaster
Coming Soon: The Grim Warrior Blaster!! This updated blaster will complete your Transformers Classics Grimlock action figure. Don't forget to add on the Grim Warrior Sword! For smoothest and strongest results, print in White, Strong & Flexible Polished. Stay tuned for more details.
by
sunlink
My own weapon design. This pistol has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
by
sunlink
Inspired by the Revoltech Rodimus weapon. This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
by
Moffman180
CLP01, the first in a line of model weaponry based on Generation one designs, for use with any modern transformer featuring the 5mm peg system.
This model is based upon the Combaticon Swindle's pistol, including the flare detail along the barrel
by
Firelight78
A weapon designed from the collaboration of Humans and Bots a gun allowing for a scattered spray of energy blast similar to that of a humanoid shot gun.I used ammo drum on the design, I think it looks better then just a regular mag design.
Tested in WSF looks great no detail lost.
Will post pics soon.
by
Tom.B
Eat 'em up! A set of 2 devastating machine pistols. Each one fire molten-core rounds at stupid high fire rates! They literally melt in your hands!
by
javaco
Based on the Path Blaster from the Transformers FOC game.
Made to fit Generations Deluxe FoC Prime's right hand.
version untested
by
tcwjoe
Say hello to this little feller. This is our Electron Assault Rifle. This guy packs a real punch and comes with additional power cells right on top to keep you from running out of ammo when you're really in the heat of battle. A version with a stand is also available. Handle is 5mm pegged, and the forward grip is about 4.5mm to allow grip by open handed figures
Strong and Flexible materials highly recommended. This model can be tweaked with symbols and emblems if you contact us.
by
sunlink
Inspired by G1 Action Master Kick-Off weapon comes this gun. Gun has a 5mm peg so anything that can hold a 5mm peg should be able to hold this.
by
javaco
Rifle with details. Based on a gun I saw a figure holding on the TFW2005 boards. Not sure its origin but I liked it. Made with a 5mm handle. Sized for a Deluxe figure
by
javaco
based on Fansproject Protector's Rifle. instead of adding hot rods gun to the back, i made Classic Seeker's null ray launcher to it and gave it a nicer handle. UNTESTED
