by
JoshuaHarker
Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
neuralfirings
Sad Keanu comes in two sizes
Both are equally sad.
Teeny Keanu ($25) Little Keanu ($45)Want to get both?
+ 
Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?
by
neuralfirings
Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?
Sad Keanu comes in two sizes. Both are equally sad.
Teeny Keanu -- 2.6inches -- ($25) Little Keanu -- 4inches -- ($45)
+
Sad Keanu comes in two sizes. Both are equally sad.
Teeny Keanu -- 2.6inches -- ($25) Little Keanu -- 4inches -- ($45)Want to get a set?
+ 
by
richgain
This must surely be the smallest commercially available 3D puzzle cube in the world.
It is a tiny 7.5 mm across and presents a real challenge to solve and take apart - and not just because of its size.
It is an example of a sequentially interlocking cube which means that it won't fall apart once the pieces are slotted together.
You can find many more interlocking puzzle cubes in the microcubology shop.
The puzzle was inspired by the cover of Elbow's brilliant album, The Seldom Seen Kid.
It is a tiny 7.5 mm across and presents a real challenge to solve and take apart - and not just because of its size.
It is an example of a sequentially interlocking cube which means that it won't fall apart once the pieces are slotted together.
You can find many more interlocking puzzle cubes in the microcubology shop.
The puzzle was inspired by the cover of Elbow's brilliant album, The Seldom Seen Kid.
by
byShapeways
Type in your text and we turn it into a customized metal branding iron.
Does not include the lighter.
The lighter is a BIC World, Classic, Maxi.
Want to make your own? Download the lighter attachment part here: http://www.shapeways.com/model/121517/ Do not flip/mirror the image, ie. please upload one you want as the actual result of the branding. If you have trouble uploading image like invalid file type, please make sure the filename has extension, for example, .jpg
Does not include the lighter.
The lighter is a BIC World, Classic, Maxi.
Want to make your own? Download the lighter attachment part here: http://www.shapeways.com/model/121517/ Do not flip/mirror the image, ie. please upload one you want as the actual result of the branding. If you have trouble uploading image like invalid file type, please make sure the filename has extension, for example, .jpg
by
MuseumofSmallThings
Kingdom: Animalia
Phylum: Mollusca
Class: Cephalopoda
Order: Octopoda
Suborder: Incirrina
Family: Octopodidae
Subfamily: Octopodinae
Species: Octopus vulgaris, the Common Octopus.
Members of the class cephalopoda are carnivorous hunters. They have the most advanced nervous system of all invertebrate animals and are an important example of advanced cognitive evolution in animals.
O. vulgaris is the most studied of all octopus species and possesses excellent eyesight, capable of distinguishing shapes, textures, and colour. It is the only animal which has been conclusively shown to use tools, and is proficient at learning simple processes such as unscrewing a jar.
Cephalopods are able to release dark pigment into the water as an escape mechanism, which in the past has been extracted and used by humans as an ink or dye. The word sepia comes from the Latin word for cuttlefish, s?pía.
The Ring:
This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart
Phylum: Mollusca
Class: Cephalopoda
Order: Octopoda
Suborder: Incirrina
Family: Octopodidae
Subfamily: Octopodinae
Species: Octopus vulgaris, the Common Octopus.
Members of the class cephalopoda are carnivorous hunters. They have the most advanced nervous system of all invertebrate animals and are an important example of advanced cognitive evolution in animals.
O. vulgaris is the most studied of all octopus species and possesses excellent eyesight, capable of distinguishing shapes, textures, and colour. It is the only animal which has been conclusively shown to use tools, and is proficient at learning simple processes such as unscrewing a jar.
Cephalopods are able to release dark pigment into the water as an escape mechanism, which in the past has been extracted and used by humans as an ink or dye. The word sepia comes from the Latin word for cuttlefish, s?pía.
The Ring:
This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart
by
Whystler
The "tertiant" is a simple astrolabe similar to the quadrant or sextant. It is useful for measuring unreachable altitudes, discovering local latitude, and finding the average of inclines.
This is the only Tertiant known to exist. The quadrant and sextant measure angles less the 90 degress. This astrolabe measures a full 120 degrees allowing the intrepid airship explorer to aim not only above, but also below.
Instructions: Look through the eyepiece, and line up your target with the sites (ie. north star for latitude, the top of a building or tree for altitude). When you do this, the dial will adjust itself by gravity to point out a degree on the guage. Zero is indicated by the vertical bar. Each second degree is marked by a small bar at the bottom of the guage, and these are grouped in ten degrees.
note: Before I release this for sale, I will be adding numbers on the guage, a ring at the top for hanging, and a ring on the end of the dial to hang a weight for more accurate readings.
This is the only Tertiant known to exist. The quadrant and sextant measure angles less the 90 degress. This astrolabe measures a full 120 degrees allowing the intrepid airship explorer to aim not only above, but also below.
Instructions: Look through the eyepiece, and line up your target with the sites (ie. north star for latitude, the top of a building or tree for altitude). When you do this, the dial will adjust itself by gravity to point out a degree on the guage. Zero is indicated by the vertical bar. Each second degree is marked by a small bar at the bottom of the guage, and these are grouped in ten degrees.
note: Before I release this for sale, I will be adding numbers on the guage, a ring at the top for hanging, and a ring on the end of the dial to hang a weight for more accurate readings.
by
nervoussystem
A striking cellular cuff inspired by microscopic cellular structures and created using computer simulation and 3d-printing.
this bracelet is size LARGE
also available in size MEDIUM
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
this bracelet is size LARGE
also available in size MEDIUM
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
by
Whystler
Here is an attractive and educationally useful pendant for the scholar, astronomer, steampunk enthusiast, or the lover of the unique and celestial.
The tellurion is a model of how the earth and the moon move in space. You will see that the eath rotates freely on its axis, orbited by the moon. Orbit the whole thing around a candle or lightbulb, and you have a full feldged model of the earth, the moon and the sun.
There is some talk that if you spin the little moon on this pendant around the earth with the right conditions, that you can travel forward and back in time! ;)
ASSEMBLY REQUIRED:
If you want a challenge, order this piece inexpensively here on Shapeways, and assemble it yourself at home. Assembly is not complex, but it does require some careful dexterity and a little strength. Disclaimer: If you order this model here and assemble it yourself, Whystler is not responsible for any damage you may cause to it. If you assemble this piece with care and patience, then you will have a nice piece of jewelry.
Watch for the assembly video. In the meantime, check out the showcase video below!
The tellurion is a model of how the earth and the moon move in space. You will see that the eath rotates freely on its axis, orbited by the moon. Orbit the whole thing around a candle or lightbulb, and you have a full feldged model of the earth, the moon and the sun.
There is some talk that if you spin the little moon on this pendant around the earth with the right conditions, that you can travel forward and back in time! ;)
ASSEMBLY REQUIRED:
If you want a challenge, order this piece inexpensively here on Shapeways, and assemble it yourself at home. Assembly is not complex, but it does require some careful dexterity and a little strength. Disclaimer: If you order this model here and assemble it yourself, Whystler is not responsible for any damage you may cause to it. If you assemble this piece with care and patience, then you will have a nice piece of jewelry.
Watch for the assembly video. In the meantime, check out the showcase video below!
by
jaylen
A flower-shaped tea-light holder. Suited for approx. 4cm diameter tea-lights.
UPDATE 11 November 2012: Thicker walls - Should now work with polished and dyed Strong&Flexible
UPDATE 11 November 2012: Thicker walls - Should now work with polished and dyed Strong&Flexible
by
Kidmechano
ModiRaptor is the scourge of the ModiBot universe and 47 parts of poseable madness. Highly articulated tail and body. Vice-like jaws and 12 moving claws. Compatible with ModiBot hex-fit figures and accessories. What can you imagine and build with these parts? Here is a download link for an Instructions- https://www.dropbox.com/sh/s4vil011e6yh916/B6w8_cOWDB
by
Dotsan
No 4 in the series of 3D printed animal heads.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 3 is a Rhino.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Tiger head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 3 is a Rhino.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Tiger head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
by
bitstoatoms
The 3D Printed Skull Brooch by Bits to Atoms continues the Popular Skull range to be held in place with two rare earth magnets so you do not need to place a pin through the lapel of your jacket to make it stay.
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
Masculine, elegant and tough.
Visit www.duanns.com to see more info on Bits to Atoms
NOTE: Does NOT include magnet
by
COVO
Product Name "Cat Skull Ring". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 11.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 11.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
by
Dimensionals
Owl pendant with open heart-shaped body. Pendant only (no chain).
***2/16/2013*** Updated model with enlarged loop for necklace links. Photos depict old version with smaller loop opening. ***3/5/2013*** Matching earrings available in smaller size through the Dimensionals store on Shapeways.
by
SiouX
remarkable Ring with belt-design.
Default size is 18.5 mm inner diameter.
I recommend (glossy) silver.
If you need a different ring-size, please click the personalize-button.
X-mas:
To check the time of delivery of your model, please see here:http://www.shapeways.com/holiday/planning
by
CLERCYSOPHIE
have a good day with that necklace... the pictures shows it in " antique bronze glossy"
shapeways kindly offer the necklace
shapeways kindly offer the necklace
by
cooldjez
Wirl consists of 4 strands, each 1mm thick. At several points the strands interconnect, so that the shape is fixed.
Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.
Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.
by
benny350
Ornamental Bonsai Tree sculpture. Great gift for a bonsai enthusiast or admirer.
by
KimberlyOvitzDesigns
Sleek collar necklace inspired by the intricate exoskeletons found in nature.
by
MichaelMueller
Follow the star... but watch your steps.
This pair of stars are for your shoelaces!
This pair of stars are for your shoelaces!
by
JuanManuelVargas
Yak, one of our lovely characters of our last game, Rain, Sand, Stars
More information :
http://itunes.apple.com/us/app/rain-sand-stars/id486071095?l=es&mt=8
Design by : Juan Manuel Vargas & Israel Castro
by
improbablecog
A beautiful floral pendant in an art nouveau style, from the same genus as the Tendril and Flora earrings.
Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick
Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:
- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com
Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)
That's it, otherwise have fun!
Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick
Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:
- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com
Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)
That's it, otherwise have fun!
by
DarioScapittaDesign
BLACK ROSE Earrings are a part of an entire jewellery set in polyamide material. The collection includes necklace, armband and ring available in different size and colours.
Wearing those objects it is like to have just drawed roses up on your skin. The rose's silhouette is able to decorate the body with a touch of glamour; a very classic style reinvented with a chic and modern style.
Earrings hooks are included. www.darioscapittadesign.com
by
HiLobster
This deer is from a short film called "the Hunt"
https://vimeo.com/17691326
by
lorddarthvik
Winged Skull ring with an inside diameter of about 24mm (US size 15,5)
It is Huge :D.
If you know your ring size and wish to order in a specific size, please send a messege!
by
DarioScapittaDesign
BLACK ROSE Necklace is a part of an entire jewellery set in polyamide material. The collection includes armband, ring and earrings available in different size and colours.
Wearing those objects it is like to have just drawed roses up on your skin. The rose's silhouette is able to decorate the body with a touch of glamour; a very classic style reinvented with a chic and modern style.
Standard size 37 cm of girth circa.
www.darioscapittadesign.com
by
MarmaladePark
A delicate bangle created from a repeating flower. The internal diameter is approximately 6.5 cm.
The coloured version shown here is a white model that I dyed by hand. Buy it here in black or white. If you'd like a custom colour I'd recommend dyeing the white version with Jacquard acid dyes that are suitable for nylon. I also have hand dyed versions at my Esty shop etsy.com/shop/MarmaladePark
by
baltimore
Four leaf clover ring.
Just add three friends who also have one.
If you saw last season's episode of It's Always Sunny in Philadelphia, then you'll know exactly what this is is a replica of. In the episode 'The Gang Gets a New Member' you see the four guys put their pinkies together, each sporting a ring, which makes up 1/4 of a four leaf clover. Show your Philly love with pride!
size 8.
It is meant to be a pinky ring, so keep that in mind. Order 4 for your gang!
Just add three friends who also have one.
If you saw last season's episode of It's Always Sunny in Philadelphia, then you'll know exactly what this is is a replica of. In the episode 'The Gang Gets a New Member' you see the four guys put their pinkies together, each sporting a ring, which makes up 1/4 of a four leaf clover. Show your Philly love with pride!
size 8.
It is meant to be a pinky ring, so keep that in mind. Order 4 for your gang!
