by
henryseg
A 3-dimensional version of the Hilbert space filling curve.
As shown in the photos, if printed in one of the "Strong & Flexible" plastics, it can be used as a bracelet or hair accessory. It takes a little time to reform back as a cube after being stretched, but it seems that leaving it overnight does the job.
by
curvecreative
Nanolet
Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.
The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.
Suitable for Small sized wrists. Available in a range of colors
Small is for a wrist of circumference 145mm - 165mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. More sizes coming soon.
Click here for all sizes
Click here to visit our site
Or click here to keep up to date on Facebook
by
Wahtah
A Sierpinski tetrahedron, the 3D version of the Sierpinski triangle, stage 5 I think. There are 4096 of the smallest tetrahedrons. The model has 499994 faces.
Update:
The edges are now almost 18 cm (7 in) long and it stands about 14.5 cm (5.7 in) high.
The model has been updated because the smallest struts were a bit too small to be printed. So it's now 1.5 times bigger in all directions.
The pictures are of the previous smaller version, the new version has been ordered successfully a number of times in WSF.
I created the model using POVray and MeshLab.
Update:
The edges are now almost 18 cm (7 in) long and it stands about 14.5 cm (5.7 in) high.
The model has been updated because the smallest struts were a bit too small to be printed. So it's now 1.5 times bigger in all directions.
The pictures are of the previous smaller version, the new version has been ordered successfully a number of times in WSF.
I created the model using POVray and MeshLab.
by
FreakyShape
Standard case for the Raspberry Pi computer.
This case was successfully test with a production Pi board.
I add an other clip and increase the thickness of all of them. So, on my pictures there are only 3 clips (for the closure system), but now there are 4 clips.
The power button standard works with this case (this is optional).
For more informations : http://freakyshape.com/
by
edrice
An assassin's ring with a gap in the bottom to activate a hidden blade. The ring itself is about 20.98mm wide, that should translate to 11 1/2 ring size in the US.
by
Dotsan
No2 in the series of 3D printed animal heads.
The Animal Head Collection.
No 1 is a Stag head.
There is also a 75mm version here and a 300mm version here
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
The Animal Head Collection.
No 1 is a Stag head.
There is also a 75mm version here and a 300mm version here
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
by
SheilaMunro
Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
COVO
Product Name "Keyboard Ring". Designed by Japan.
Type can be chosen the command key or the ctrl key.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Type can be chosen the command key or the ctrl key.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
Mstyle183
This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. ** This Design has been printed and tested.. You can now safely purchase it.
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. ** This Design has been printed and tested.. You can now safely purchase it.
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
by
nervoussystem
This 7" pendant lamp is covered by ridges and valleys that transmit different amounts of light when illuminated; they furnish a striking pattern whether the lamp is on or off.
We created the form by simulating a process where two chemicals diffuse across a surface and react with one another to form stable patterns. This process, reaction-diffusion, can be used to explain the intricate patterns found on the skin of many types of animals, from the spots of leopards to the radiating stripes of angelfish. Growing a pattern with different parameters can produce dramatically different results.
Here, we orchestrated a pattern that twists elegantly towards the base of the lamp where it terminates in a gentle spiral. Lines diverge and converge along the contours of the sphere, blanketing the surface in many deep grooves. We think the pattern recalls the forms of sand dunes and hard corals.
Only the shade portion of the lamp is shipped by shapeways. The light fixture can be purchased separately from us, email us at hello@n-e-r-v-o-u-s.com
Light Fixture The lamp comes with an eco-friendly 3-watt LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and plugs into the wall.
We created the form by simulating a process where two chemicals diffuse across a surface and react with one another to form stable patterns. This process, reaction-diffusion, can be used to explain the intricate patterns found on the skin of many types of animals, from the spots of leopards to the radiating stripes of angelfish. Growing a pattern with different parameters can produce dramatically different results.
Here, we orchestrated a pattern that twists elegantly towards the base of the lamp where it terminates in a gentle spiral. Lines diverge and converge along the contours of the sphere, blanketing the surface in many deep grooves. We think the pattern recalls the forms of sand dunes and hard corals.
Only the shade portion of the lamp is shipped by shapeways. The light fixture can be purchased separately from us, email us at hello@n-e-r-v-o-u-s.com
Light Fixture The lamp comes with an eco-friendly 3-watt LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and plugs into the wall.
by
hdrop
Masked Silver Skull Ring
A highly detailed, heavy skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Special instructions" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
A highly detailed, heavy skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Special instructions" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
by
MichaelMueller
Harr, harr, pirate stuff.
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
by
ArnaudCouturier
Put it with your keys on a key ring,
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
by
Bathsheba
The Schwartz D ("Diamond") surface is a triply periodic minimal surface, like the Gyroid. Here it's been translated in both normal directions, and one of the two resulting (identical!) surfaces networked. Another Schwarz surface is in metal here: http://bathsheba.com/math/schwarzd.
by
Ammnra
Ring inspired by Thermal Clips and N7 from the Mass Effect universe
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
byShapeways
This is a sample of Shapeways Gold Plated 3D Printed Stainless Steel.
24 Carat Gold Plated 3D printed stainless steel has a slightly pitted surface finish.. This material can be polished smoother for jewelry, structural parts, and antyhing in between. Shapeways 3D printed stainless steel is very strong and rigid with similar properties to 420 stainless steel, except it is infused with a bronze content of up to 30%.
You can purchase Shapeways Material Sample kits to get to know the entire Shapeways material range.
24 Carat Gold Plated 3D printed stainless steel has a slightly pitted surface finish.. This material can be polished smoother for jewelry, structural parts, and antyhing in between. Shapeways 3D printed stainless steel is very strong and rigid with similar properties to 420 stainless steel, except it is infused with a bronze content of up to 30%.
You can purchase Shapeways Material Sample kits to get to know the entire Shapeways material range.
by
BeepBeep3D
An 20 sided dice with embossed numbers. In Stainless Steel the dice weighs around 120 grams. This combined with the shine and coldness of the steel make an real impression.
by
Dotsan
This prickly sphere looks amazing in 3D, you can lose your self for hours playing and being mesmerized by it.
It doubles as an acupuncture ball, roll it around on your body ( I love it on my head) to relax and circulate your blood, the skin feels tingly afterwards.
It doubles as an acupuncture ball, roll it around on your body ( I love it on my head) to relax and circulate your blood, the skin feels tingly afterwards.
by
Dotsan
No 4 in the series of 3D printed animal heads. An alternative and less literal is Tiger Head 2.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 3 is a Rhino.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Tiger head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 3 is a Rhino.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Tiger head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
by
Dotsan
This size was created for doll houses A smaller version of the 570mm high Stag Head (which is not printable anymore) and 150mm version and a 300mm version here
The fine 1mm wire structure comes together to create a wonderful majestic stag head and a wonderful balance of weight in its form and subject with the lightness of structure.
Due to it's structure the cost have been kept to a minimum and allows you to order and experiment with colours.
I created a post of the development and unboxing the bigger versions here
The design is available as 2D print here Society 6
Modern Mini Houses
The fine 1mm wire structure comes together to create a wonderful majestic stag head and a wonderful balance of weight in its form and subject with the lightness of structure.
Due to it's structure the cost have been kept to a minimum and allows you to order and experiment with colours.
I created a post of the development and unboxing the bigger versions here
The design is available as 2D print here Society 6
Modern Mini Houses
by
unellenu
An ornament reminiscent of a tree, lightning and coral in its appearance.
The design suits well as a large, stylish pendant or a wall decoration.
This design is available also in strong and flexible material.
View a youtube video of this design, or scroll down to view the video below.
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
#101130_tree__00014_03.2
The design suits well as a large, stylish pendant or a wall decoration.
This design is available also in strong and flexible material.
View a youtube video of this design, or scroll down to view the video below.
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
#101130_tree__00014_03.2
by
Innovo
The perfect romantic gift for that someone ''special''...
I made this for my wife, which is a huge fan of Shakespeare and ''Sonnet CXVI'' is her favourite. The first two verses are engraved on the external surface of the ring and a dedication is engraved on the inside. The text is placed around the ring in a helix pattern, so that it can be read by simply revolving it in one direction.
The complete Sonnet CXVI:
Let me not to the marriage of true minds admit impediments. Love is not love, Which alters when it alteration finds,or bends with the remover to remove. Oh, no! it is an ever-fixed mark that looks on tempests.. and is never shaken. It is the star to every wandering bark whose worth's unknown, although his height be taken. Love is not Time's fool, though rosy lips and cheeks within his bending sickle's compass come. Love alters not with his brief hours and weeks, but bears it out.. even to the edge of doom. If this be error and upon me proved, I never writ, nor no man ever loved.
Choose your size at the chart above or here (US/CANADA sizes) and co-create your ring by pressing the ''Personalize'' button. You can choose your own dedication which will be engraved on the inside of the ring. Maximum number of characters, including spaces: 50
Note: The item you order may require cleaning of extra support material and/or polishing.
WARNING: Some materials such as Stainless Steel tend to shrink during the manufacturing process, sometimes up to 8%. Keep that in mind when ordering your custom size.
by
Innovo
This item appears to be a regular pendant depicting irregular lines and geometric shapes.
When viewed from the side, at the correct angle, this pendant reveals a secret message custom-made for the individual wearer. Engraved on the back, will be the name of the sender or receiver.
The perfect gift to let someone know your feelings :-)
Notes: Improvements were made on the prototype shown. The 3d viewer depicts more accurately the final product.
Minimum characters per message (capital letters): 10
Maximum characters per message (capital letters): 20
WARNING: The size of the final product may differ (shorter/thicker) depending on each custom design. It will never be more/less than 20% of the original.
by
Innovo
The perfect romantic gift for that someone ''special''...
The idea for this ring is based on my Sonnet Ring design. Instead of the first verses of a sonnet though, you are free to custom order a ring with your own text, message, proposal or poem.
Maximum number of characters (capital letters only), including spaces: 180 (roughly as much as a mobile text message).
Your text will be engraved on the external surface of the ring and a dedication will be engraved on the inside. The text is placed around the ring in a helix pattern, so that it can be read by simply revolving it in one direction.
Choose your size at the chart above or here (US/CANADA sizes) and co-create your very own ring by pressing the ''Personalize'' button. You can also choose your own dedication which will be engraved on the inside of the ring. Maximum number of characters, including spaces: 50
Note: The item you order may require cleaning of extra support material and/or polishing.
WARNING: Some materials such as Stainless Steel tend to shrink during the manufacturing process, sometimes up to 8%. Keep that in mind when ordering your custom size.
The idea for this ring is based on my Sonnet Ring design. Instead of the first verses of a sonnet though, you are free to custom order a ring with your own text, message, proposal or poem.
Maximum number of characters (capital letters only), including spaces: 180 (roughly as much as a mobile text message).
Your text will be engraved on the external surface of the ring and a dedication will be engraved on the inside. The text is placed around the ring in a helix pattern, so that it can be read by simply revolving it in one direction.
Choose your size at the chart above or here (US/CANADA sizes) and co-create your very own ring by pressing the ''Personalize'' button. You can also choose your own dedication which will be engraved on the inside of the ring. Maximum number of characters, including spaces: 50
Note: The item you order may require cleaning of extra support material and/or polishing.
WARNING: Some materials such as Stainless Steel tend to shrink during the manufacturing process, sometimes up to 8%. Keep that in mind when ordering your custom size.
by
IHeartEngineering
The part allows you to mount the Parallax Ping))) sensor on the Hitec HS-325HB Servo. It has been optimized for Shapeways printing with the Grey Robust material.
The activity light and connector pin outs are visible.
This part will require drilling and fasteners. Two M3x5mm and two M2x6mm screws are suggested. If you don''t have the necessary taps you can use nuts.
YouTube assembly Video is available here. http://www.youtube.com/watch?v=h5oXFVhrQr8
The activity light and connector pin outs are visible.
This part will require drilling and fasteners. Two M3x5mm and two M2x6mm screws are suggested. If you don''t have the necessary taps you can use nuts.
YouTube assembly Video is available here. http://www.youtube.com/watch?v=h5oXFVhrQr8
by
Innovo
The ''ShapeTool'' Multitool is a practical keychain accessory, useful for everyday tasks such as letter/cardboard box opening, cutting, scraping, screwing or puncturing.
''Shapetool'' specifications:
Length: 7,9 cm / Height: 2,1 cm / Width: 0,35 cm / Blade Length: 3,6 cm / Weight: 23gr
Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy, Silver and Silver Glossy). Please choose from the right.
For safety reasons when carried in a pocket, a protective sheath is recommended and available here.
Note: The item you order may require cleaning of extra support material, polishing and sharpening. The item will be shipped unsharpened and the bladed side can be used as a scraper.
by
philnolan3d
Sculpture of a woman made of "vines". Sculpted in 3D-Coat.
--
Altered from the original version to add more stability and structure.
If you have purchased this sculpture please comment on how you like it. :)
by
Mstyle183
This iphone 5 case Contains the Following:
Tank Iphone 5 Case (stronger case that protects most of the phone)
Card Holder 2 Credit Cards and 1 ID (wallet)
Money Clip
Bottle Opener Opening
It does not contain:
metal bottle opener Attachment
Earphone Organizer
Build in Kick stand
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchased my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
*** I made a quick video that shows how to put on and take off my cases. Also i have gotten some complains that depending on the printer, material or color material the kickstand comes stuck and it doesnt seem to work. So i made a quick video that shows how to loosen the support material on the hinges or sides using an exacto knife or safety pin so please watch this instructional video http://youtu.be/gfImxHyhfi0
Tank Iphone 5 Case (stronger case that protects most of the phone)
Card Holder 2 Credit Cards and 1 ID (wallet)
Money Clip
Bottle Opener Opening
It does not contain:
metal bottle opener Attachment
Earphone Organizer
Build in Kick stand
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchased my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
*** I made a quick video that shows how to put on and take off my cases. Also i have gotten some complains that depending on the printer, material or color material the kickstand comes stuck and it doesnt seem to work. So i made a quick video that shows how to loosen the support material on the hinges or sides using an exacto knife or safety pin so please watch this instructional video http://youtu.be/gfImxHyhfi0
by
moloko
Inspired by stone age weaponry, this arrow tip is an archetype charm that gives it's wearer strength and power to withstand the challenges of our everyday lifes.
Antique Bronze Matte, Stainless Steel or Gold Plated Matte are our personal favorites, as they emphasize the design with an authentic look and feel.
We recommend using a leather or rubber necklace. (Diameter of the hole is 4 mm, so any necklace of your choice should fit)
Also designed to be used as a key fob.
Antique Bronze Matte, Stainless Steel or Gold Plated Matte are our personal favorites, as they emphasize the design with an authentic look and feel.
We recommend using a leather or rubber necklace. (Diameter of the hole is 4 mm, so any necklace of your choice should fit)
Also designed to be used as a key fob.
by
cooldjez
The two rings above and below are supported by "scaffolding". This also proivides the fit around the finger.
Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.
Contact me if you want a size outside of the co-creator range. I can also provide this ring on request in a plastic material for casting in silver or gold.
by
kevinweinewyork
A medium bangle made of solid sterling silver. Angular star motifs make up a network of interlocking mirrored plates and engraved lines. Appears substantial, but is lightweight to wear. *NOTE: Bangle with silver lines available from Shapeways. Bangle with oxidized black lines available from my shop: www.kevinwei.com
