by
robo3687
NOTE: This ring does not come with a leather cord. You can easily (and inexpensively buy such a cord from ebay (search for 'flat leather cord') or from a craft store.
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
by
TheoJansen
The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
by
roessnakhan
A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.
by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
avandius
Dice set with percentile modeled in a Steampunk theme. The dice range from 16mm to 24mm.
by
neuralfirings
Sad Keanu comes in two sizes. Both are equally sad.
Teeny Keanu ($25)
Little Keanu ($45)
Want to get both?
+
Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?
Want to make some 3d printed goodies? Check out my latest project,
by
neuralfirings
Sad Keanu comes in two sizes
Both are equally sad. Teeny Keanu ($25) Little Keanu ($45)Want to get both?
+ Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?
Checkout my latest 3d printing web apps at
by
Bathsheba
A theorem walks into a bar...
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.
Yes, it really works!
Klein not-a-bottle-opener is here.
by
MichielCornelissen
Tool, symbol or both?
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
by
nervoussystem
The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling.
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.
Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.
Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp. We will send them to you free of charge if you purchase the lamp shade.
by
Admiral
An incredibly talented artist friend of mine (Chantell Hager; http://phantasyfaces.com/) drew some pictures of a dragon for me, so I might model this creature in 3D for fun and practice. Seeing as how it is a decently cool model, I thought I'd surprise her with a pendant of the model in return. This is a slight revision on my first Shapeways model. Some of the details that I had designed into the model were too small to show up in this size, so I revised the model to accentuate some of those features.
by
FreakyShape
Standard case for the Raspberry Pi computer.
This case was successfully test with a production Pi board.
I add an other clip and increase the thickness of all of them. So, on my pictures there are only 3 clips (for the closure system), but now there are 4 clips.
The power button standard works with this case (this is optional).
For more informations : http://freakyshape.com/
by
HiLobster
This is the same as Elephant Lovely but with a color shell.
by
MikeNaylor
A surprising arrangement of figures to create a mathematical form.
Please note that you must order TWO SETS to create the cube – each set includes two figures and four are necessary to create this sculpture. The figures are identical and snap together tightly hands to ankles to make this striking sculpture. Mix and match colors for your own effects. Or order more than two sets to experiment with other configurations.
This model is being exhibited at the Center for Arts Gallery at Towson University, June 30-July 28, 2012.
Please note that you must order TWO SETS to create the cube – each set includes two figures and four are necessary to create this sculpture. The figures are identical and snap together tightly hands to ankles to make this striking sculpture. Mix and match colors for your own effects. Or order more than two sets to experiment with other configurations.
This model is being exhibited at the Center for Arts Gallery at Towson University, June 30-July 28, 2012.
by
Charmed_Life_Designs
This steampunk-inspired pendant features three gears that spin round and round the center handle and gear. The gears, front, and clock hand all spin at different rates, producing a fascinating spin that will keep even the most fidgety hands occupied.
For the full effect, take a look at the video on youtube!
Thanks to José I. Romero for an insane amount of work on this design.
For the full effect, take a look at the video on youtube!
Thanks to José I. Romero for an insane amount of work on this design.
by
JoshuaHarker
The Guy Fawkes mask that has become a symbol of solidarity among the anonymous 99% of the "Occupy" movement & an indelible icon in political & pop culture. Smallest size (1 inch) available in Silver at this scale. Features a ring on the back to wear as a necklace or hang as a pendant.
by
aeron203
A clock frozen in time, the Time Keeper commemorates a birth date, an anniversary, or any other significant moment in your life, in history, or the future. It will keep that time with perfect accuracy, forever. You set the date and time. You can also include a short message below the date. The Time Keeper Pendant is 75% of the original size. 1.5 inches wide. UPDATE: The Time keeper has been thickened 50% to ensure printability.
by
SheilaMunro
Beautifully designed Dragon Claw Bracelet by: Sheila Munro. Inner circumference measurement is 19.5 cm. Inner Diameter is approximately: 65mm Distance between claws is: 32 mm. Wearable on the forearm as well. Medium version. Please contact for a custom size, also currently available in SMALL & LARGE. Please DO NOT try to bend open with metal prints to avoid any risk of injury! The metal will not bend, this is a strong, sturdy bracelet in metal. If these sizes will not fit you I will make a custom size no extra cost. ancienteyes@shaw.ca
by
Bathsheba
It's a zero, and it's a one! This steel pendant IS geek chic.
by
unellenu
"Wings' earrings.
Shapeways sends hooks with these 3D printed earrings.
A matching pendant is available.
See the earrings in gold plated
The unellenu store on shapeways for more great gift ideas.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
model# er_smth_111_74_05.4
Shapeways sends hooks with these 3D printed earrings.
A matching pendant is available.
See the earrings in gold plated
The unellenu store on shapeways for more great gift ideas.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
model# er_smth_111_74_05.4
by
noesis
Now you can carry a fortune telling I-Ching die with you wherever you go!
This 8-Sided die is hollow and can be worn as an attractive pendant. It ships with a 23" black necklace with a bayonet lock and is ready to wear, or roll!
Recommended in Stainless Steel, gold, Alumide or Bronze.
Reading your fortune using the I Ching: Roll the die twice (or once with 2 die) make a note of the trigrams from each roll, when stacked over the top of each other they create one of the 64 Hexagrams that will answer your question. The following website is a handy resource for interpreting the hexagram: http://www.psychic-revelation.com/reference/i_l/i_ching/i_ching_interpretation.html
This 8-Sided die is hollow and can be worn as an attractive pendant. It ships with a 23" black necklace with a bayonet lock and is ready to wear, or roll!
Recommended in Stainless Steel, gold, Alumide or Bronze.
Reading your fortune using the I Ching: Roll the die twice (or once with 2 die) make a note of the trigrams from each roll, when stacked over the top of each other they create one of the 64 Hexagrams that will answer your question. The following website is a handy resource for interpreting the hexagram: http://www.psychic-revelation.com/reference/i_l/i_ching/i_ching_interpretation.html
by
opresco
This design commemorates The Grand Opening of The New Roosevelt Tram linking
the beautiful Roosevelt Island to Manhattan; and, my 70th Anniversary; I had my ears
pierced – to wear my 3d Printed Genuine Sterling Silver Earrings – for this occasion :-)
See "Le tramway de Roosevelt Island reprend du service."
See my other Roosevelt Island Tram designs here:
Slice of Big Apple with Roosevelt Island Tram
The New Roosevelt Island Tram Cuff-Links
The New Roosevelt Island Tram / Pendant / Keyring
Pendant / Keyring with Roosevelt Island Tram
Keyring with Roosevelt Island Tram
Soccer Ball with Roosevelt Island Tram inside
Big Apple with Roosevelt Island Tram inside
Ring with Roosevelt Island Tram
Roosevelt Island Möbius Bracelet with Roosevelt Island Tram
Geocube with Roosevelt Island Tram inside
the beautiful Roosevelt Island to Manhattan; and, my 70th Anniversary; I had my ears
pierced – to wear my 3d Printed Genuine Sterling Silver Earrings – for this occasion :-)
See "Le tramway de Roosevelt Island reprend du service."
See my other Roosevelt Island Tram designs here:
Slice of Big Apple with Roosevelt Island Tram
The New Roosevelt Island Tram Cuff-Links
The New Roosevelt Island Tram / Pendant / Keyring
Pendant / Keyring with Roosevelt Island Tram
Keyring with Roosevelt Island Tram
Soccer Ball with Roosevelt Island Tram inside
Big Apple with Roosevelt Island Tram inside
Ring with Roosevelt Island Tram
Roosevelt Island Möbius Bracelet with Roosevelt Island Tram
Geocube with Roosevelt Island Tram inside
by
COVO
Product Name "Cat Ring". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
You can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
You can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
by
Dimmulain
This small funny glass marker will help your guests keep track of their glass. The diameter of the hole inside the marker is 2,5mm.
by
TheRogueAndTheWolf
A solid Sterling Silver Cat Skull ring to adorn your hands. Induces acute independence.
Available in various sizes. Feel free to contact us for any custom sizes and we’ll make it happen.
Most of our designs are in stock and ready to dispatch at The Rogue + The Wolf Etsy shop, so pop in and have a look if you are in a hurry.
Make sure to visit our new The Rogue + The Wolf website.
by
kubo
You know cats, they just need to know what is on the other side
by
vaclav.mazany
Highly detailed cat head jewel. Great as a gift !
by
RayOfHope
Ring with the inscription "This Too Shall Pass" which is a proverb indicating that all material conditions, positive or negative, are temporary. The phrase seems to have originated in the writings of the medieval Sufi poets, and is often attached to a fable of a great king who once charged his wise men to invent him a sentence, to be ever in view, and which should be true and appropriate in all times and situations. They presented him the words: "This too shall pass". How much it expresses! How chastening in the hour of pride! How consoling in the depths of affliction!. Many versions of the fable add the detail that the phrase is inscribed on a ring.
This ring is slightly lighter than the other "This Too Shall Pass" ring.
The Ring size is able to be ordered to suit you.
Click on Personalize to select your size.
Minumum size is US 4 1/2 (15.27mm Internal Diameter)
Maximum is US 13 (22.33mm Internal Diameter).
This ring is slightly lighter than the other "This Too Shall Pass" ring.
The Ring size is able to be ordered to suit you.
Click on Personalize to select your size.
Minumum size is US 4 1/2 (15.27mm Internal Diameter)
Maximum is US 13 (22.33mm Internal Diameter).
by
vaclav.mazany
Two cute little cats made as earrings with smile on they're face.
Available in Polished Silver and coloured Strong&Flexible.
Great as a gift for your beloved ones.
If you wish, yout might want to check these Cat Earrings
Available in Polished Silver and coloured Strong&Flexible.
Great as a gift for your beloved ones.
If you wish, yout might want to check these Cat Earrings
by
cunicode
one cup a day
Day 07: Champions Coffee Cup
30 days, 30 coffee cups project
View the collection
Day 07: Champions Coffee Cup
30 days, 30 coffee cups project
View the collection
3D Print in Ceramics vs. 3D Model
review & details
by
cunicode
This is Jana, a teleported teddy.
She just got 3D-Scanned, poly-abused and texturized.
Jana | Fetish Black
3D Printed in shiny black glazed ceramics, this Jana got a sleek fetishist look & feel.
She is the big sister, 2 inches tall (50mm).
Jana is 2in tall (50mm); perfect for sitting on your desk watching you surf the interwebs.
She is cool, just take some photos every now and then, and she'll be happy.
Jana loves music, loud and noisy if possible.
3D-Printed in full color, a very nice material with a sandstone finishing,
Get some of them, and they'll entertain themselves.
Jana Collection | Jana @cunicode +info & Photos
