by
fakebusker83
Version 1.6
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
by
fakebusker83
Version 4.5: Edited for peg locks to be sturdier.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
by
fakebusker83
Version 1.6: Fixed thin wall issue on missile fins.
This is a set to upgrade the Transformers Prime deluxe (FE) Starscream figure! It contains a blaster, 2 triple missile launchers, 2 single missile launchers, 2 knee spikes, and 1 head spike.
You can find installation instructions at my TFW2005.com thread.
This is a set to upgrade the Transformers Prime deluxe (FE) Starscream figure! It contains a blaster, 2 triple missile launchers, 2 single missile launchers, 2 knee spikes, and 1 head spike.
You can find installation instructions at my TFW2005.com thread.
by
fakebusker83
Version 2.0
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
by
fakebusker83
Version 3.0
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
by
fakebusker83
Version 3.0
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
Version 1.0
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
by
fakebusker83
Version 2.0
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
Version 2.0
This pair of hands are specially designed for the Human Alliance Bumblebee figure! Not only are they extremely posable, the right arm cannon feature of the figure is preserved and everything fits nicely in alt mode!
TFW2005 thread here (with assembly instructions.)
This pair of hands are specially designed for the Human Alliance Bumblebee figure! Not only are they extremely posable, the right arm cannon feature of the figure is preserved and everything fits nicely in alt mode!
TFW2005 thread here (with assembly instructions.)
by
Tom.B
--Right hand model----Set A contains all the components for the gun, the blades are in set B----A large cannon that transformers into a even larger sword! Perfect for your TF: Prime, Optims Prime figures. The Crusader even comes with a 4.7mm handle made just for your Reveal the Shield DX G2 Prime!
by
Tom.B
----Parts A contais parts for the gun, see also Part B. You will need to order both part A and B for a complete model.-----A small side arm weapon that converts into a knife for your DX transformer figures.
by
Tom.B
Right hand model----Set B contains The blades for the crusader, set A contains the gun parts ---- A large cannon that transformers into a even larger sword! Perfect for your TF: Prime, Optims Prime figures. The Crusader even comes with a 4.7mm handle made just for your Reveal the Shield DX G2 Prime!
by
Tom.B
----Parts B contains the blade for the pop-gun, see also part A. You will need to order both part A and B for a complete model.-----A small side arm weapon that converts into a knife for your DX transformer figures.
by
TecromDesigns
The Pit-Stop head model can be used with the Transformers Movie: DOTM, Human Alliance Sandstorm or Half-track figures. Pictured above is the head design printed in "Frosted Ultra Detail." The design fits very nicely on either the Sandstorm or Half-Track mold. The toy is fully transformable with the head attached and looks great in either mode. Please note that if ordered, you will only receive the head and the toy shown above is sold separately. .
by
Tom.B
----This is a left handed model, do not mix parts with right handed----Set A contains all the components for the gun, the blades are in set B---- A large cannon that transformers into a even larger sword! Perfect for your TF: Prime, Optims Prime figures. The Crusader even comes with a 4.7mm handle made just for your Reveal the Shield DX G2 Prime!
by
Tom.B
----This is a left handed model, do not mix parts with right handed--- Set B contains The blades for the crusader, set A contains the gun parts ---- A large cannon that transformers into a even larger sword! Perfect for your TF: Prime, Optims Prime figures. The Crusader even comes with a 4.7mm handle made just for your Reveal the Shield DX G2 Prime!
