Nanolet

Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.

The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.

Featured on: Mashable , Cult of Mac , Yanko Design and many more.

Suitable for medium sized wrists. Available in a range of colors

Medium is for a wrist of circumference 165mm - 185mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. Maximum wrist size is 190mm.

Unboxing Video here

Click here for OTHER SIZES

Click here to visit our site

Or click here to keep up to date on Facebook

Interested in buying Nanolets in BULK at reduced price? For LARGE , MEDIUM and SMALL

 This 2in wide cuff is truly a bold accessory! It features a flexible C-shaped design that fits closely against the wrist. It was grown from 4 separate root points which gradually intertwined into a single network.

watch the video to see how it was created!

Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

My case for Raspberry Pi computer. To be assembled with the "LED lightguide" model nr. 486757 (http://shpws.me/6yFP). This is the case everyone is talking about! ;) Features: snap-fit fixing system for the board, easy to mount/unmount; snap-fit closing system, no screw required; bottom holes for blocking the computer by screws (sliding mount); led lightguides (not included in this model, available here: http://shpws.me/6yFP ); pre-shaped hole for GPIO access, just cut it out to open. In this page you can find a gallery of shots working cases by enthusiast users! http://marcoalici.wordpress.com/raspberry-pi-case-gallery/

Make your own slide-on macro lens for the iPhone 4 or 4S. I designed this for my iPhone 4 when I couldn't find the image quality I wanted for less than $60.

Print this model and then buy the glass lens for $4 from Surplus Shed (http://www.surplusshed.com/). The Surplus Shed part number is L4471. For some reason the search box on the Surplus Shed home page does not work with part numbers. To get to L4471, use the "Lens Finder". In the Lens Finder type:

Lens Type: PCX, Plano Convex
Diameter: 12mm to 12mm
Focal length: 51mm to 51mm

It will get you to L4471

The lens fits in a recess in the model and is held in place with a few tiny drops of Superglue. If you get any glue on the lens it can cleaned off with nail polish remover or acetone. The lens is plano-convex (one side is flat). When inserted in the holder, the flat side of the lens faces the phone.

Note that the lens fits pretty snugly into the opening. Try fitting the lens before applying any glue. A good technique is, with the lens holder laying face-down on a table, lay the lens in position, and then push it into the recess by poking the lens with the eraser-end of a pencil. Once you know the lens fits cleanly, push it back out and put two tiny drops of superglue on opposite edges of the opening. I use a toothpick to apply the glue because squeezing the superglue directly out of the tube risks putting on too much. Then push the lens back in the same way as in the test fit.

The object pictures in the photo gallery (dime, ruler, and watch) are unedited and uncropped shots directly from my iPhone4.

This model will not slide over iPhone cases.

Case compatible with the Raspberry Pi computer. GPIO port access from the side of the case. Optionnal : led lightguides for design case V2. http://www.shapeways.com/model/576641/raspberry-pi-led-lightguides-for-design-case-v2.html More information on : http://freakyshape.com/portfolio/raspberry-pi-design-case-v2/

Working centrifugal compressor.

Designed to fit standard Mabuchi 130 motors.

Printed and tested.

Upon receiving the item, you'll need to use a 1.8mm drill bit to drill out the center hole. This is due to limitation of the printing process that may not allow the shaft of the motor to be inserted.

NEW! All in one integrated power pack for iPhone5. Order the KIT version here through Shapeways OR order completely assembled versions through our website at www.custompowersolar.com. Simple: Just slide your phone into the charger - it immediately starts charging your phone, plus you're free to continue using your phone while its charging without dangling wires to an external charger. When done, just grab the top of your phone and pull it out! No extra pieces to snap in, charger hold phone firmly in place while charging. Case holds iPhone, extended life 5000mah battery, and electronics to extend operating time an additional 3X. Includes electronics, replaceable battery and external rapid charger. iPhone 5 slips into top of case, and the charger and battery are hidden behind phone. Solar module option re-charges anywhere in full sun. Easy to carry solution for extending iPhone 5 battery life. White and black in stock. Kit version includes battery & electronics with self-adhesive backings that incorporate into case. Some assembly required, assembles in seconds. No tools required.
IMPORTANT! MUST fill out shipping address in order to have battery & electronics sent to you. Go to www.custompowersolar.com/contacts.htm Copy & paste link to your browser. Weight 138g

Many photographers lose there lenscap, especially me.
So it was time to solve this problem.

With this cap holder you just click your lenscap in and are ready to go.

This model is specially added to my shop for people who can't find there size.
So please make sure that your size isn't available in my shop before purchase this one.
Use the shapeways personalize option to send my your requested diameter.

Clothoid.A lamp is created by a mathematical curve formula and then that spline is lofted in 3d CAD software. Resulting form is parametric and adjustable in almost infinite number of combinations.

You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece.

This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.

NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com

The CardCase is now customizable! See Below

The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!

The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!

The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.

And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.

Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.

The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white

A pair of dangly Triple Matrix earrings.

A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.

When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!

More earrings

All models
A low profile case for the Raspberry Pi with sloped edges. Large open logo so the pcb board is visible and an open bottom frame with LEGO feet. The pcb board is clicked in the bottom part. The USB connector will stick out the front.
Along the side of the GPIO connector there are some holes, so it is easy to cut out, in order to get a flatcable out.
Case consist of 1.4 mm walls which makes it more expensive but is far more solid
It fits my production RPi perfectly. There still can small variations depending on the placement of the components. If you would like to purchase this, please note that if it does not fit, understand that I cannot and won't give a refund. Minor adjustments can be done with an exacto knife if it doesn't fit exactly.

The N12.bracelet gives you a little piece of the N12 system.

Unfortunately Shapeways has a different process for the color now, and the bracelet is no longer available in red. There still is white and black!

NANO DOCK:

Dock your iPod Nano 6G and give it a spot on your desk, cabinet or nightstand.

The Nano dock holds, syncs and charges your iPod Nano to prepare it for your next musical journey. Nano dock also transforms your Nano to an elegant table clock. See the time at your work desk or use it in the kitchen to perfect cook your egg with the Nano’s build in timer function.

The Nano dock makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and pull the cable through the back. The Nano dock is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.

The Nano dock is designed for the iPod Nano 6G, but may work with older iPod models as well.

It’s time to elegantly dock your Nano.

(To fully function your Nano as a clock; activate the ‘show clock after wake’ function in the settings).


Nano dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.

Wear your iPod nano 6th generation as a luxury watch.  Enjoy unlimited choice of band style, color and material!  Attach your existing watch band, or any standard band up to 20 mm wide.  Get one for sport, another for luxurious evening wear.  Use standard spring bars (not included) to attach the band as you would to most watches.

Your nano clips securely to this light but sturdy platform.  NanoDock adds no thickness.  Earphone connector faces sleeve for easy, discreet connection.

The part allows you to mount the Parallax Ping))) sensor on the Hitec HS-325HB Servo. It has been optimized for Shapeways printing with the Grey Robust material.

The activity light and connector pin outs are visible.

This part will require drilling and fasteners. Two M3x5mm and two M2x6mm screws are suggested. If you don''t have the necessary taps you can use nuts.

YouTube assembly Video is available here. http://www.youtube.com/watch?v=h5oXFVhrQr8

This is the product page for Pod à porter for the 3d generation iPod shuffle. For the 4th generation shuffle, go here.

In the street or at the beach: Pod à porter is the easiest way to wear your music, even when you’re not wearing much.

No more wire-tangle, earphones dangling by your knees, or ripping buds from your ears when you take off your jacket. Fits the 3d generation iPod shuffle and the Apple earphones it ships with; Pod à porter is available in various colors, as shown below.

If you're new to the Shapeways site: to order, you'll be asked to create an account; you can even sign in with twitter or facebook. Each ordered product is 3d-printed especially for you, price includes free worldwide shipping.
Pod à porter is manufactured from tough, but flexible polyamide, with a fine texture. Check the support/materials section of this website for more information. The product has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off. Product is shipped in basic Shapeways packaging.

Check www.michielcornelissen.com for assembly instructions and more information. If you have any feedback or questions on this item, please feel free to contact me directly at michiel@michielcornelissen.com.

Some of the mentions of Pod à porter when it was originally released:

Wear your shuffle and nothing else...
gizmodo.com

Pod à porter, a 3d-printed iPod shuffle necklace
wired.com

Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com

Very Smart.
joshspear.com

mocoloco.com

notcot.org

ilounge.com

design-milk.com

NY Times mentions Pod å`porter!
nytimes.com

Do you hate going to receptions and handing out bent business cards? Have you ever wanted to get a case for your cards but didn't like the same old style with a lid you had to open?

Meet the Card Carrier 2.0. Its legendary design not only holds up to 10 standard business cards while maintaining elegant aesthetics, but it also automatically dispenses a single card at the flick of a thumb! What could be better? Oh I know! Maybe the fact that it is also a template on the Shapeways Co-Creator platform!

With Shapeways Co-Creator you are able to download the PDF or JPG version of the template, Print it out, draw all over it, then upload back to this model for a 100% custom design. Actually, you don't even have to use a printer if you have MS Paint, Gimp or another free drawing software. Just download and digitally draw on the template however you want!

This would make a great gift for that special business person in your life! (Standard card size 2"x3.5")(It is recommended that this product be printed in WSF.)

PDF Download: http://jakedrews.webs.com/Shapeways%20Files/DRAWITCC2.pdf

JPG Download: http://jakedrews.webs.com/Shapeways%20Files/DRAWITCC2.JPG

A BlackBerry 9000 case inspired by the Human Fingerprint.

Case has been tested for everyday use and holds up nicely.

Looks best in WSF Polished.

Pieces fit together securely and can be removed with out much hassle.

All Ports and buttons are accessible.

*This item on sale does not come with the name "Aaron" on the back.

iPhone 4 bike mount for 1 1/4" bars provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.

Update: iPhone 4S owners, please use iPhone 4S bike mount 1 1/4"

Inside the cover frame there is place to insert a 0.3-0.5mm PVC foil as water protection. The touch display will still work through this foil.

Please note: the cover is not neccessary needed. This part is optional for more protection. Video at: http://www.youtube.com/watch?v=AHDGJ_1NVUk

If you have a 1" bar (24-26mm) please use: iPhone bike mount for 1" bar

All necessary parts except PVC foil are included in this assembly.

Bike mount an case has been tested for everyday use and holds up nicely. Pieces fit together securely and can be removed with out much hassle. All Ports and buttons are accessible.

This assembly includes the following uploads:
1 1/4inch bike mount
iPhone 4 bike mount (cover)
iPhone 4 bike mount (case)

A small Anemometer to measure the wind speeds while at the field flying.  Spinning cup arm assy. Dia. is 3 15/16"(10cm).

D.I.Y. instructions and pictures comming soon.

All that is needed to complete is:
1pc. - #6-32  x 1/2" (min.) or M4 x 15mm (min.)
1pc. - 0.25"(6mm) Dia. x 0.062"(1.5mm) Thick Magnet
1pc. - Bicycle Computer (Most Brands).  (The wheel sensor must not be taller than 20mm)
           {Program the computer for a rolling diameter of 783mm.}


(Optional):
1pc. - 1/2" Dia. x 3~4' length of a PVC pipe.  Stick one end of pipe in the ground and place the Anemometer on the other.

If you have any questions please feel free to send me a message.

Voronoi bracelet #2 (MEDIUM)

Inspired by the use of Voronoi diagrams in a large number of fields ranging from Astronomy to Zoology, we created various artifacts featuring complex voronoi structures.

Voronoi diagrams have been used by anthropologists to describe regions of influence of different cultures; by crystallographers to explain the structure of certain crystals and metals; by ecologists to study competition between plants; and by economists to model markets in the U.S. economy. [David Austin, Grand Valley State University]

In mathematics, a Voronoi diagram is a special kind of decomposition of a metric space, determined by distances to a specified family of objects (subsets) in the space. [Wikipedia]

Design

Internal diameter is 52 mm. The Strong & Flexible material that is provided by Shapeways is flexible enough to fit almost any medium wrist.

Also available in LARGE size.

The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure its diameter. Please contact for a custom size.

Materials

Recommended material for purchase: Strong & Flexible (any color).
Make sure that you check under 'Select Material' for currently available color options.

Click here to see more Jewelry >>

Reminiscent of lace and sea shells, the N12.choker uses the same patterning technique as the N12.bikini to create a flexible design that's completely printed at once, clasp included.

iPhone 4s credit card case design with integrated hinged snap on lid ensures your important items remain safe. Also, contains an integrated lanyard tie off area and room to attach a mirror.

The Cinemizer Base Holder designed by fpvmanuals holds the Cinemizer OLED base and clips on to your ski goggles. It has a cable retainer for the long signal cable that's difficult to solder due to the many leads. The cable receptacle makes it look nice and neat.

Everyone knows the coolest kids in high school were in band. And the coolest of the band kids? The tuba player. Well, after the kid who played the big drum. So second coolest. Now your iPhone can be the second coolest phone in school, and amplify tunes for you too! Please check out our iPhone cases on www.schreerdelights.com