by
joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
TerraCotta
If M.C. Escher had owned fidget toys, he would have worn "One ring to rule the ball" as a pendant. A single, continuous line contains a small ball that makes orbit after mesmerizing orbit but cannot escape, always held down in four directions. Available in solid, durable stainless steel with optional antique bronze and gold plated finishes to fit any context, "One ring to rule the ball" now also includes a free rubber necklace so that you can confuse your mind any time the fancy strikes you! One customer echoes many others in saying, "I couldn't put it down. This thing is just too fun!"
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
by
ThreeForm
Light, flexible, and easily paintable, these masks are great for Halloween, and make great accessories to spice up your party. This Venetian mask is a medium size. Fasten with elastic string (not included).
by
MacBurro
A Medium Steampunk Themed Model of a World for desk decorations
by
scientist2010
The Fencing Mask Pendant is a symbol for olympic fencing, power and the strength to face the fight, but stands as well for elegance and reserved naturalness.
Something very special to wear around your neck.
The Fencing Mask Pendant has with 2 cm (0.8 in) height exactly the right size for a necklace pendant. To thread the Fencing Mask Pendant onto a necklace, put the chain through the two holes on the back of the mask. The pendant will be hold in a perfect angle and is movable on the chain.
It is also perfectly suitable to be given as a prize at a fencing competition.
A cuff link version for gentlemen will be published soon.
Designed on May 29th 2012.
The Fencing Mask Pendant has with 2 cm (0.8 in) height exactly the right size for a necklace pendant. To thread the Fencing Mask Pendant onto a necklace, put the chain through the two holes on the back of the mask. The pendant will be hold in a perfect angle and is movable on the chain.
It is also perfectly suitable to be given as a prize at a fencing competition.
A cuff link version for gentlemen will be published soon.
Designed on May 29th 2012.
by
sorus083
These three parts Yin & Yang decoration represented by a pair of black and white koi fishes. This black fish is the first part.
To build them as a full decoration, all three parts has to be collected (Black & White Fishes and the holder).
The purpose of separated these statue is to make it easier for material combination so they don't have to be painted anymore.
To build them as a full decoration, all three parts has to be collected (Black & White Fishes and the holder).
The purpose of separated these statue is to make it easier for material combination so they don't have to be painted anymore.
by
mkermol
This is a small and light sculpture, that's perfect as an egg cup.
Part of our ongoing easter series this was designed as an atypical way to hold your egg for consumption.
Some easter traditions see the children weaving makeshift nests so the easter bunny could place eggs and gifts in them just after sunrise(usually leaving the kids wondering how in gods name did he get past them without anyone noticing).
This particular nest will also do nicely as a way to expose an easter egg that you particularly fancy in way that's both traditional and with a flare of modern design.
by
clenengo
This is an interpretation of the castle in Studio Ghibli's Howl's Moving Castle.
