The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!

The mechanism is printed assembled, and will work without further assembly right after birth from the printer.

A few tips to consider:

- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!

- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.

- The best way to push it is by its nameplate. Do not push down, but forward.

- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.

My case for Raspberry Pi computer. To be assembled with the "LED lightguide" model nr. 486757 (http://shpws.me/6yFP). This is the case everyone is talking about! ;) Features: snap-fit fixing system for the board, easy to mount/unmount; snap-fit closing system, no screw required; bottom holes for blocking the computer by screws (sliding mount); led lightguides (not included in this model, available here: http://shpws.me/6yFP ); pre-shaped hole for GPIO access, just cut it out to open. In this page you can find a gallery of shots working cases by enthusiast users! http://marcoalici.wordpress.com/raspberry-pi-case-gallery/

A d6 die inspired by the Portal Companion Cube.
Order includes one d6.

Modeled in blender 2.59.

Standard case for the Raspberry Pi computer. This case was successfully test with a production Pi board. I add an other clip and increase the thickness of all of them. So, on my pictures there are only 3 clips (for the closure system), but now there are 4 clips. The power button standard works with this case (this is optional). For more informations : http://freakyshape.com/

Build and customize your own Action Bot!- Modular, upgradeable, figure kit- highly poseable, snap-fit, ball joint construction! **This figure includes both knife and sheath accessories.** You can see a video showing how the figure assembles in the product pictures embedded above and a turnable 3d viewer of the model at- http://skfb.ly/5k4hedcb Enjoy!

Companion Cube storage box

Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!

From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!

If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?

The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)

Please also check out other products on my store and do not hesitate to contact me if you have any questions!

All models
A low profile case for the Raspberry Pi with sloped edges. Large open logo so the pcb board is visible and an open bottom frame with LEGO feet. The pcb board is clicked in the bottom part. The USB connector will stick out the front.
Along the side of the GPIO connector there are some holes, so it is easy to cut out, in order to get a flatcable out.
Case consist of 1.4 mm walls which makes it more expensive but is far more solid
It fits my production RPi perfectly. There still can small variations depending on the placement of the components. If you would like to purchase this, please note that if it does not fit, understand that I cannot and won't give a refund. Minor adjustments can be done with an exacto knife if it doesn't fit exactly.

The Mini Crowbar is both a decorative as well as practical keychain accessory (length of a typical key). It can be used for screwing, puncturing or as a keychain hanging hook.
 

Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy). Please choose from the right.

 

Warning: This crowbar is size small, about 30% smaller than the medium one.

This is my small one-piece driver/spanner tool with a number of different driver points:
6.5 x 1.2mm flat driver,
No.2 posidriv driver,
5mm hex driver,
4mm hex driver,
T25 torx driver,
1/4" hex bit driver,
13mm socket spanner.

An o-ring is required to complete the assembly to help hold a 1/4" square drive socket on the square post (5mm ID, 1mm diameter, not included).

This model is designed to be printed in Stainless Steel or one of it's variants.
The tool can easily be secured to a keychain or lanyard with a 10mm split ring or a No.2 McGizmo clip or similar 25mm gate clip using the hole in the flat driver.

There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.