Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)

If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.

Conversion chart for ring sizes:

US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm

I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)

Ring based on Portal 2 Wheatley

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

Two Part Ring based on Portal 2 GLaDOS.

SIZE 6

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black

Click for Size 6.5 White
Click for Size 6.5 Black

Click for Size 7 White
Click for Size 7 Black

Click for Size 7.5 White
Click for Size 7.5 Black

Click for Size 8 White
Click for Size 8 Black

Click for Size 8.5 White
Click for Size 8.5 Black

Click for Size 9 White
Click for Size 9 Black

Click for Size 9.5 White
Click for Size 9.5 Black

Click for Size 10 White
Click for Size 10 Black

Click for Size 10.5 White
Click for Size 10.5 Black

Click for Size 11 White
Click for Size 11 Black

Click for Size 11.5 White
Click for Size 11.5 Black

Click for Size 12 White
Click for Size 12 Black

Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Masked Silver Skull Ring

A highly detailed, heavy skull ring with a mechanical twist.
Looks great in both silver and stainless steel.

The rings band is only around 1.5 mm thick for wearing comfort.

You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.

US Ring Size      Inside diameter
       8                         18.1 mm
       9                         19.0 mm
      10                        19.8 mm
      10 1/4                  20 mm
      11                        20.6 mm
      12                        21.4 mm

You can order any US ring size between 8 and 12. Please specify the size you want in the "Special instructions" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.

Check out my other skull ring designs!

Product Name "Ring of the gamer". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

Ring based on Portal 2 GLaDOS.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

A TARDIS earring for the fans of Doctor Who. Based on my 5cm miniatures also available here: http://www.shapeways.com/model/123277/dr_who_s_tardis__5_cm_.html
http://www.shapeways.com/model/189295/tardis__simple_.html?gid=ug31952

Comes with earring hook! Remember, this is only ONE item. If you want two earrings (assuming you have two ears!) then you will obviously need to order another...
***** PLEASE READ BELOW ****
With all kinds of problems printing in silver and the fact that the lettering seems to have disappeared on upload I am taking this out of sale and will have to do a complete revision.
If you would like to be notified when I have done this please email me at gslinger at rogers dot com.

I wouldn't normally hang grass from my ears what due to the dirt, bugs, and possible grass stains but, with these Minecraft Grass Block earrings, you can avoid all those hassles while rocking your geek side.

The grassy textures on the sides were applied one color at a time to assure as clean and crisp colorations as possible. There is also a small (~2mm wide) tunnel for you to slide in a wire to hang the earrings from. This was done in order to keep the shape of the Grass Block as cubed as possible. I did not want any large loops coming off of the model itself as they take away from the aesthetic of the design.

Each earring is exactly 22x22x22mm and hangs in an isometric view to display all of the sides of the block at once.

This design is only offered in full color sandstone because, as you can probably imagine, without any of the color textures, this is a bare cube with a ~2.5mm wide tunnel born through one of the corners. There is also an open area on the bottom face to allow for draining of excess sandstone material. This was applied in order to decrease the weight of the earrings down to about 9.5 grams each.

Protip: I would reccommend hitting each earring with a little bit of clear acrylic paint in order to smooth out the surface and make the colors a bit bolder. The preview pictures above do not have any paint applied to them. Remember, many light coats are better than one thick coat.

This curious creature is from the classic game Chrono Trigger. The object is well balanced and will stay put wherever you place it, but be forewarned: the Nu is easily startled.

White detail is recommended for this object. It is very solid and paintable.

This is my Ring of Souls, a disturbing collection of laughing and crying faces, intermingled with hands and other tiny body parts. Unless you do metal casting, I suggest ordering it in Steel. In Steel, it's roughly US Ring size 11 1/2.

The iconic glyph used to represent the "Vault" in the popular multi-platform video game "Borderlands". Wear it as a pendant or use it as a keychain.

Slightly smaller size, Great for any size ball jointed dolls (recommend for yo-sd and msd) Photo with sd sized doll. Inspired from the anime, D. Gray Man A figurine of your favorite golem timcampy! A great item to sit on your desk, monitor or pencil cup (or wherever!) his talons help him to cling to items and sit properly. Item comes blank and unpainted, check out material options and more info from shapeways. See other sizes, commission your own unique item, or make requests. just send me a message. (commission info here: http://silverbeam.deviantart.com/journal/3D-printing-Commissions-355653134 wing and tail sections slightly fragile. Has been successfully printed at least two times in WSF