Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)

If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.

Conversion chart for ring sizes:

US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm

I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)

Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed  piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com  for shipping address.
Thank you.

Make your own slide-on macro lens for the iPhone 4 or 4S. I designed this for my iPhone 4 when I couldn't find the image quality I wanted for less than $60.

Print this model and then buy the glass lens for $4 from Surplus Shed (http://www.surplusshed.com/). The Surplus Shed part number is L4471. For some reason the search box on the Surplus Shed home page does not work with part numbers. To get to L4471, use the "Lens Finder". In the Lens Finder type:

Lens Type: PCX, Plano Convex
Diameter: 12mm to 12mm
Focal length: 51mm to 51mm

It will get you to L4471

The lens fits in a recess in the model and is held in place with a few tiny drops of Superglue. If you get any glue on the lens it can cleaned off with nail polish remover or acetone. The lens is plano-convex (one side is flat). When inserted in the holder, the flat side of the lens faces the phone.

Note that the lens fits pretty snugly into the opening. Try fitting the lens before applying any glue. A good technique is, with the lens holder laying face-down on a table, lay the lens in position, and then push it into the recess by poking the lens with the eraser-end of a pencil. Once you know the lens fits cleanly, push it back out and put two tiny drops of superglue on opposite edges of the opening. I use a toothpick to apply the glue because squeezing the superglue directly out of the tube risks putting on too much. Then push the lens back in the same way as in the test fit.

The object pictures in the photo gallery (dime, ruler, and watch) are unedited and uncropped shots directly from my iPhone4.

This model will not slide over iPhone cases.

Nanolet

Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.

The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.

Suitable for Small sized wrists. Available in a range of colors

Small is for a wrist of circumference 145mm - 165mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. More sizes coming soon.

Click here for all sizes

Click here to visit our site

Or click here to keep up to date on Facebook

This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. **

This Design has been printed and tested.. You can now safely purchase it.

I have several variations of this case that fit the iphone 5 and soon the Glaxy S3. I also have variations with kickstand and earbud organizers. Check out my store and have other features like kickstand. So if you like to see other models visit shapeways.com/shops/amznfx

**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet

** metal piece for the bottle opener has been created but needs to be purchased SEPARATELY. it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.

Go to amznfx.com/shopping-cart

My iPhone 5 case. The jaw serves as a clip for your pocket, pack strap, purse, belt, sock, underpants, or karate head band, etc. You can also stuff cash, credit cards, business cards, etc under the skull. The shapes reference the 6 primitives used in digital modeling. RIP Steve Jobs

This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. ** This Design has been printed and tested.. You can now safely purchase it.

** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.

Go to http://www.amznfx.com/shopping-cart/

**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet

A satire on superheroes, gadgets, consumerism and small caliber arms. As featured on Gizmodo, the Revolver iPhone is as irreverent, silly, amusing and provocative as ever.

http://gizmodo.com/#!5551267/irevolver

Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.

This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.

IMPORTANT:

You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945 

Product Name "Ring of the gamer". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

Put it with your keys on a key ring,
hang it on a chain / rope,
or lay it on a flat surface.

The hole for the chain / ring is 4.5 mm wide in diameter.

To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.

Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.

Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.

Companion Cube storage box

Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!

From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!

If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?

The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)

Please also check out other products on my store and do not hesitate to contact me if you have any questions!

The iShark is an iPhone 'gramophone.' It magnifies the tiny speaker on your iphone when you pop it in the slot in the iShark's back (and also making your iPhone a dorsal fin). The sound emerges from the iShark's mouth. The blue color image is a suggested paint scheme, but you can paint it to match your favorite species. It has been modeled hollow to save cost to you.

Privacy screen for your laptop webcam. Just clip it on when you don't want to be spied upon! Fits most sizes from thin to medium thick laptop screens.

(Note, prices reduced) This is the second part to the iVictrola, the Horn. You MUST buy both parts to have a functioning Victrola. The base may be found here: http://shpws.me/5i0m (Adding this to your cart will add both base and horn)

---

Want to get a set?

+

---

The Marble Cage is a cage to turn a 7/8" marble into a keychain.
The cage is to be closed with a keyring.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.

Read this post for more information
A new version is also available.

Marble, keyring or necklace not included.

For some reason shapeways had trouble printing so I increased the size. so it should work now.

A user-friendly adjustment to our award-winning Siri design, this iPhone 4/4s case is adjusted so as not to obscure the screen and can also function as an iPhone stand.

A 1/1 scale model of the Belt Buckle featured in the game. Available in 3 materials. The prop may vary from the illustration depending on material chosen for fabrication.

Here is the Han Solo iPhone 4 cover. As you can see the figure iself is actually 3d and actually resembles the Iconic moment in the movie. Various colours available. If you require the iPhone 5 version it's here :)

Hi guys I now offer you the Multi Pass from one of the best Sci Fi films around. It comes in raw WSF only. I have also seperated it into parts for you to customise add LED lights etc. The decals are downloadable please drop me a message if you require them. Thanks for your interest in my work Paul :)