This is my version of the Weighted Companion Cube from Portal. I built the model from scratch, using photos of the cube from the game as reference, then texture mapped it to match the one from the game.

I've made it into a hollow box, which you can use to store small stuff, like keys, secret maps, wedding rings, plutonium, ect.

You should get it printed in Color Sandstone, as it comes completely colored, no painting required! If you really want to paint it, I would suggest you get a "White, Strong, Flexible" print of my other Companion Cube model, as it makes a tougher and more easily paint-able Cube. You will need some form of Glue to put this version of the Cube together as well.

It's hard to see, but I put a faint picture of the Cake inside the box.

 Set of 17x 3D torpedo/missile markers suitable for space or air combat games such as Games Workshop's Battlefleet Gothic. This set of markers includes:

 - (2x) 1 torpedo markers
 - (2x) 2 torpedo markers
 - (4x) 3 torpedo markers
 - (2x) 4 torpedo markers
 - (2x) 5 torpedo markers
 - (4x) 6 torpedo markers
 - (1x) 7 torpedo marker

Torpedo markers come unpainted. For those who prefer a black undercoat, Black Strong & Flexible eliminates the need for black primer, as the material is matte and takes paint readily.

Any space ship models pictured above are from Games Workshop (and are obviously not included).

For more models in 6mm and 15mm scales, check out Anachron Games on Shapeways!

A detailed full color model of each of the first six planets (out to Saturn) and major moons of the Solar system, to (logrithmic) scale.
(Note: the full Solar System set of planets and moons is available as a set here)

All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 22mm (0.9 inch) diameter, and Earth is 11mm (0.45 inch) diameter.

This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.

The set contains six planets, and nine moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
 - Moon / Luna
Mars
Jupiter
 - Ganymede
 - Callisto
 - Io
 - Europa (attempt no landing there)
Saturn
 - rings of Saturn
 - Titan
 - Rhea
 - Iapetus
 - Dione

All objects have a 1.3mm (0.05 inch) hole at the south pole, about 3mm deep, for a brass axle (or a toothpick).

What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.

In areas where the model surface is more detailed than the most detailed NASA photography, the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)

Due to hard limitations of the Shapeways 3D printer, the moon Dione is using the surface map of Rhea. I chose Dione because the surface is very similar to Rhea, and it is the most minor moon in the set. The alternative was simply to remove an object, but I preferred the set to include four of Saturn moons, like it does for Jupiter.

The Earth, Moon, and Mars, to scale, with 3D surface terrain and full color from the latest NASA space imaging.

[See also the solar system set (but note that set is a logrithmic scale, not linear like this one)]

Dimensions:
Earth: 50mm (2 inches) diameter
Mars: 27mm (1 inches) diameter
Moon: 13mm (0.54 inches) diameter

Scale: 1 : 251102362

The Earth and Mars globes are hollow, with a 12mm (1/2 inch) hole at the south pole, giving them a flat bottom on which to sit without rolling, but each also comes with a matching cap/plug to seal that hole, to form a full sphere. (The moon is solid)

Special thanks to NASA / JPL-Caltech, for allowing the use of their planet surface terrain and mapping.

Companion Cube storage box

Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!

From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!

If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?

The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)

Please also check out other products on my store and do not hesitate to contact me if you have any questions!

Here are some very famous sci fi shuttle eagle transports from 1970s television. These are the 4 variations in 1/1000 scale, perfect for table top gaming, fleet style gaming. These were designed for WSF material, but I realize some prefer max detail with FUD, so I am keeping that material open for these. But do try to remember FUD is extremely weak and breaks easy. Remember ShapeWays tends to rotate designs in their printing containers, this sometimes changes the details in the appearance of the designs. ***Try some of our other ships to go with these & let us know what you think.*** Down in the comments area, we have a picture shared with us, from modeler Scouls502, Just click the little pic, and it will load the full size picture. Plus one he did for us to post in as the default picture. Scouls502 truely did these designs justice. The level of detail he was able to show in the designs, well we didn't honestly think it would show that well. Scouls502 good on you Sir. Have some cookies. PLEASE RATE THIS MODEL.

A heavy transport ship carrying everything a growing colony needs.

Every Team Fortress 2 Engineers must have tool; the Sentry Gun!

This model contains all the parts needed to build the "level 1" sentry gun (approximately 8cm x 6cm x 7.5cm from it's longest points). You can also purchase the parts necessary to upgrade this model to "level 2" and the final "level 3" from the links below.

Level 2
Level 3

The YouTube video linked demonstrates the assembly of all levels along with some additional information.

Please also consider visiting my website: www.psychobob.co.uk

PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".

DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.

A-150 Super Yamato 'Omi', naval miniature ship, scale model 1:1800 , Battleship

Design A-150, also known as the Super Yamato class, was a Japanese plan for a class of battleships. Begun in 1938–39, the design was mostly complete by 1941. Design A-150 would have been the most powerful battleships in history because of the massive size of their main battery of six 510 mm (20 in) guns as well as numerous smaller caliber weapons.

Displacement: Approximately 70,000 tons

This is the ultimate sci fi spaceship ever created, This is the famed Discovery One, science exploration sleeper vessel. As it was seen in the 1968 film 2001 A Space Odyssey. This would make a perfect deep space exploration vessel for any solid scifi RPG. We are not sure how well this would be in FD or FUD. Those materials are very weak and breaks easily. We will allow FD & FUD materials to be selected by those that insist on it, but this was designed for WSF, because it's stronger & can be handled, making it perfect for gaming. Select FD & FUD at your own risk. -------------- ***Be sure to check for other items in my shop that go with this.***

This is a full miniature set of the original four Perk-a-Cola Machines from Nazi Zombies. Each one is scaled to the correct size and each is about the size of a business card (to give you an idea of the scale).

All are printed in Full Color Sandstone. Each model is hollow with an opening on the bottom to reduce cost. The interior surfaces are reinforced to make them stronger. The signs on top are fragile so please handle with care.

Turn the odds in your favor with all four of the original Perk-a-colas. They are a great addition to any fan's collection.

Ordering this set is the best option if you want all four perk machines since it will save you near $10.00 USD compared to ordering the machines separately.

If you are interested in other models, check out these links:

Juggernog Perk Machine

Speed Cola Perk Machine

Double Tap Perk Machine

Quick Revive Perk Machine

Stag beetles are amazing creatures. They look like tiny knights in full armor. I think there a not many left of this brave soldiers ... I saw my last stag beetle when I was a kid!

This stag beetle can be used as a pendant!

There is an awesome scarab pendant available which was a great inspiration for this stag beetle. It was made by Elytra. Check it out!

First figure of my original character Cpt. Kraken. Set in a spoof world of video games, this first statue in a series visits Mario's mushroom kingdom!

Show your disapproval with this incredibly realistic sculpted version of the classic meme. Sculpted by yours truly, Ryan Kittleson in Zbrush and Sculptris.

This is fan art only.

Bloody Tongue Aspect of Nyarlathotep, from the Call of Cthulhu game the the Cthulhu Mythos.

The model is 3" (7.5cm) tall, and except for a hollow in the torso (to make the teeth look more menacing) is solid and weighted towards the bottom. It should be very sturdy and stable for use in a roleplaying game or for display.

Using most game stats I've been able to find, this version is approximately to scale with standard DnD minis.

As for materials, I recommend Alumide for the smooth finish, or Black Strong & Flexible. If you want to go super fancy, I imagine he would look quite nice in Black Glass or Antique Bronze Glossy,

This fully posable crayfish has moving joints - antennae, eyes, legs, claws, and tail - printed in place. It is inspired by the handmade articulated Japanese sculptures of insects and crustaceans, 'jizai okimono' which were popular in the Meiji era.

The default material is white nylon sintered plastic, which is relatively tough and can be painted with acrylic paints.

The ComputerCraft computer may not move, mine or build, but it has a certain elegance, from a simpler time.

NOTE: There is a rendering error in the 3D Preview of this model. As you can see from the photographs, the printed models do not have this problem.

A Transformers sized Plasma Cutter! Based on the Dead Space 2 design. For use with any DX transformer that needs to cut the arms and legs off some kind of horrible living nightmare!

Altogether in one single piece, present box can be opened.
Fully colored. Scale 1/10, about 16.5cm height.

Looks great under your christmas tree.

Stand available separately at http://www.shapeways.com/model/190107/
Can stand up perfectly fine by itself without requiring the stand.

Smaller scale version available trough the year at http://www.shapeways.com/model/197083/

Want more? Check out the other manga figures http://www.shapeways.com/model/164604/figurine__hana___17cm_.html!

Trouble with parents who want to see what's in that package you ordered? Add some PC fan grills to your order, that you can show them instead http://www.shapeways.com/model/170978/fan_grill_80mm.html (also available personalized)!

Kap van NS Bollenwagen in FUD, past op Arnold HN6121 silowagen onderstel.

Voor bouwbeschrijving zie deze 2 links:
http://forum.beneluxspoor.net/NS bollenwagen in N
Zie ook
http://www.n-spoorforum.nl/NS bollenwagen in N