by
DavidSun
As seen on blog.objet.com, this is the updated model of the one shown in video.
Now you can open the doors! This is the mid size model -- 2cm long. NO ASSEMBLY REQUIRED!
You are getting one model per print/order.
Let me know if anyone needs special text version. (thank you, happy birthday, etc)
** The older model, shown in video, is also available in my shop. **
by
DavidSun
As seen on blog.objet.com, this is the updated model of the one shown in video.
Now you can open the doors! This is the mid size model -- 2cm long. NO ASSEMBLY REQUIRED!
You are getting one model per print/order.
Let me know if anyone needs special text version. (thank you, happy birthday, etc)
** The older model, shown in video, is also available in my shop. **
by
BAROBA
An 3d version of one of M.C. Escher's drawings.
by
tedparsec
My third attempt to 3d print a rpg miniature.
I've tried to have fun with the position and the balance of the model. Same as with my other models, i expect some serious detail loss, that's why I've put emphasis on the silhouette of each figure, to make them very distinguishable, even at this scale.
I've tried to have fun with the position and the balance of the model. Same as with my other models, i expect some serious detail loss, that's why I've put emphasis on the silhouette of each figure, to make them very distinguishable, even at this scale.
by
joabaldwin
Half Life 2 meets Portal. Gordon Freeman and Alyx Vance's best friend, DOG, contemplating the beauty of his new toy, a companion cube. What else could you possibly want? Oh, that's right, Half-Life 2 Episode 3 would be nice...
Gabe, are you listening?
This uses the original texture maps from the game, you can even see the Lambda Half Life logo on DOG's back.
It wasn't easy! I had to remap all the textures manually, and fix all the geometry to make it printable and thick enough to support the weight. I also made most large pieces hollow, but you won't notice that at all (except in the reduced price this provided).
Gabe, are you listening?
This uses the original texture maps from the game, you can even see the Lambda Half Life logo on DOG's back.
It wasn't easy! I had to remap all the textures manually, and fix all the geometry to make it printable and thick enough to support the weight. I also made most large pieces hollow, but you won't notice that at all (except in the reduced price this provided).
by
kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
by
90grad@gmx.ch
Ring in the form of an octopus.
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us
by
TheoJansen
[Note: The seperate propeller does not fit the Ondula version! We are working on a propeller for the Ondula]
Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.
Currently there is no propellor available for this version, it is being worked on though!
In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.
Currently there is no propellor available for this version, it is being worked on though!
In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
by
ryankittleson
Based on the famous painting that's used to make antiquated versions of rap lyrics.
by
avandius
This is a hollow d6 die modeled in a Steampunk theme.
+
Want to get a set?
+ 
by
thehiddenice
Each badge is about 1.25 x 1.25 x .25. If anyone is interested in Individual badges, let me know and I'll upload them separately.
More badges to come.
by
GrimDarkBits
Set of 17x 3D torpedo/missile markers suitable for space or air combat games such as Games Workshop's Battlefleet Gothic. This set of markers includes:
- (2x) 1 torpedo markers
- (2x) 2 torpedo markers
- (4x) 3 torpedo markers
- (2x) 4 torpedo markers
- (2x) 5 torpedo markers
- (4x) 6 torpedo markers
- (1x) 7 torpedo marker
Torpedo markers come unpainted. For those who prefer a black undercoat, Black Strong & Flexible eliminates the need for black primer, as the material is matte and takes paint readily.
Any space ship models pictured above are from Games Workshop (and are obviously not included).
For more models in 6mm and 15mm scales, check out Anachron Games on Shapeways!
- (2x) 1 torpedo markers
- (2x) 2 torpedo markers
- (4x) 3 torpedo markers
- (2x) 4 torpedo markers
- (2x) 5 torpedo markers
- (4x) 6 torpedo markers
- (1x) 7 torpedo marker
Torpedo markers come unpainted. For those who prefer a black undercoat, Black Strong & Flexible eliminates the need for black primer, as the material is matte and takes paint readily.
Any space ship models pictured above are from Games Workshop (and are obviously not included).
For more models in 6mm and 15mm scales, check out Anachron Games on Shapeways!
by
richgain
Inspired by the logo on the cover of Elbow's album, The Seldom Seen Kid, this interlocking 3-piece puzzle is not as easy as it looks. Unlike all my other cubes, which were created in Burr Tools, this puzzle was modelled by hand to give every one of the cubes a bevelled edge. This not only makes it look more like the Elbow logo, it also makes the puzzle even trickier to take apart.
by
MaxSMoke777
This is my version of the Weighted Companion Cube from Portal. I built the model from scratch, using photos of the cube from the game as reference, then texture mapped it to match the one from the game.
I've made it into a hollow box, which you can use to store small stuff, like keys, secret maps, wedding rings, plutonium, ect.
You should get it printed in Color Sandstone, as it comes completely colored, no painting required! If you really want to paint it, I would suggest you get a "White, Strong, Flexible" print of my other Companion Cube model, as it makes a tougher and more easily paint-able Cube. You will need some form of Glue to put this version of the Cube together as well.
It's hard to see, but I put a faint picture of the Cake inside the box.
I've made it into a hollow box, which you can use to store small stuff, like keys, secret maps, wedding rings, plutonium, ect.
You should get it printed in Color Sandstone, as it comes completely colored, no painting required! If you really want to paint it, I would suggest you get a "White, Strong, Flexible" print of my other Companion Cube model, as it makes a tougher and more easily paint-able Cube. You will need some form of Glue to put this version of the Cube together as well.
It's hard to see, but I put a faint picture of the Cake inside the box.
by
jayfisher
A detailed full color model of each of the first six planets (out to Saturn) and major moons of the Solar system, to (logrithmic) scale.
(Note: the full Solar System set of planets and moons is available as a set here)
All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 22mm (0.9 inch) diameter, and Earth is 11mm (0.45 inch) diameter.
This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.
The set contains six planets, and nine moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
- Moon / Luna
Mars
Jupiter
- Ganymede
- Callisto
- Io
- Europa (attempt no landing there)
Saturn
- rings of Saturn
- Titan
- Rhea
- Iapetus
- Dione
All objects have a 1.3mm (0.05 inch) hole at the south pole, about 3mm deep, for a brass axle (or a toothpick).
What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.
In areas where the model surface is more detailed than the most detailed NASA photography, the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)
Due to hard limitations of the Shapeways 3D printer, the moon Dione is using the surface map of Rhea. I chose Dione because the surface is very similar to Rhea, and it is the most minor moon in the set. The alternative was simply to remove an object, but I preferred the set to include four of Saturn moons, like it does for Jupiter.
(Note: the full Solar System set of planets and moons is available as a set here)
All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 22mm (0.9 inch) diameter, and Earth is 11mm (0.45 inch) diameter.
This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.
The set contains six planets, and nine moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
- Moon / Luna
Mars
Jupiter
- Ganymede
- Callisto
- Io
- Europa (attempt no landing there)
Saturn
- rings of Saturn
- Titan
- Rhea
- Iapetus
- Dione
All objects have a 1.3mm (0.05 inch) hole at the south pole, about 3mm deep, for a brass axle (or a toothpick).
What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.
In areas where the model surface is more detailed than the most detailed NASA photography, the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)
Due to hard limitations of the Shapeways 3D printer, the moon Dione is using the surface map of Rhea. I chose Dione because the surface is very similar to Rhea, and it is the most minor moon in the set. The alternative was simply to remove an object, but I preferred the set to include four of Saturn moons, like it does for Jupiter.
by
Kaetemi
Print size is 16.6cm high. Scale 1/10.
Altogether in one single piece.
Hollowed out inside, not colored.
Stands up without requiring stand.
Stand separately available @ http://www.shapeways.com/model/164605/figurine__hana___stand_.html
Or get the experimental universal figurine stand @ http://www.shapeways.com/model/168187/universal_figurine_stand.html
Also, check out this full color figurine, for only less than double the price! http://www.shapeways.com/model/190101/_santa_girl__figure__full_color_.html
Trouble with parents who want to see what's in that package you ordered? Add some PC fan grills to your order, that you can show them instead http://www.shapeways.com/model/170978/fan_grill_80mm.html (also available personalized)!
Altogether in one single piece.
Hollowed out inside, not colored.
Stands up without requiring stand.
Stand separately available @ http://www.shapeways.com/model/164605/figurine__hana___stand_.html
Or get the experimental universal figurine stand @ http://www.shapeways.com/model/168187/universal_figurine_stand.html
Also, check out this full color figurine, for only less than double the price! http://www.shapeways.com/model/190101/_santa_girl__figure__full_color_.html
Trouble with parents who want to see what's in that package you ordered? Add some PC fan grills to your order, that you can show them instead http://www.shapeways.com/model/170978/fan_grill_80mm.html (also available personalized)!
by
jayfisher
The Earth, Moon, and Mars, to scale, with 3D surface terrain and full color from the latest NASA space imaging.
[See also the solar system set (but note that set is a logrithmic scale, not linear like this one)]
Dimensions:
Earth: 50mm (2 inches) diameter
Mars: 27mm (1 inches) diameter
Moon: 13mm (0.54 inches) diameter
Scale: 1 : 251102362
The Earth and Mars globes are hollow, with a 12mm (1/2 inch) hole at the south pole, giving them a flat bottom on which to sit without rolling, but each also comes with a matching cap/plug to seal that hole, to form a full sphere. (The moon is solid)
[See also the solar system set (but note that set is a logrithmic scale, not linear like this one)]
Dimensions:
Earth: 50mm (2 inches) diameter
Mars: 27mm (1 inches) diameter
Moon: 13mm (0.54 inches) diameter
Scale: 1 : 251102362
The Earth and Mars globes are hollow, with a 12mm (1/2 inch) hole at the south pole, giving them a flat bottom on which to sit without rolling, but each also comes with a matching cap/plug to seal that hole, to form a full sphere. (The moon is solid)
Special thanks to NASA / JPL-Caltech, for allowing the use of their planet surface terrain and mapping.
by
QUATRO
Companion Cube storage box
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
by
Ammnra
Kit turns a Puzzle Cube into a Portal Companion Cube Puzzle
NOTE: This is just the white parts of the kit. Also buy Portal Puzzle KIt (1\2) for the whole set of parts
Instructions:
--Paint a Circle of Color on Each Side of Your Puzzle Cube (circle should be same size as black hoop part )
--Attach Corner parts using Super Glue
--Attach Edge parts using Super Glue (centering edges between corner parts)
--Attach Center parts using Super Glue (centering them in center square)
--Attach Black Hoop Parts using Super Glue (Center Parts with Edge Parts (Glue 100% of part to Cube or Hoops will fall off after next step)
--Carefully Dremel or Sand the Hoop Parts into 9 Sections Along Puzzle Cube Lines To Free the Puzzle Cube for Spinning/Solving\Un-Solving.
Thanks for your order and commitment to nerd culture!
NOTE: This is just the white parts of the kit. Also buy Portal Puzzle KIt (1\2) for the whole set of parts
Instructions:
--Paint a Circle of Color on Each Side of Your Puzzle Cube (circle should be same size as black hoop part )
--Attach Corner parts using Super Glue
--Attach Edge parts using Super Glue (centering edges between corner parts)
--Attach Center parts using Super Glue (centering them in center square)
--Attach Black Hoop Parts using Super Glue (Center Parts with Edge Parts (Glue 100% of part to Cube or Hoops will fall off after next step)
--Carefully Dremel or Sand the Hoop Parts into 9 Sections Along Puzzle Cube Lines To Free the Puzzle Cube for Spinning/Solving\Un-Solving.
Thanks for your order and commitment to nerd culture!
by
Mechanoid
Here are some very famous sci fi shuttle eagle transports from 1970s television. These are the 4 variations in 1/1000 scale, perfect for table top gaming, fleet style gaming. These were designed for WSF material, but I realize some prefer max detail with FUD, so I am keeping that material open for these. But do try to remember FUD is extremely weak and breaks easy. Remember ShapeWays tends to rotate designs in their printing containers, this sometimes changes the details in the appearance of the designs. ***Try some of our other ships to go with these & let us know what you think.*** Down in the comments area, we have a picture shared with us, from modeler Scouls502, Just click the little pic, and it will load the full size picture. Plus one he did for us to post in as the default picture. Scouls502 truely did these designs justice. The level of detail he was able to show in the designs, well we didn't honestly think it would show that well. Scouls502 good on you Sir. Have some cookies. PLEASE RATE THIS MODEL.
by
ryankittleson
UNSTOPPABLE! So, before you buy this, I just want you to know that there's a little addition to it that's different from the photo. Check out the 3D rendered image to see what I mean. I had to add this to make the graspers more sturdy. So I guess now it's more accurate to the meme AND less fragile! whoopie!
by
Psychobob
Every Team Fortress 2 Engineers must have tool; the Sentry Gun!
This model contains all the parts needed to build the "level 1" sentry gun (approximately 8cm x 6cm x 7.5cm from it's longest points). You can also purchase the parts necessary to upgrade this model to "level 2" and the final "level 3" from the links below.
Level 2
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
This model contains all the parts needed to build the "level 1" sentry gun (approximately 8cm x 6cm x 7.5cm from it's longest points). You can also purchase the parts necessary to upgrade this model to "level 2" and the final "level 3" from the links below.
Level 2
Level 3
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
by
coines23
A heavy transport ship carrying everything a growing colony needs.
by
tristan_bethe
3D Scan of Grandpa
Photo References can be downloaded here:
imageafter.com/temp/tristan/GrandPaReferences.zip
Photo References can be downloaded here:
imageafter.com/temp/tristan/GrandPaReferences.zip
by
Mechanoid
This is the ultimate sci fi spaceship ever created, This is the famed Discovery One, science exploration sleeper vessel. As it was seen in the 1968 film 2001 A Space Odyssey. This would make a perfect deep space exploration vessel for any solid scifi RPG. However due too no real size agreement that we can find, We scaled this to the drawings, and the actual model they used for filming and just set the scale to the entry hatch on the port side of the primary hull. Which we guessed to be roughly 2 meters tall. We hope this now explains the scale of this ship to everyone's satisfaction. We have opened this for more materials to be selected by those that insisted on it, but this was designed for WSF, because it's stronger & can be handled, making it perfect for gaming. ------- ***Be sure to check for other items in our shop that go with this.*** ------- I.E. the Moonbus, and we are working on the Aries 1B.
by
Brian123
- Limited Run! After 25 orders it will no longer be sold.
Don't miss this rare sculpture of Spike!
Update: First batch of orders are shipping. Enjoy your Spike sculpture!
Spike the dragon happily finishing another letter:
More than just a figure, the props and base complete a charming scene that's more impressive in person. Fine detail down to the tiny uvula in his mouth. Stands an impressive 5.079 inches tall.
Please note: This sculpture is 100% modeled by me. This is not a toy, it's meant for display only. If there are any issues with your sculpture, Shapeway's customer service is top notch.
Artist's Proof:
Photos are from the first test print at only 4.879 inches or so tall. The inkwell's inner black wall bleeding has been fixed with thicker walls and black only at the bottom. Other changes: book pages slightly brighter, eyebrows and knee marks darker, sharp points rounded a bit and model height increased by 0.2 inches. Will update with 2nd Artist's proof.
by
Psychobob
Every Team Fortress 2 Engineers must have tool; the Sentry Gun!
Been busy taking out enemies? Time to upgrade your sentry then to the it's most powerful state; Level 3!
This model contains parts needed to build the "level 3" sentry gun. You will also either need to have already purchased the parts for "level 1" and "level 2" or purchase them along with these parts before you can build the level 3 gun. Once assembled with the previous levels, the model will be approximately 9.5cm x 11cm x 9.5cm from it's longest points.
Links to the level 1 and 2 parts can be found below.
Level 1
Level 2
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
Been busy taking out enemies? Time to upgrade your sentry then to the it's most powerful state; Level 3!
This model contains parts needed to build the "level 3" sentry gun. You will also either need to have already purchased the parts for "level 1" and "level 2" or purchase them along with these parts before you can build the level 3 gun. Once assembled with the previous levels, the model will be approximately 9.5cm x 11cm x 9.5cm from it's longest points.
Links to the level 1 and 2 parts can be found below.
Level 1
Level 2
The YouTube video linked demonstrates the assembly of all levels along with some additional information.
Please also consider visiting my website: www.psychobob.co.uk
PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".
DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.
by
avandius
Take the traditional Jacks game to a whole new level. These standard sized Jack dice feel amazing in your hand and roll even better.
With percentile die.
With percentile die.
by
joabaldwin
Charles Darwin's first ever sketch of a tree of life printed in solid silver. Each branch and minute detail of Darwin's original drawing is represented. The sketch appeared in his private notebook (“Notebook B on the transmutation of species,” 1837–1838).
Chain is NOT included, but a chain can easily be attached if you want to wear it. It comes in a soft black velvet bag.
A great gift for taxonomists, biologists, skeptics, humanists, atheists, lovers of nature and rational thought. Also a great gift for creationists, seriously, they'll love it! :)
The sketchy text on the same page of Darwin's notebook reads: "I think ... Case must be that one generation then should be as many living as now. To do this and to have many species in same genus (as is) requires extinction. Thus between A & B immense gap of relation. C & B the finest gradation, B & D rather greater distinction. Thus genera would be formed.—bearing relation."
Chain is NOT included, but a chain can easily be attached if you want to wear it. It comes in a soft black velvet bag.
A great gift for taxonomists, biologists, skeptics, humanists, atheists, lovers of nature and rational thought. Also a great gift for creationists, seriously, they'll love it! :)
The sketchy text on the same page of Darwin's notebook reads: "I think ... Case must be that one generation then should be as many living as now. To do this and to have many species in same genus (as is) requires extinction. Thus between A & B immense gap of relation. C & B the finest gradation, B & D rather greater distinction. Thus genera would be formed.—bearing relation."
by
salsag8r
This is a full miniature set of the original four Perk-a-Cola Machines from Nazi Zombies. Each one is scaled to the correct size and each is about the size of a business card (to give you an idea of the scale).
All are printed in Full Color Sandstone. Each model is hollow with an opening on the bottom to reduce cost. The interior surfaces are reinforced to make them stronger. The signs on top are fragile so please handle with care.
Turn the odds in your favor with all four of the original Perk-a-colas. They are a great addition to any fan's collection.
Ordering this set is the best option if you want all four perk machines since it will save you near $10.00 USD compared to ordering the machines separately.
If you are interested in other models, check out these links:
Quick Revive Perk Machine
