by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
sbruins
"I see you..."
Available in US ring sizes 8-13
See http://en.wikipedia.org/wiki/Ring_size for ring size reference.
Default Ring size is 9-3/4
Images shown after light polishing.
Available in US ring sizes 8-13
See http://en.wikipedia.org/wiki/Ring_size for ring size reference.
Default Ring size is 9-3/4
Images shown after light polishing.
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
LincolnK
Have you ever experienced such a great love for someone that it felt as if your heart was going to burst through your chest? It can even feel as if your entire rib-cage is now filled with your heart.
Inspired by my own experience of falling in love, this is a true artistic expression of a deep and pure love.
Makes a meaningful gift for yourself or that very special loved one.
(Pictured with a necklace. Price is for pendant only)
Featured at multiple design shows including Dutch Design Week, Maker Faire, World Maker Faire, SIGGRAPH, and more!
A smaller version is available both as earrings and as a pendant.
Inspired by my own experience of falling in love, this is a true artistic expression of a deep and pure love.
Makes a meaningful gift for yourself or that very special loved one.
(Pictured with a necklace. Price is for pendant only)
Featured at multiple design shows including Dutch Design Week, Maker Faire, World Maker Faire, SIGGRAPH, and more!
A smaller version is available both as earrings and as a pendant.
by
nervoussystem
This 7" pendant lamp is covered by ridges and valleys that transmit different amounts of light when illuminated; they furnish a striking pattern whether the lamp is on or off.
We created the form by simulating a process where two chemicals diffuse across a surface and react with one another to form stable patterns. This process, reaction-diffusion, can be used to explain the intricate patterns found on the skin of many types of animals, from the spots of leopards to the radiating stripes of angelfish. Growing a pattern with different parameters can produce dramatically different results.
Here, we orchestrated a pattern that twists elegantly towards the base of the lamp where it terminates in a gentle spiral. Lines diverge and converge along the contours of the sphere, blanketing the surface in many deep grooves. We think the pattern recalls the forms of sand dunes and hard corals.
Only the shade portion of the lamp is shipped by shapeways. The light fixture can be purchased separately from us, email us at hello@n-e-r-v-o-u-s.com
Light Fixture The lamp comes with an eco-friendly 3-watt LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and plugs into the wall.
We created the form by simulating a process where two chemicals diffuse across a surface and react with one another to form stable patterns. This process, reaction-diffusion, can be used to explain the intricate patterns found on the skin of many types of animals, from the spots of leopards to the radiating stripes of angelfish. Growing a pattern with different parameters can produce dramatically different results.
Here, we orchestrated a pattern that twists elegantly towards the base of the lamp where it terminates in a gentle spiral. Lines diverge and converge along the contours of the sphere, blanketing the surface in many deep grooves. We think the pattern recalls the forms of sand dunes and hard corals.
Only the shade portion of the lamp is shipped by shapeways. The light fixture can be purchased separately from us, email us at hello@n-e-r-v-o-u-s.com
Light Fixture The lamp comes with an eco-friendly 3-watt LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and plugs into the wall.
by
QUATRO
Companion Cube storage box
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
by
jeff
I've always been attracted to honeycomb patterns. Hexagons in series are appealing to the eye. Here's a ring designed with this lovely polygon in mind. Inspired by honey, made for your honey, and now supporting the honey bee.
For each ring sold, jbare design will donate a portion of the profits to The Center for Pollinator Research at Pennsylvania State University. They are a leader in research efforts to understand the alarming phenomenon called Colony Collapse Disorder. You can also donate directly to Penn State here.
Click personalize to choose your US ring size. Refer to this chart for converting other ring sizes.
This piece is the perfect pair to the Honey Ring Skinny.
US Ring Size - Inside diameter
4 14.8mm
5 15.7mm
6 16.5mm
7 17.3mm
8 18.1mm
9 19.0mm
10 19.8mm
Any questions or special requests you can contact me here.
For each ring sold, jbare design will donate a portion of the profits to The Center for Pollinator Research at Pennsylvania State University. They are a leader in research efforts to understand the alarming phenomenon called Colony Collapse Disorder. You can also donate directly to Penn State here.
Click personalize to choose your US ring size. Refer to this chart for converting other ring sizes.
This piece is the perfect pair to the Honey Ring Skinny.
US Ring Size - Inside diameter
4 14.8mm
5 15.7mm
6 16.5mm
7 17.3mm
8 18.1mm
9 19.0mm
10 19.8mm
Any questions or special requests you can contact me here.
by
Fairesure
Heart shaped maze pendant. A tricky but wishfull way to heart ;o)
by
designerica
A little bit of honeycomb infused into your finger... my neighbor keeps bees on our roof and I was inspired by their hives. This ring looks fantastic in gold but I haven't managed to get pics of it yet. Shown in steel, size 7.
I'll make any size you need. There will always be an open spot in the back so you can tighten it a bit if you need to. I don't recommend trying to stretch any shapeways steel rings because they can break.
I'll make any size you need. There will always be an open spot in the back so you can tighten it a bit if you need to. I don't recommend trying to stretch any shapeways steel rings because they can break.
