by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
by
Gijs
Do you want to order more than 1 in a single color? Check out this set of 2, or this set of 4 to save some money
This eggcup is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
This eggcup is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
by
MichielCornelissen
The product at this page is the PadFoot model that fits perfectly to iPad 2 as well as the 3d and 4th generation iPad. For PadFoot for iPad 1, go here.
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
by
joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
by
avandius
Dice set with percentile modeled in a Steampunk theme. The dice range from 16mm to 24mm.
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
Bathsheba
A theorem walks into a bar...
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.
Yes, it really works!
Klein not-a-bottle-opener is here.
by
richgain
This must surely be the smallest commercially available 3D puzzle cube in the world.
It is a tiny 7.5 mm across and presents a real challenge to solve and take apart - and not just because of its size.
It is an example of a sequentially interlocking cube which means that it won't fall apart once the pieces are slotted together.
You can find many more interlocking puzzle cubes in the microcubology shop.
The puzzle was inspired by the cover of Elbow's brilliant album, The Seldom Seen Kid.
It is a tiny 7.5 mm across and presents a real challenge to solve and take apart - and not just because of its size.
It is an example of a sequentially interlocking cube which means that it won't fall apart once the pieces are slotted together.
You can find many more interlocking puzzle cubes in the microcubology shop.
The puzzle was inspired by the cover of Elbow's brilliant album, The Seldom Seen Kid.
by
nervoussystem
The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling.
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.
Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.
Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp. We will send them to you free of charge if you purchase the lamp shade.
by
colleenjordan
Why should your plants stay at home? They help clean the air you breathe, are beautiful, and create a wonderful conversation starter. Carry a sprout, a succulent, or a flower you found on your morning walk.
When buying this wearable planter through Shapeways, your necklace will come unfinished and without a cord. You can add a silver or leather cord of your choice to your necklace, or you can email hello@wearableplanter.com and we will mail you a leather cord for your planter.
by
joabaldwin
The design is based on the classic Celtic-style knot symbol for the World Tree from Norse mythology, Yggdrasil.
Inside the leaves you can see a small sphere of blue. If you look reaaally carefully, you could notice that the continents in the blue ball are in the shape of Pangea and not our current distribution.
Inside the leaves you can see a small sphere of blue. If you look reaaally carefully, you could notice that the continents in the blue ball are in the shape of Pangea and not our current distribution.
by
colleenjordan
A small necklace to carry plants with you throughout the day. Works well with a small succulent planted inside, or fresh picked flowers. When this is printed in Shapeways' detail materials, it is watertight and can accommodate a plant with some water.
If you purchase this item from our Shapeways shop, please email hello [at] wearableplanter.com and we will send you your choice of leather or cotton cord to go with your necklace, as well as instructions on how to add plants.
by
ShapeKays
This is a model of the woodcut picture made by M.C. Escher in 1965 called 'Knots".
It has since then been a challenge for 3d modelers and mathematicians.
As far as I know it has not been modeled in 3d up till now. (It has! see comments).
The model's height is about 8 cm.
It has since then been a challenge for 3d modelers and mathematicians.
As far as I know it has not been modeled in 3d up till now. (It has! see comments).
The model's height is about 8 cm.
by
90grad@gmx.ch
Ring in the form of an octopus.
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us
by
cunicode
one cup a day
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
by
WelshDesigns
Solid Marble like model. Full Color. Very accurate. 1.0 inch in diameter. View my store for a larger hollow version. This model has been a great selling item for me, and printed many times. Great for many different uses!
This model has been orderd many time since I first uploaded it. I'm curious, what are people doing with it, send me a message or post a comment please, I'm dying to know! What other sizes would you like to see? I love the idea a customer left to use these as a Geocache item. Great idea!
by
Vesa
Two piece puzzle ring.
Inner diameter 19mm.
NOTE: This is prototyped only in plastic. Tolerances may not work in metal.
Inner diameter 19mm.
NOTE: This is prototyped only in plastic. Tolerances may not work in metal.
by
artfulshrapnel
The worst ear plug the internet has to offer. Use this size for gauges up to 1" in diameter. Designed with a slightly raised rim for a snug fit.
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
by
unellenu
Snowflake fractal pendant or decoration, pictured in white, strong and flexible.
This design looks beautiful worn as a pendant, and can also be hung as a tree ornament.
Dimensions of the pendant are cm:4.75 w x 4.908 d x 1.332 h / in:1.9 w x 1.9 d x 0.5 h (the dimensions of every Shapeways model are also on each page - near the bottom of the page).
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website
http://unellenu.com
twitter: unellenu
http://twitter.com/unellenu
facebook: unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu sculpture and homewares
http://www.facebook.com/pages/Unellenu/188186071212813
http://www.youtube.com/unellenu1
by
unellenu
3D fractal sculpture / L.E.D candleshade: 'Pointy Shells'. The L.E.D Candle (light source) itself is not included. Shapeways 3D prints this small lightshade designed for an L.E.D candle. Please don't use with real candles. If you would like an L.E.D candle shipped separately from unellenu please contact unellenu(at)unellenu.com (& advise your Shapeways order number for the unellenu candleshade).
by
rinblad
An ornament in the shape of a tree, with some of the roots creating a garland around it. This ornament can stand on a surface or be hung in a window, in a tree or on a door. The branches produce a beautiful pattern regardless of which angle you view it in. All the lines is flowing and come together in harmony.
Please note that the "White Strong & Flexible" material will turn yellowish if you leave it in the sun. If you're going to hang it in a window, make sure it faces the side of the building with most shadow.
by
MichaelMueller
A dog, man's best friend.
It was a long way from the wild wolf to the pampered pet dog of these days. Remember, even your tiny terrier is a descendant of this wild and free beasts ... show some respect and treat them as friends, too!
In the sprit of this, the whistle is annoyingly loud to both: dogs and humans. So, this is no "silent" dog whistle.
The whistle was inspired by the antique whistles made in england in the late 1800s. If you want to know more about great whistlemakers like J. Hudson or T. Yates, check out one of this sites:
whistleshop.co.uk
whistlemuseum.com
It was a long way from the wild wolf to the pampered pet dog of these days. Remember, even your tiny terrier is a descendant of this wild and free beasts ... show some respect and treat them as friends, too!
In the sprit of this, the whistle is annoyingly loud to both: dogs and humans. So, this is no "silent" dog whistle.
The whistle was inspired by the antique whistles made in england in the late 1800s. If you want to know more about great whistlemakers like J. Hudson or T. Yates, check out one of this sites:
whistleshop.co.uk
whistlemuseum.com
by
CLERCYSOPHIE
50 ex limited edition, for each edition I change the file to change the number
This lamp "Labyrinth" is made in 2 parts .... underneath where you installed the socket (E14), the bulb is an LED bulb. The ball is slightly flattened below for more stability.I put brackets with screws so that both parties are interdependent.
Once the wire connected, nothing easier than to use the labyrinth to block it!
This lamp can also be installed on the ceiling!
interested by the lamp but prefer to receive the full version with the led bulb? let see my web site,
http://www.photophoreandco.com/en/index.html
This lamp "Labyrinth" is made in 2 parts .... underneath where you installed the socket (E14), the bulb is an LED bulb. The ball is slightly flattened below for more stability.I put brackets with screws so that both parties are interdependent.
Once the wire connected, nothing easier than to use the labyrinth to block it!
This lamp can also be installed on the ceiling!
interested by the lamp but prefer to receive the full version with the led bulb? let see my web site,
http://www.photophoreandco.com/en/index.html
by
pittance
Make your own 3D halftone picture from a grid of dots, all you need is a picture; faces work best!
I've included a photo of one of the prints when mounted & framed against a dark background - it's just for illustration, you won't get this with your order.
To keep the price down this model can't use more than the 30 x 30 (=900 in total) dots/pixels I used in the Halftone models I photographed for the illustration above - I will process your photo to make it the right size, if you would like a preview please email me: shapeways@fastness.co.uk
by
MaxiOli
This is an extension for the mini ES 2x2x2 puzzle
YOU NEED 8 PCS OF THIS to complete the "6 corners of the world" puzzle.
It was first showed at the following Twisty Puzzles Forum topic:
http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19866
For the stickers, you need to contact me at: rubikkocka@gmail.com
YOU NEED 8 PCS OF THIS to complete the "6 corners of the world" puzzle.
It was first showed at the following Twisty Puzzles Forum topic:
http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19866
For the stickers, you need to contact me at: rubikkocka@gmail.com
by
mdavisstudios
**This listing is for the right inner ear print.**
Images above are in stainless steel - this also comes out wonderfully in any of the bronze/gold coatings or in sterling silver. The first image shown is actually the left inner ear.
This unique silver-colored stainless steel pendant or earring is an anatomically correct model of the inner ear, modeled and 3D printed at actual life-size.
The inner ear, a tiny bony apparatus in the skull, is responsible for our sense of balance and hearing, and makes a great one-of-a-kind gift for someone in acoustics, audiology, or music.
Dimensions: 2 cm. in length
To get 18" dark silver chain and gift packaging order here: http://www.etsy.com/shop/mdavisstudios
Thanks for looking!
Images above are in stainless steel - this also comes out wonderfully in any of the bronze/gold coatings or in sterling silver. The first image shown is actually the left inner ear.
This unique silver-colored stainless steel pendant or earring is an anatomically correct model of the inner ear, modeled and 3D printed at actual life-size.
The inner ear, a tiny bony apparatus in the skull, is responsible for our sense of balance and hearing, and makes a great one-of-a-kind gift for someone in acoustics, audiology, or music.
Dimensions: 2 cm. in length
To get 18" dark silver chain and gift packaging order here: http://www.etsy.com/shop/mdavisstudios
Thanks for looking!
by
srjskam
A third order 3D Hilbert curve with 1.5 mm thickness & clearance. 2/8 blocks are rotated so that it forms a loop instead of an open curve.
See http://www.shapeways.com/model/108620/tiny_hilbert_cube_variation.html for a 1mm version and http://www.shapeways.com/model/109525/ for a 4th order 1mm version.
See http://www.shapeways.com/model/108620/tiny_hilbert_cube_variation.html for a 1mm version and http://www.shapeways.com/model/109525/ for a 4th order 1mm version.
by
lukas.suess
This is a four hole English pendant style ocarina.
It's tuned in G6 major.
The range is a full octave from G6 to G7.
A Fingering table is included in the images above.
The highest notes are pretty loud.
The lowest are modest; blow in very gently for them!
Keep it dry and don't enclose it airtight!
Only the White Strong & Flexible material was tested yet.
This material works really fine.
Its paintable too.
It's tuned in G6 major.
The range is a full octave from G6 to G7.
A Fingering table is included in the images above.
The highest notes are pretty loud.
The lowest are modest; blow in very gently for them!
Keep it dry and don't enclose it airtight!
Only the White Strong & Flexible material was tested yet.
This material works really fine.
Its paintable too.
