by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
Eeppium
A ring with crystals growing from it .
*Hole diameter 18,20mm* Size 8.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
*Hole diameter 18,20mm* Size 8.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
by
byShapeways
A ring with your name on a circle. The name will be connected to the other circles with has your name mirrored.
by
jeff
I've always been attracted to honeycomb patterns. Hexagons in series are appealing to the eye. Here's a ring designed with this lovely polygon in mind. Inspired by honey, made for your honey, and now supporting the honey bee.
For each ring sold, jbare design will donate a portion of the profits to The Center for Pollinator Research at Pennsylvania State University. They are a leader in research efforts to understand the alarming phenomenon called Colony Collapse Disorder. You can also donate directly to Penn State here.
Click personalize to choose your US ring size. Refer to this chart for converting other ring sizes.
This piece is the perfect pair to the Honey Ring Skinny.
US Ring Size - Inside diameter
4 14.8mm
5 15.7mm
6 16.5mm
7 17.3mm
8 18.1mm
9 19.0mm
10 19.8mm
Any questions or special requests you can contact me here.
For each ring sold, jbare design will donate a portion of the profits to The Center for Pollinator Research at Pennsylvania State University. They are a leader in research efforts to understand the alarming phenomenon called Colony Collapse Disorder. You can also donate directly to Penn State here.
Click personalize to choose your US ring size. Refer to this chart for converting other ring sizes.
This piece is the perfect pair to the Honey Ring Skinny.
US Ring Size - Inside diameter
4 14.8mm
5 15.7mm
6 16.5mm
7 17.3mm
8 18.1mm
9 19.0mm
10 19.8mm
Any questions or special requests you can contact me here.
by
designerica
A little bit of honeycomb infused into your finger... my neighbor keeps bees on our roof and I was inspired by their hives. This ring looks fantastic in gold but I haven't managed to get pics of it yet. Shown in steel, size 7.
I'll make any size you need. There will always be an open spot in the back so you can tighten it a bit if you need to. I don't recommend trying to stretch any shapeways steel rings because they can break.
I'll make any size you need. There will always be an open spot in the back so you can tighten it a bit if you need to. I don't recommend trying to stretch any shapeways steel rings because they can break.
by
cooldjez
This ring consists of 4 strips that are tightly wound.
Contact me if you want a size outside of the co-creator range.
I can also provide this ring on request in a plastic material for casting in silver or gold.
Contact me if you want a size outside of the co-creator range.
I can also provide this ring on request in a plastic material for casting in silver or gold.
by
lauradangerous
Abstract folded design ring with pointed ends and a crumpled paper look.
Recommended in White Strong & Flexible and Stainless Steel. White Detail for a beautiful snow-like matte finish (though not as durable)
by
dijitalkuyumculuk
KRST Ring
The default size is 18.1 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
The Shop http://www.shapeways.com/shops/dijitalkuyumculuk
The default size is 18.1 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
The Shop http://www.shapeways.com/shops/dijitalkuyumculuk
by
vertigopolka
Let this dodecahedron ornament be the star of your holidays! The gravity well on each side seems to be pulling the stars inward.
Additional ornaments from Vertigo Polka: Vertigo's Ornaments
Additional ornaments from Vertigo Polka: Vertigo's Ornaments
by
Mitus
Ring size 9 (available in all sizes).
Under the personalize button to choose your ring size.
For further information please consult the Ring Size Chart
Under the personalize button to choose your ring size.
For further information please consult the Ring Size Chart
by
vertigopolka
This ring is made from a continuous spiral, and the ring on this page is size 9-1/2.
Select your size and material for purchase below (see sizing chart for reference).
NOTE: You can change the material selection when you review your shopping cart.
Stainless Steel - $28.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Silver Glossy - $88.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Antique Bronze Glossy - $29.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Alumide - $8.50
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Red Strong & Flexible - $8.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Select your size and material for purchase below (see sizing chart for reference).
NOTE: You can change the material selection when you review your shopping cart.
Stainless Steel - $28.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Silver Glossy - $88.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Antique Bronze Glossy - $29.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Alumide - $8.50
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
Red Strong & Flexible - $8.00
size 7 size 7-1/2 size 8-1/2 size 9 size 9-1/2 size 10 size 10-1/2 size 11 size 11-1/2 size 12
by
lauradangerous
Ring resembling a wrapped-around crystal. Features an opening with interesting shapes inside.
Recommended in White Strong & Flexible for durability, and White Detail for a beautiful snow-like matte finish (though not as durable)
by
CLERCYSOPHIE
sizes on my shop:
S44 (fr) : 3 (US)
S48 (fr) : 4 1/2 (US
S53 (fr) : 6 1/4(US)
S56 (fr) : 7 1/4 (US)
S72 (fr) : 14? (US) very big size! no conversion I had to made it for an order
here is a good link to see the good size of ring.. I propose 5 sizes but of course I can upload others...
http://www.onlineconversion.com/ring_size.ht
S44 (fr) : 3 (US)
S48 (fr) : 4 1/2 (US
S53 (fr) : 6 1/4(US)
S56 (fr) : 7 1/4 (US)
S72 (fr) : 14? (US) very big size! no conversion I had to made it for an order
here is a good link to see the good size of ring.. I propose 5 sizes but of course I can upload others...
http://www.onlineconversion.com/ring_size.ht
by
romanvlahovic
GenusCircus S1R037
Class: jewelry
Type: ring
Order: solid wave
Size: 7 (17.3mm)
Class: jewelry
Type: ring
Order: solid wave
Size: 7 (17.3mm)
by
cooldjez
Custom 19.3mm edition.
This ring consists of 4 strips that are tightly wound.
This ring consists of 4 strips that are tightly wound.
by
henriquelana
Internal Diameter = 18 mm
Can be modified to other measures
by
SheilaMunro
Detailed Dragonfly Wing Ring! Designed by Sheila Munro. Available in 7-different sizes for the same price. US Ring Size-Inside diameter: 7-(17.3mm) 8-(18.1mm) 9-(19.0mm) 10-(19.8mm) 11-(20.6mm) 12-(21.4mm) 13-(22.2mm)
by
Hmbecodesign
This ring is for Donkey lovers.
Dimension is 18mm (interior diameter )
by
IgoRRR
Random structural ring inner diameter 20 mm
