one cup a day
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics

View the collection

new: available in Black Ceramics

Clothoid.A lamp is created by a mathematical curve formula and then that spline is lofted in 3d CAD software. Resulting form is parametric and adjustable in almost infinite number of combinations.

You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece.

This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.

NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com

A full-color, high-quality 3D-printed bust of the legendary, celebrated former Apple founder and CEO Steve Jobs, modeled and textured in a retro 3D pixel style by the Dutch Sevensheaven design studio.

Having this remarkable and unique gadget on your desk will undoubtedly make your friends and colleagues very jealous and earn you eternal respect.

Combine Steve Jobs with the also available Steve Wozniak bust to reunite the founding fathers of Apple on your desk.

This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design. It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.

A hanging cup for your double espresso the morning after ;-)
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.

Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.

Also available as a more sober version (standalone)

The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.

Check out this photo of black version here

Build and customize your own Action Bot!- Modular, upgradeable, figure kit- highly poseable, snap-fit, ball joint construction! **This figure includes both knife and sheath accessories.** You can see a video showing how the figure assembles in the product pictures embedded above and a turnable 3d viewer of the model at- http://skfb.ly/5k4hedcb Enjoy!

arDrone 2.0 bracket for GoPro 1 & 2 cameras
NOT COMPATIBLE with GoPro HERO3 - New design will be available shortly.

NEW click here for GoPro Hero3 mount for arDrone 2

This is 5 parts which must be cut appart before installation.
Instructions for installing the mount on your arDrone https://vimeo.com/55233318

EDIT - just added the extender to this product, it is two parts, put foam between them to lower the camera and further reduce vibrations.

I have some video on Vimeo, this was shot in WINDY conditions and look pretty bad, but you get the idea, as soon as the weather in LA improves for flying small copters, I will be updating the video. www.vimeo.com/41468132

GoPro Hero2 - I recommend cutting a disc of Lee Filter 9ND-P3 and sticking it under the glass on the protective cover as that will reduce the shutter speed and practically eliminate jello.

GoPro Hero1 - have slower shutterspeed and don't suffer as much from jello as hero2, but you can also use ND film to further reduce jello if required.

All kinds of precautions apply to this product, Im not responsible for your flying of this. or what you may do to your arDrone or GoPro camera... if somebody print this in red, do send me some pictures.

NOTES on getting beautiful video with arDrone-GoPro combinations. First, you MUST understand that even the arDrone 2.0 is under powered for wild flying. to stay in the air it must use power to force air down.. when you hang a GoPro under it, the battery empty faster because it use more power.
NEXT, understand moving, happens by the drone tilting, so it essentially is "sliding down a hill" by being at a angle.. so now to keep the same altitude the motor must work even harder.
Combining the sliding down a hill motion and the weight of the GoPro, means you are operating at the limit of what is possible with a arDrone. as a result the props and motors work hard creating lots of vibrations and shaking.
The solution is flying EARLY in the morning, when the air is cool and there is absolutely no wind or even a breeze, in completely still air, the arDrone do not need to compensate for wind and will fly much more stable and smoothly, and the motors will have less work to do, resulting in less vibrations. Early morning flights is key to getting amazing beautiful video from a GoPro mounted under a arDrone. There.. NOW you know. Happy Flying.

This sale include all parts required to mount you GoPro, arms and the adjustable cradle, it do NOT include arDrone, GoPro, GoPro protective lens.

Replacement part for inside hub of Bugaboo Chameleon Stroller.

3D print in stainless steel for maximum strength. You will most likely need 2 for each side of the each side of the stroller that is broken.

Check out Instructables for a step by guide how to repair your Bugaboo with Shapeways 3D printing.

This is not an official Bugaboo part, nor has it been endorsed by Bugaboo in any way.
There are no waranties of how this it wlll work it is simly a solution that worked really well for me that I wanted to share.

Flower Pump is inspired by the muscle of love,
...every artery leads straight to the heart ....

Upload your image and we will print it on this attachment for a lighter. The image will be scaled to a maximum of 2 by 2 cm.

- Lighter sold separately.
- The Lighter is a Cricket Electronic.
- Original lighter metal needs to be removed first.

If you are looking for a version that fits a different lighter go here: http://www.shapeways.com/model/111548/

*Please don not mirror your attachment, we will do this for you.

CLIP-IT for iPhone -US edition-

Your charge buddy on the go.

Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.

Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock it by clipping it to your charger. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.

Clip-it US is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (US version).

The European version of Clip-it is available here.


Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.

Julianna fractal lace,  fractal model, with a loop at the top for hanging.
Wear as a pendant , hang it on a wall, or near a window.

15.3cm X 9.5cm

The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu

All models
A low profile case for the Raspberry Pi with sloped edges. Large open logo so the pcb board is visible and an open bottom frame with LEGO feet. The pcb board is clicked in the bottom part. The USB connector will stick out the front.
Along the side of the GPIO connector there are some holes, so it is easy to cut out, in order to get a flatcable out.
Case consist of 1.4 mm walls which makes it more expensive but is far more solid
It fits my production RPi perfectly. There still can small variations depending on the placement of the components. If you would like to purchase this, please note that if it does not fit, understand that I cannot and won't give a refund. Minor adjustments can be done with an exacto knife if it doesn't fit exactly.

This little guy is a fox and proud of it.

This incarnation is best suited to use as a decorative object, but we're open to suggestions for how you'd like to see it modified for your use!

The two most interesting uses we've found so far are using the WSF (polished) version as a surprisingly striking little glow bulb if you shine a light inside it, and possibly using the (pleasantly hefty) stainless steel version as an imposing game board piece.


To the customer who recently ordered this in Antique Bronze Matte, we would love to hear from you as to how your order turns out! Please consider sharing a photo or your thoughts on it if you find the time. :)

This Water Still is designed for 28mm gaming. In a post apocalyptic future there is little more important that potable water. This makes a gangs water still a high priority target for rival gangs. suggestions and critiques are welcome and appreciated. The Pipes are slightly thicker than in my painted print. Shapeways made me thicken them up after I had printed it.

This phone allows you to use your phone while you are talking. It keeps the phone away from your head which is a good idea as the jury is still out on whether or not they cause brain tumors.

Just insert your Iphone earbuds and hands-free mic. The sound is crisp and clear. 

The style is taken from an old Bakelite phone and is a joy to use.

Some tips from Vert Design...
We've found that the White Strong & Flexible material works well but gets dirty after a bit of use so printing in the Black or Red might be a better idea. Alternatively, why not paint in your own custom colour.

Be careful when screwing on the end caps. We've made a small cutout designed for the cable but if it falls out before you screw on the endcap, the cable can get pinched.

Check out the improved bass response in the standard earbuds. Interestingly, the earpiece acts as a speaker chamber and the lower frequencies are pretty impressive!

 Clothoid.B lamp is created by a mathematical curve formula and then that spline is lofted in 3d CAD software. Resulting form is parametric and adjustable in almost infinite number of combinations.

You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece by Shapeways.

This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.

NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com

Heart Dipping Dish
This is a dish for dipping bread in olive oil. Fill the dish with enough olive oil to cover the heart, and then add balsamic vinegar to the heart. The vinegar will sink to the bottom and fill out the heart! You might need to push the vinegar around with a toothpick to fill out the heart really cleanly, but it is easy to do, and continues to look nice even after you start dipping bread.

There is a ring on the back of the pendant for a necklace. Offering this wonderful design for the low price of $29.95 in Glossy Antique Bronze material!

This wonderful work of sculpture by Seedling was inspired by crystal deposits known as geodes, true mineralogical wonders of nature. It looks like an alien’s gobstopper or a ‘jeweled self-dribbling basketball’ to quote the late psychonaut, Terrance McKenna. Made from 3D printed gypsum powder, the piece of psychedelic hardware will look great in any collection.

This is one grumpy taphandle

The classic old school Mario from the NES version of Super Mario Brothers, carefully translated to 3D pixels.

This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.

iPhone 4 bike mount for 1 1/4" bars provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.

Update: iPhone 4S owners, please use iPhone 4S bike mount 1 1/4"

Inside the cover frame there is place to insert a 0.3-0.5mm PVC foil as water protection. The touch display will still work through this foil.

Please note: the cover is not neccessary needed. This part is optional for more protection. Video at: http://www.youtube.com/watch?v=AHDGJ_1NVUk

If you have a 1" bar (24-26mm) please use: iPhone bike mount for 1" bar

All necessary parts except PVC foil are included in this assembly.

Bike mount an case has been tested for everyday use and holds up nicely. Pieces fit together securely and can be removed with out much hassle. All Ports and buttons are accessible.

This assembly includes the following uploads:
1 1/4inch bike mount
iPhone 4 bike mount (cover)
iPhone 4 bike mount (case)

It's a small coffee cup whose handle is a moebius strip.
It is only attached on one side (where it is horizontal): I guess such a shape should be difficult to do without 3D-printing.
Oddly enough, it is quite ergonomic: put your thumb on the vertical part of the moebius strip, put the opposite horizontal part between your index and your medium, et voilà!

Contrary to popular belief, scotch whisky is best not served with ice. Ice will shut down the flavour, instead a few drops of room temperature water will open out the flavour of the whisky. Add too much and you drown the whisky! This small jug can be used to hold water for adding 'just a drop' to bring out the full flavour of your whisky. Inspired by a water droplet, this would also look nice sitting on a shelf in any home. The large hole on the side is to fill the jug, if this hole is covered with your thumb when pouring, it also helps control the water flow for maximum control of the amount of water you add!

Scissors as used by Mike Bloomberg to cut the ribbon at Shapeways