by
tedparsec
My third attempt to 3d print a rpg miniature.
I've tried to have fun with the position and the balance of the model. Same as with my other models, i expect some serious detail loss, that's why I've put emphasis on the silhouette of each figure, to make them very distinguishable, even at this scale.
I've tried to have fun with the position and the balance of the model. Same as with my other models, i expect some serious detail loss, that's why I've put emphasis on the silhouette of each figure, to make them very distinguishable, even at this scale.
by
coines23
A rugged little ship, built for trading on the edge of civilized space
by
coines23
Carrying mass quantities of consumable goods from world to world.
by
Steve3d
A Unique and fearsome space battleship model kit. When assembled the model is 80 x 35 x 35mm (LWH)
by
B1lancer
This a OO scale model of the Irish Beet Box wagons. This is the superstructure only. To finish the wagon chassis/couplings are required; any standard 12ft wheelbase chassis will suit.
by
notnorm
This is a 3 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry . Their height is actually 30mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a single sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.
by
coines23
The Xuvaxi Adjudicator class heavy cruiser utilizes wildly advanced alien technology to enforce Xuvaxi dominance in the Aratouk Expanses.
by
GrimDarkBits
An ancient and powerful vessel of lost design, this strike cruiser is equally at home as a relic in a loyalist fleet, or the mainstay of a traitor force. Carrying a deadly cargo of marines, ready to board enemy ships or conduct a surgical strike at the heart of an enemy army, this millenia-old Pre-Heresy Strike Cruiser still punches well above its weight.
One ship, comes unpainted and without flight stand. Frosted Detail or Frosted Ultra Detail are recommended for best quality. Model has a 3/16" hole for a standard Games Workshop flight stand; not affiliated with Games Workshop in any way.
For more grim, dark models in 15mm scale, check out Anachron Games on Shapeways!
One ship, comes unpainted and without flight stand. Frosted Detail or Frosted Ultra Detail are recommended for best quality. Model has a 3/16" hole for a standard Games Workshop flight stand; not affiliated with Games Workshop in any way.
For more grim, dark models in 15mm scale, check out Anachron Games on Shapeways!
by
coines23
The Xuvaxi investigator is a common scout and patrol ship, fast but lightly armed.
by
coines23
With heavy armaments and powerful drives, the Belter attack cruiser defends the Belt's independence from pirates and hostile governments.
by
GrimDarkBits
Set of 17x 3D torpedo/missile markers suitable for space or air combat games such as Games Workshop's Battlefleet Gothic. This set of markers includes:
- (2x) 1 torpedo markers
- (2x) 2 torpedo markers
- (4x) 3 torpedo markers
- (2x) 4 torpedo markers
- (2x) 5 torpedo markers
- (4x) 6 torpedo markers
- (1x) 7 torpedo marker
Torpedo markers come unpainted. For those who prefer a black undercoat, Black Strong & Flexible eliminates the need for black primer, as the material is matte and takes paint readily.
Any space ship models pictured above are from Games Workshop (and are obviously not included).
For more models in 6mm and 15mm scales, check out Anachron Games on Shapeways!
- (2x) 1 torpedo markers
- (2x) 2 torpedo markers
- (4x) 3 torpedo markers
- (2x) 4 torpedo markers
- (2x) 5 torpedo markers
- (4x) 6 torpedo markers
- (1x) 7 torpedo marker
Torpedo markers come unpainted. For those who prefer a black undercoat, Black Strong & Flexible eliminates the need for black primer, as the material is matte and takes paint readily.
Any space ship models pictured above are from Games Workshop (and are obviously not included).
For more models in 6mm and 15mm scales, check out Anachron Games on Shapeways!
by
coines23
Slow, but heavily armed, the Terran artillery walker provides long-range and indirect fire support on the battlefield.
by
coines23
A rugged, long-ranged ship built to chart the endless frontiers of outer space.
by
coines23
A fast, heavily armed and armored VTOL for ground support missions.
by
coines23
A long-range fire support mecha. This 2-piece model is 2.8cm tall when assembled.
by
coines23
The Jovian Alliance's most common ship of the line
by
coines23
An open framework for large-scale construction and major starship repairs.
by
coines23
The Xuvaxi Protectorate''s police cruiser, loaded with security forces and shuttles.
by
coines23
A heavily armed and armored walker, designed for taking down large, fixed installations.
This 2 piece model is 3.6cm tall when assembled.
This 2 piece model is 3.6cm tall when assembled.
by
coines23
The Jovian Alliance's workhorse, carrying more weapons and fighters than any other ship in the fleet.
by
coines23
A fast cruiser, often used by the Ngaksu in raids and surprise attacks.
by
coines23
A heavy transport ship carrying everything a growing colony needs.
by
coines23
The Xuvaxi Enforcer class battleship is a powerful extension of Xuvaxi diplomacy.
by
coines23
A combination heavy warship and troop transport.
by
coines23
Brave little defender of the Jovian Alliance Navy.
by
admiralducksauce
1:1000 scale starfighter. Reworked to hopefully meet the more stringent wall thickness requirements.
by
coines23
A necessary part of any expedition, the fuel tanker transports reaction mass for the fleet.
by
stonysmith
1:220 Load for a gondola or flat car
by
hdrop
Mech Silver Skull Ring
A highly detailed skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
7 17.3 mm
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Note to the designer" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
A highly detailed skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
7 17.3 mm
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Note to the designer" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
