by
Dotsan
No1 in the series of animal heads, a smaller version of the 570mm high Stag Head (which is not available on Shapeways)
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
by
joabaldwin
I created the skeleton of a skeletal Lepidoptera. The Death's Head Hawkmoth (Acherontia atropos), seen on The Silence of the Lambs , has a skull marking on its back. I made a full human-like bone structure for the moth, with the grinning skull protruding from its back.
The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.
Yes, moths don't have endoskeletons, that's the whole point...
The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.
Yes, moths don't have endoskeletons, that's the whole point...
by
joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
by
Dotsan
No 4 in the series of 3D printed animal heads. An alternative and less literal is Tiger Head 2.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 3 is a Rhino.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Tiger head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 3 is a Rhino.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Tiger head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
by
seedlingdesign
This quirky design by Seedling is inspired by cave stalagmites. The artist imagined what a stalagmite might look like if the mineral layer deposits were made of wildly different colors. The result is this 3D printed sculpture in all it’s psychedelic rainbow brilliance! Printed in a fused gypsum powder, the piece is hollow and has a very cool visual effect when viewed from below. It makes for a beautiful work of art in modern interiors.
by
seedlingdesign
A whimsical play on the concept of ‘fools gold’, this 3D printed sculpture from Seedling is made from a stainless steel core which is then electroplated in real gold. This sculpture is based on fools gold (pyrite) a crystalline form of iron sulphide. If you already collect rocks or minerals, then this piece will be a welcome addition to your collection and a great talking point.
by
neatobjects
This sculptural flower was formed by simulating the biological process that plants use to form their own flower buds, branches and leaf stems.
A version of this 3D print was shown in the Australian Gallery of Design's show Brilliance.
by
Eragatory
this piece is MEN MEDIUM sized
size Men SMALL also available
size Men LARGE also available
Not sure which size you need? Check out my Sizing Chart
An intricate bracelet, revolving around "Memento Mori", which is an artistic theme dating back to antiquity involving morbid symbolism. In this case, covered by digital aesthetics and contemporary production techniques.
The 925 Sterling Silver C-shaped design fits close to the skin. The final product is made using a two-step process. The products are created with a lost-wax casting process using a high-resolution 3D wax printer. After printing the wax model, the wax model is cast in plastic. The wax then melts out and silver is poured in the plaster mold.
Silver is very suitable for this bracelet since it is very strong yet allows some flexibility. If the bracelet would not fit totally according to your wrist you will still be able to make some final adjustments depending on the wanted opening, just as you would do with any other silver jewelry.
size Men SMALL also available
size Men LARGE also available
Not sure which size you need? Check out my Sizing Chart
An intricate bracelet, revolving around "Memento Mori", which is an artistic theme dating back to antiquity involving morbid symbolism. In this case, covered by digital aesthetics and contemporary production techniques.
The 925 Sterling Silver C-shaped design fits close to the skin. The final product is made using a two-step process. The products are created with a lost-wax casting process using a high-resolution 3D wax printer. After printing the wax model, the wax model is cast in plastic. The wax then melts out and silver is poured in the plaster mold.
Silver is very suitable for this bracelet since it is very strong yet allows some flexibility. If the bracelet would not fit totally according to your wrist you will still be able to make some final adjustments depending on the wanted opening, just as you would do with any other silver jewelry.
by
MarmaladePark
A delicate bangle created from a repeating flower. The internal diameter is approximately 6.5 cm.
The coloured version shown here is a white model that I dyed by hand. Buy it here in black or white. If you'd like a custom colour I'd recommend dyeing the white version with Jacquard acid dyes that are suitable for nylon. I also have hand dyed versions at my Esty shop etsy.com/shop/MarmaladePark
by
pyrohmstr
It's hollow...but will be filled with the support material...
