by
QUATRO
Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
by
colleenjordan
Why should your plants stay at home? They help clean the air you breathe, are beautiful, and create a wonderful conversation starter. Carry a sprout, a succulent, or a flower you found on your morning walk.
When buying this wearable planter through Shapeways, your necklace will come unfinished and without a cord. You can add a silver or leather cord of your choice to your necklace, or you can email hello@wearableplanter.com and we will mail you a leather cord for your planter.
by
improbablecog
Resembling a bat or dragon, these biotech earrings are the wings of an alien exoform.
This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick
Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:
- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com
Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)
That's it, otherwise have fun!
This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick
Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:
- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com
Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)
That's it, otherwise have fun!
by
Ammnra
Two Part Ring based on Portal 2 GLaDOS.
SIZE 6
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
SIZE 6
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
by
Ammnra
Two Part Ring based on Portal 2 GLaDOS.
SIZE 6
NOTE: This is just the white "face" part of the ring.
You must also order ”GLaDOS Ring (Black "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
NOTE: This is just the white "face" part of the ring.
You must also order ”GLaDOS Ring (Black "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
improbablecog
10gThough these earrings may resemble an xenomorphic sea creature, we can neither confirm nor deny that they were modeled after any organism living, dead, or bearing any blood relation to our board of directors.
These earrings are sized for 18 gauge piercings and should fit most people with pierced ears. If you need a different size, just ask! I have a few larger gauges already available in the shop, and can resize it to a custom gauge if it's not already there.
Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
by
Ammnra
Ring based on Portal 2 Space Core
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
seannyb
Separated, pre-pinned pieces for easy painting & assembly. Modeled from scratch. I've yet to hold the printed version in my hands, so while on paper the pieces should fit together, I've yet to test the actuality. I also need to asses whether I went too far in hollowing out the pieces. I'll update this listing with photos etc when I do, or make a revision if necessary.
NEW IN VERSION 2: Aperture Science logo stencil provided so that the cube can be built as a standard (non-companion) cube. Cube body is now a single, solid object with totally revised pins. Holes allow it to be be filled with casting resin. $70-$80 less expensive. I AM NOT FAMILIAR WITH HOW WELL THE "STRONG AND FLEXIBLE" MATERIAL WILL WORK WITH THE VERY THIN PIECES IN THIS KIT. Order that material at your own risk and... let me know.
NEW IN VERSION 2: Aperture Science logo stencil provided so that the cube can be built as a standard (non-companion) cube. Cube body is now a single, solid object with totally revised pins. Holes allow it to be be filled with casting resin. $70-$80 less expensive. I AM NOT FAMILIAR WITH HOW WELL THE "STRONG AND FLEXIBLE" MATERIAL WILL WORK WITH THE VERY THIN PIECES IN THIS KIT. Order that material at your own risk and... let me know.
by
Alx9807
Team Fortress 2's Botkiller from Mann vs Machine. This is the best Robot Heavy Botkiller I can make. He is now a necklace for you to wear.
by
eam0315
A remake of the knife that the Spy used in Valve's PC game; Team Fortress 2.
