Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.

Tool, symbol or both?

The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.

I recommend using it with a red leather cord of about 78 cm/ 31 inch.

If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).

The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling. 

Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp

About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.

Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp.  We will send them to you free of charge if you purchase the lamp shade.

love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.

A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring

The Lotus top is a graceful form that embraces the upper body, accentuating the shoulders and clavicles. It's name comes from its unique design that blooms at the center opening, allowing the wearer to put her head through and rest it comfortably on the neck and shoulders.

A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.

Clothoid.A lamp is created by a mathematical curve formula and then that spline is lofted in 3d CAD software. Resulting form is parametric and adjustable in almost infinite number of combinations.

You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece.

This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.

NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com

Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.

The Neverending Story AURYN Medallion. The model is hollowed out on the backside, backside is flat with grooves. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca

Pendant with delicate design of blossom branch.
Specialy designed for silver.
Perfect as a special gift for your beloved one.

If you want Coloured version, head over here : Blossom Heart
Smaller version of the design : Silver Blossom heart Smaller

10g


Though these earrings may resemble an xenomorphic sea creature, we can neither confirm nor deny that they were modeled after any organism living, dead, or bearing any blood relation to our board of directors.

These earrings are sized for 18 gauge piercings and should fit most people with pierced ears. If you need a different size, just ask! I have a few larger gauges already available in the shop, and can resize it to a custom gauge if it's not already there.

Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.

The worst ear plug the internet has to offer. Use this size for gauges up to 1" in diameter. Designed with a slightly raised rim for a snug fit.

To Clarify: These earplugs are sold individually, not in pairs!

If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.

The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.

Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!

For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365

This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and printed in nylon material by Shapeways.com in Holland or New York.

Enjoy watching!

All images are photos of real objects. "Proof Printed".

printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook

Ring inspired by the Omni Tool and Omni Blade from the Mass Effect universe

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.

Painted with 6 thin coats of Orange Transparent Glass Paint (Americana Crystal Gloss Enamels)
Black line painting guide


Thanks for your order and commitment to nerd culture!

Here is an attractive and educationally useful pendant for the scholar, astronomer, steampunk enthusiast, or the lover of the unique and celestial.

The tellurion is a model of how the earth and the moon move in space. You will see that the eath rotates freely on its axis, orbited by the moon. Orbit the whole thing around a candle or lightbulb, and you have a full feldged model of the earth, the moon and the sun.

There is some talk that if you spin the little moon on this pendant around the earth with the right conditions, that you can travel forward and back in time! ;)

ASSEMBLY REQUIRED:

If you want a challenge, order this piece inexpensively here on Shapeways, and assemble it yourself at home. Assembly is not complex, but it does require some careful dexterity and a little strength. Disclaimer: If you order this model here and assemble it yourself, Whystler is not responsible for any damage you may cause to it. If you assemble this piece with care and patience, then you will have a nice piece of jewelry.

Watch for the assembly video. In the meantime, check out the showcase video below!

Ring based on Portal 2 GLaDOS.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Cool android hand that can be used as a paper weight or as an epic desktop item.

3D fractal sculpture / L.E.D candleshade: 'Pointy Shells'. The L.E.D Candle (light source) itself is not included. Shapeways 3D prints this small lightshade designed for an L.E.D candle. Please don't use with real candles. If you would like an L.E.D candle shipped separately from unellenu please contact unellenu(at)unellenu.com (& advise your Shapeways order number for the unellenu candleshade).

Bask in the brilliance of the sequence!

Please use this template to order a customized signet ring. I can add in initials to one of the other symbols you see here, or create a new symbol to your specifications. Please note that the ring and the impression that it makes are mirror images of each other - letters that look right in an impression come from a seal engraved backwards. If you are trying to design your own symbol precisely, please constrain the drawing to an 3/4" diameter circle, and all lines for raised wax should be a minimum of 0.040" wide. This is like drawing with a dull pencil.

Caution: remove signet rings from your hand before using to make an impression. The ring will get hot. Please be careful to avoid burns when using hot wax.

Quality sealing wax is available through our main website.

In some rare instances, Shapeways stainless steel rings have caused a reaction called "tea staining." This is a (not permanent) brown mark on the skin caused by a chemical reaction with the bronze binder. So far only one customer has reported this, and research shows that it depends on skin chemistry - some people always get it, most people never do. Some solutions for people concerned with this are coating the skin contact area with clear nail polish, gold plating, or getting the ring made in silver.

New contest: send in photos of our seals and rings "in the wild" and win free wax if we use them! Showing the product clearly and creativity are strongly encouraged. By submitting photos, you grant Lightbringer Designs LLC the non-exclusive right to use it as we see fit, you will get photo credit. Private message for details.

Custom seals are also available

My 3D printed medium mesh purse (6.3 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a reclosable clasp. See my smaller Small Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap. View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.

---

Want to get a set

(medium purse and 36-inch strap)?

+

---

Want to get a set

(medium purse and 45-inch strap)?

+

---

Product Name "Cat Skull Ring". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 11.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

This is the second and much improved version of my single-piece prybar and nail lifting tool with a range of metric hex drivers (5.5, 6, 7 and 8mm), a bottle opener, a 1/4" hex bit holder and two 1/4" hex driver points.
The centre cut-out will hold and store a standard PH2 or PZ2 25mm long quarter inch hex bit (not included).
Four o-rings are required to complete the assembly (10mm ID, 2.5mm diameter, not included)

This model is designed to be printed in Stainless Steel or one of it's variants.
I've been carrying this prybar around with my keys for a while now and it's functionality is just as i'd hoped with it not having let me down so far.
The prybar can be secured to a keychain or lanyard with a No.2 McGizmo clip or similar 25mm gate clip through the 5.5mm hex hole.

There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.

Designed for the young and seafaring at heart - even if they can't tell their binnacles from their barnacles. Successfully printed in Silver and Gold Plated Glossy. Silver Glossy is unavailable due to the level of smaller details. A number of the photos are of a post processed print with Liver of Sulphur. Your print will arrive as clean metal.

Heart shaped maze pendant. A tricky but wishfull way to heart ;o)

Size 6