Version 4.0

A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.

It comes with 2 cannon/piledriver accessories.

You can also arm the Thugger with either Driller or Slammer accessories!

Radicon thread here.
Flickr gallery here.

Version 1.0

Edit: The world famous Transformers customizer Encline has put up a review of this pair of Optimus Prime's hands! In the video he shows the assembly process, installation, and he finally showcases how well the hands worked, holding weapons and giving various poses! Again, I am very honoured to have my designs reviewed in such an awesome manner. Link is located below!

A pair of hands for ROTF Leader class Optimus Prime! These hands are fully articulated with ball joints on the fingers, thumbs and wrists! Also, they are capable of holding 5mm peg mechtech weapons as well as his original rifle!

Recommended material: Strong Flexible

 Heel attachments for Fansproject's Warbot Defender, to prevent falling from its notorious back-heaviness.

Just added: a photo of an awesome leader Starscream custom using these hands, done by my good friend Encline!

Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!

A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!

Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.

Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.

The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.

Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.

Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)

Version 1.6

A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.

Radicon thread here.
Flickr thread here.

Version 2.0

A pair of posable hands for the Dark of the Moon Leader class Ironhide figure! Each finger is double-jointed, the wrists and thumbs are also ball-jointed, and the hands still fit behind the windscreen in his alt mode!

Not for casual collectors. You will need a dremel and some skill to install these hands.

I recommend these to be printed in Strong Flexible material for maximum reliability.

Radicon thread here. (With installation instructions)
Flickr gallery here.

Version 1.6

A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.

Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.

Printing in Detail material is recommended.

Version 2.0

 Yup, here's my first offering for upgrading your DOTM figures! There has been many awesome customs of Sentinel Prime lately, and you'll only need a couple of expressive, posable fists to make them complete!

Version 3.0

"It's Seismus. The 'S' is silent."

Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.

There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.

Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.

This model is tested in White Strong Flexible.

Flickr gallery here.

TFW2005 thread here.

Version 1.0

In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!

You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!

Version 2.0

A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.

Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.

If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.

This model is tested in Frosted Ultra Detail.

Flickr gallery here.

TFW2005 thread here.

Version 2.0

This mace comes in two parts which you have to order separately from Shapeways. This is part B, consisting of the blades and attack spike. Printing in Transparent Detail or Frosted Ultra Detail is recommended.

Link to Megamace Part A.
Link to MegaFlail Part A.

Version 2.0

This mace comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces and connector. Printing in Strong Flexible is recommended.
Link to Part B.

Version 1.0

A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!

You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!

 A sword designed for Generations Drift. Fits in any 5mm fist hole.

Version 1.5 This blaster is an enlarged version of the one included in the voyager Sentinel Prime weapon set, this time sized to fit the leader class Sentinel Prime figure!

Includes a 3mm c-clip to allow storage on Sentinel's many 3mm railings.

This model is untested.

An accessory set for PCC Heavytread. Includes an articulated mine plow, 3mm post adapter, missile pod, and pistol inspired by G1 Brawl.

This kit reflects Optimus' swords from DOTM and comes with 3 interchangeable hilts: one for leader class Optimus' standard hands, one for Jet Wing Prime's Mech Tech port on his forearms, and one to fit fakebusker83's Optimus Prime hands. Kit tested in WSF. Kit tested in WSF.

This is not intended for children. For adult collectors only.

This is a bull-pup variant on my old Roadbuster riffle. It should hang off the back better than the first. (it come in whatever color you chose)

The cannon peaces from my old Roadbuster kit (it come in whatever color you chose)

The riffle from my old Roadbuster upgrade kit. (it come in whatever color you chose)

Smoke stacks to replace the rubber ones in the Leader Class Optimus Prime figures. Simply remove the rubber ones and insert these.

Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals. I've opened up additional materials, however, please be aware that only WSF has been tested.

his model its just a flipped version of the regular gatling gun i made days ago, not all the transformers figures, have the same aesthetics, so i mirrored it because of that no other changes were made. for more information visist the original version page

Zerg. Mesh fixed, resized

9/26 Once again, Shapeways often cancells models that have already been printed. This model was cancelled today (9/26/12) in WSF Polished, but printed OK twice in WSF in May. It may still print OK i is thin in some areas, but the S in WSF is Strong)n WSF (non-polished) as they may believe the polish would break the model (it Still, yet more incentive to move everything to Sculpteo, i.materialize, ponoko, etc. Shapeways' competitors are improving their storefronts and have always been easier to get a model actually printed.

Golden Disc from Beast Wars.