havarh

by opresco

• 12 faceted die (based on the dodecahedron) • Could be worn as a pendant • Lanyard not included
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

(17)

From: $62.60

Dodclock Die (3 cm)

in Gold Plated Glossy

by opresco

(17)

From: $62.60

LED Candelabra

in White Strong & Flexible

by Whystler

Here is a tower-like candelabra, which has a housing for an LED and coin battery (both supplied by purchaser). While the piece is lovely and interesting on its own, a shade is available, sold separately, in the shop to diffuse the light and provide more character.

Directions for assembly:

When you look at the housing where the coin battery slips in, you will notice that there are three supports that define this space. Two look the same, and one looks a little different. Let's call the one that looks different the "back support".

Get yourself an a standard 5mm LED. Any colour is good - your choice. For the brightest, I would recommend a super bright white or an ultra bright white. But for fun, know that blue and green LED's look very nice with the moon shade if you have bought it also :) Notice that one of the wires coming from the LED is longer. This is the "positive" wire.

Insert the wires of the LED down through the top hole in the candelabra, and wrap the "positive" wire around the "back support" taking care that it is placed so that it will only touch the battery at this place and no other.

Bend the other wire in a such a way that it will touch only the topside of the battery.

Get yourself a 2cm diameter, 3 volt coin battery. The ones I use are described by this code: CR2025. Insert this battery, negative side up, into the LED Candelabra housing.

Your Candelabra should immediately turn on nicely! Note that you can slide the battery slightly away from the back support and this will turn the light out.

If you have purchased the shade, this is very easy to twist on. Simply drop the shade down allowing its slots to slide over the three housing supports. Then twist the shade to secure it fits tightly.

Enjoy!

-Whystler

(5)

From: $18.97

Mariorama Mario

in Full Color Sandstone

by sevensheaven

The classic old school Mario from the NES version of Super Mario Brothers, carefully translated to 3D pixels.

This is a separately orderable part from the Mariorama sculpture, which can also be found in the Sevensheaven 3D Print Store.

(0)

From: $7.30

Rolling Ball Sculpture

in White Strong & Flexible

by swirlingbrain

I've attached a ball to the rolling ball sculpture with the idea that you cut it off and sand it and it should work as the marble. The marble is 5/8 inch so it should work with regular glass or wooden marbles too. Yea it works! See the video!

(6)

From: $11.42

iPhone 4/4S case MacPro

in White Strong & Flexible

by cinemo

iPhone case that makes your iPhone looks like a Mac Pro.
I made this model which mimics the front of a MacPro computer for a friend of mine who is a fan of Apple products, I thought it might interest other geeks around there.
This phone cover has been tested for everyday use, the phone is set up and removed quickly, it fits nicely and all buttons and ports are easily accessible, no need to remove the case to plug the connector.
The model on the pictures was printed with the WSF polished material, I advise to use this material.

(0)

From: $23.31

USB Dust Plug - Leaf

in White Strong & Flexible

by PlainOrb

3D Printed and Tested.

It's used to seal the idling USB ports on your electronic devices, protecting them from dust, coffee / water spill etc. The plug part seals the USB port.

Please note:
USB ports must have 10mm horizontal or 7.5mm vertical clearance, if you want to use multiple plugs.

Specification:
* Made of nylon-12 ( View Material Property )
* Made by Shapeways.
* Worldwide shipping. ( View Shipping Cost )

More Product Photos in the Wild !!

Go to my shop 7Plain
Twitter @7Plain
All Rights Reserved.

(3)

From: $3.12

SHIP IN A BOTTLE

in Transparent Detail

by opresco

«TRANSILVANIA» REMEMBERED
• One of several studies I made in preparation for a monumental project (on a much larger scale) entitled: «TRANSILVANIA REMEMBERED»; the project is about «TRANSILVANIA» (note the Romanian spelling) the quite famous Romanian passenger ship that was in continuous service from just before WW2 up to the end of Ceausescu's era in Romania; I happen to know a very interesting WW2 true story about events aboard this ship that could very easily be the script for a box office hit movie; more details about this project at a later date • The whole assembly comprising of the ANCHOR, with its CHAIN, leading through the bottle's neck to the floating SHIP inside the partially water-filled BOTTLE, were successfully printed together, as "one part", in White Strong and Flexible by Shapeways; the red ship is an identical copy of the one that is inside the bottle; it was printed separately in Terracotta Strong and Flexible to test its floating ability.

(13)

From: $72.77

Desktop Buddies- Robo 01

in White Strong & Flexible

by m_sill

Designed to sit on monitors, desks, books, windows, and anything with a 90* angle! Let this little Robo-01 liven up your work area or dorm room. Chillin' to its own beat, Robo-01 encourages you to relax and turn the volume up. This is the first in a series of Desktop Buddies, please check back every now and then for more characters.

(5)

From: $20.00