by
fx2
You can customize the size (inner diameter) up to 18.2 mm. If you need a bigger one, please do not use this CoCreator but send me a message instead ! I will list it.
Ring on picture is printed in Stainless Steel.
Ring on picture is printed in Stainless Steel.
by
fx2
The pictures show the candle holder printed in Stainless Steel.
*This model won the 2nd price of the 2009 Co-Create Christmas Contest*
Designed to hold a Christmas tree candle.
*This model won the 2nd price of the 2009 Co-Create Christmas Contest*
Designed to hold a Christmas tree candle.
by
fx2
A set includes six sleds. sled size in centimeter : 3,5 X 1,6 X 2
-They can be ordered with a slot to fit a card with the name of your guests
-They can be ordered with a hook to put up the sleighs on the Christmas tree (string not included).
-They can be ordered without any of the two options above to decorate the Christmas table.
You can of course order a combination, by instance 2 sleds with slot, 2 sleds with a hook and 2 sleds without anything.
Preferably to be printed in "Alumide" or "Winter Green/Red/Blue Strong and Flexible"... Could be nice in "Antique Bronze Matt or Glossy", too but would be quite expensive !
-They can be ordered with a slot to fit a card with the name of your guests
-They can be ordered with a hook to put up the sleighs on the Christmas tree (string not included).
-They can be ordered without any of the two options above to decorate the Christmas table.
You can of course order a combination, by instance 2 sleds with slot, 2 sleds with a hook and 2 sleds without anything.
Preferably to be printed in "Alumide" or "Winter Green/Red/Blue Strong and Flexible"... Could be nice in "Antique Bronze Matt or Glossy", too but would be quite expensive !
by
fx2
You can customise this letter opener with your own pattern. Please download the pdf file by copying this link into your browser address bar: http://cid-e6bd7fa5bb9e25d4.skydrive.live.com/self.aspx/.Public/shark^_letter^_opener^_page^_.pdf , print it and create your sketch following the instructions. Upload the scan/photograph of your sketch to Shapeways.
by
fx2
This box is designed to allow an easy customization. The corners and top/bottom frames are 3D printed and can be painted in any color later. The walls can be made in almost every possible material (1,5 to 2,5 mm thickness).
One side can be made in transparent plexiglas, or every sides and anything in between. The cutouts are all rectangular -see image file for dimensions-, thus easy cutting is garanteed.
Sidewalls are not glued, they are simply pinched on every side.
In some rare events, Freeduino and Arduino based installs need a little tweaking until everything works fine: I designed the lid to be easily removable (no screws).
Height of the corners can be customized to fit every shield. Please ask ! Size of the uploaded model is for Seeedstudio Seeeduino without shield.
For now untested – tolerances...
One side can be made in transparent plexiglas, or every sides and anything in between. The cutouts are all rectangular -see image file for dimensions-, thus easy cutting is garanteed.
Sidewalls are not glued, they are simply pinched on every side.
In some rare events, Freeduino and Arduino based installs need a little tweaking until everything works fine: I designed the lid to be easily removable (no screws).
Height of the corners can be customized to fit every shield. Please ask ! Size of the uploaded model is for Seeedstudio Seeeduino without shield.
For now untested – tolerances...
by
fx2
I wanted to create this flexible enclosure prototype which should protect an Arduino board optimally.
The flexible nature of the material has been integrated into design intent from the beginning . Lateral notches have been designed to held some wires. The board itself doesn't need to be screwed into enclosure, there is a snap fit which allows the Arduino to be inserted into the box. The special attachment system can be screwed on a wall, for instance.
I used the downloadable file of an Arduino UNO at http://grabcad.com/library/arduino-uno-reference-design for the renderings.
The flexible nature of the material has been integrated into design intent from the beginning . Lateral notches have been designed to held some wires. The board itself doesn't need to be screwed into enclosure, there is a snap fit which allows the Arduino to be inserted into the box. The special attachment system can be screwed on a wall, for instance.
I used the downloadable file of an Arduino UNO at http://grabcad.com/library/arduino-uno-reference-design for the renderings.
by
fx2
You can personalise your Christmas table tealight by choosing if you want trees, snowflakes or snowmen around the circular cylinder. You can order it without anything,too. In this case only little stars will remain on the cylinder top.
The Christmas table tealight consists of two parts. This item contains only the cylinder. You need to order the base http://www.shapeways.com/model/152033/christmas_table_tealight_2_2.html to get a complete tealight.
This part can only be printed in White Strong & Flexible.
--Currently untested--
The Christmas table tealight consists of two parts. This item contains only the cylinder. You need to order the base http://www.shapeways.com/model/152033/christmas_table_tealight_2_2.html to get a complete tealight.
This part can only be printed in White Strong & Flexible.
--Currently untested--
by
fx2
This candle holder is based on the Snowflake Candle Holder design, but modified to be used with bigger candles. You can choose a diameter between 18 and 26 millimeters.
If you plan to use this candle holder with real candles, I strongly recommend to order the stainless steel version !
If you plan to use this candle holder with real candles, I strongly recommend to order the stainless steel version !
by
fx2
This is the base for a Christmas table tealight.
The Christmas table tealight consists of two parts. This item contains only the base. You need to order the cylinder http://www.shapeways.com/model/152034/christmas_table_tealight_1_2.html to get a complete tealight. I designed this tealight base to be printed in Alumide. Alumide also has a better heat resistance.
-Currently untested-
The Christmas table tealight consists of two parts. This item contains only the base. You need to order the cylinder http://www.shapeways.com/model/152034/christmas_table_tealight_1_2.html to get a complete tealight. I designed this tealight base to be printed in Alumide. Alumide also has a better heat resistance.
-Currently untested-
by
fx2
My entry for "WeekendContest6" :
Recyctabl.picnic is a small picnic table ( well, not one a tall one but rather one which helps to protect the food against non-flying insects...)
This picnic table uses a system of 3D printed corners that are glued to a triangular shaped piece of plywood.
The 3D printed corners are threaded, allowing the bottles to be screwed.
Recyctabl.picnic is a small picnic table ( well, not one a tall one but rather one which helps to protect the food against non-flying insects...)
This picnic table uses a system of 3D printed corners that are glued to a triangular shaped piece of plywood.
The 3D printed corners are threaded, allowing the bottles to be screwed.
by
fx2
Little sun to be placed on the top of your notebook screen. This little sun is always shining, even when it's raining...
