by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
nervoussystem
A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.
It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.
Watch the video below to see the the form was created.
--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
If you purchase directly from Shapeways it will not come with a chain.
by
MichielCornelissen
It's a cute little bird, but there's more to it. Merry Bird is an example of a product that can only be manufactured with 3d-printing technology. ?Take a close look: the bird and its hinged (!) swing are printed right inside the cage - no post-production assembly is necessary.
Originally designed as a Christmas ornament, Merry Bird looks good enough to display all year round.
Merry Bird is also available in design stores worldwide through designlabel Soonsalon; mail Sheila for information on the nearest shop to buy, and wholesale options.
by
BAROBA
An 3d version of one of M.C. Escher's drawings.
by
schreerdesign
(Note, prices reduced) This is a sound magnifier for your iPhone 4 or 4s (does not fit others), based on the old Gramophones of the late 19th and early 20th Centuries. NOTE: BASE AND HORN ARE NOW SOLD SEPARATELY FOR TECHNICAL REASON. THIS FILE IS THE BASE ONLY. SEE THIS LINK FOR THE HORN: http://shpws.me/5i0B . (Adding this to cart will add both)
+ 
Want to get a set?
+ 
by
curvecreative
Bugle for iPhone 4 / 4S
Enjoy your music louder with the Bugle
The Bugle is a natural acoustic amplifier for your iPhone that fits snuggly over the speaker, acts as a stand and makes your music sound better and louder. The Bugle is curved to provide a natural flex that assures a snug fit on your iPhone.
A great solution for bringing anywhere and requires no batteries. Just chuck it in your bag and use it for music at the park, for watching a film, or for sharing a youtube video
iPhone 5 version available here
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Large is approximately life-size. See pic of all 3 sizes together for comparison.
by
RemivanOers
CLIP-IT for iPhone -US edition-
Your charge buddy on the go.
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock it by clipping it to your charger. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it US is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (US version).
The European version of Clip-it is available here.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
Your charge buddy on the go.
Clip-it for iPhone converts your iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock it by clipping it to your charger. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it US is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (US version).
The European version of Clip-it is available here.
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
by
nulogia
please email us at nulogia@gmail.com with your shipping information so that we can ship your lens to you for free !
by
MaxiOli
This is an extension for the mini ES 2x2x2 puzzle
YOU NEED 8 PCS OF THIS to complete the "6 corners of the world" puzzle.
It was first showed at the following Twisty Puzzles Forum topic:
http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19866
For the stickers, you need to contact me at: rubikkocka@gmail.com
YOU NEED 8 PCS OF THIS to complete the "6 corners of the world" puzzle.
It was first showed at the following Twisty Puzzles Forum topic:
http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19866
For the stickers, you need to contact me at: rubikkocka@gmail.com
by
TomZ
The Dino Skewb is a combination of two famous puzzles, the Dino Cube and the Skewb. The Dino Skewb's mechanism is based on my Tetrahedral Twins (also available from my shop).
This is, to my knowledge, the first ever Dino Skewb. It looks exactly like a Lattice Cube (Master Dino), but it is quite different. A Lattice Cube turns like a Dino Cube with turning tips.
My Dino Skewb does not have those turning tips but, contrary to the Lattice Cube, it does have the deep cut of a Skewb. The turning on the Skewb cuts is great, the Dino cuts have a little click to them because I needed the pieces to overlap a little to prevent gaps from appearing. I choose aesthetics over functionality in this case. But it isn't bad at all. The puzzle can be a little squishy at times, but overall I'm very pleased with the result.
This item is for a DIY kit only - it only contains the plastic 3D printed pieces, you will need to supply your own M3 springs/screws to assemble this puzzle and also supply your own stickers (available from Dr. Sticker). Alternatively, you can order fully assembled and stickered puzzles from me at tom@tomvanderzanden.nl.
This is, to my knowledge, the first ever Dino Skewb. It looks exactly like a Lattice Cube (Master Dino), but it is quite different. A Lattice Cube turns like a Dino Cube with turning tips.
My Dino Skewb does not have those turning tips but, contrary to the Lattice Cube, it does have the deep cut of a Skewb. The turning on the Skewb cuts is great, the Dino cuts have a little click to them because I needed the pieces to overlap a little to prevent gaps from appearing. I choose aesthetics over functionality in this case. But it isn't bad at all. The puzzle can be a little squishy at times, but overall I'm very pleased with the result.
This item is for a DIY kit only - it only contains the plastic 3D printed pieces, you will need to supply your own M3 springs/screws to assemble this puzzle and also supply your own stickers (available from Dr. Sticker). Alternatively, you can order fully assembled and stickered puzzles from me at tom@tomvanderzanden.nl.
by
SteveMarshall
This puzzle consists of a 2x2x2 twisty puzzle on the inside, and a burr puzzle outer shell. The inner 2x2x2 is only solved when the outer shell pieces fit around it. The shell pieces can also be solved separately, so this is two puzzles in one!
The pieces fit nicely straight out of the box- tight enough to stay in, but loose enough to get out easily! It's based on a mini Eastsheen 2x2x2, which you can buy here- you will need to glue the pieces you receive from Shapeways on to one.
Please contact me to purchase one pre-assembled.
The pieces fit nicely straight out of the box- tight enough to stay in, but loose enough to get out easily! It's based on a mini Eastsheen 2x2x2, which you can buy here- you will need to glue the pieces you receive from Shapeways on to one.
Please contact me to purchase one pre-assembled.
