by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
Gijs
Do you want to order more than 1 in a single color? Check out this set of 2, or this set of 4 to save some money
This eggcup is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
This eggcup is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
by
OneSaveSolutions
This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design.
It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.
by
LincolnK
These filigree earrings look delicate almost like lace, yet are flexible and very resilient and should last you a life time assuming a monkey doesn't eat them. They are so light that you wouldn't even know you are wearing them.
Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.
Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.
by
jaylen
A flower-shaped tea-light holder. Suited for approx. 4cm diameter tea-lights.
UPDATE 11 November 2012: Thicker walls - Should now work with polished and dyed Strong&Flexible
UPDATE 11 November 2012: Thicker walls - Should now work with polished and dyed Strong&Flexible
by
virtox
A pair of dangly Triple Matrix earrings.
A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.
When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!
More earrings
A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.
When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!
More earrings
by
rinblad
An ornament in the shape of a tree, with some of the roots creating a garland around it. This ornament can stand on a surface or be hung in a window, in a tree or on a door. The branches produce a beautiful pattern regardless of which angle you view it in. All the lines is flowing and come together in harmony.
Please note that the "White Strong & Flexible" material will turn yellowish if you leave it in the sun. If you're going to hang it in a window, make sure it faces the side of the building with most shadow.
by
rustylab
"Peep" is a series of pendants. The parts are designed to be fully movable. It makes a great gift to yourself or to someone you really like or love.
***The chain is not included in the delivery.
by
froland
Giraffe with partially open body through a Voronoi structure.
The body hosts two balls with a Voronoi structure, one inside the other.
Want to know more about Voronoi?
Voronoi on Wikipedia
See the shop for other Voronoi inspired models and jewlery.
The body hosts two balls with a Voronoi structure, one inside the other.
Want to know more about Voronoi?
Voronoi on Wikipedia
See the shop for other Voronoi inspired models and jewlery.
by
japhyr
Heart Dipping Dish
This is a dish for dipping bread in olive oil. Fill the dish with enough olive oil to cover the heart, and then add balsamic vinegar to the heart. The vinegar will sink to the bottom and fill out the heart! You might need to push the vinegar around with a toothpick to fill out the heart really cleanly, but it is easy to do, and continues to look nice even after you start dipping bread.
This is a dish for dipping bread in olive oil. Fill the dish with enough olive oil to cover the heart, and then add balsamic vinegar to the heart. The vinegar will sink to the bottom and fill out the heart! You might need to push the vinegar around with a toothpick to fill out the heart really cleanly, but it is easy to do, and continues to look nice even after you start dipping bread.
by
virtox
A playful vase or flower pot.
Designed for Glazed Ceramics.
Made from a four generation binary tree,
with a two generation cavity.
This should allow full inside glazing.
It has not been printed yet, but I do not expect much trouble with this one.
Also available as a free download:
Binary Roots by Virtox is licensed under the Creative Commons Attribution - Non-Commercial - No Derivatives license.
Designed for Glazed Ceramics.
Made from a four generation binary tree,
with a two generation cavity.
This should allow full inside glazing.
It has not been printed yet, but I do not expect much trouble with this one.
Also available as a free download:
Binary Roots by Virtox is licensed under the Creative Commons Attribution - Non-Commercial - No Derivatives license.
by
stop4stuff
Chained Die - D6 - chains and rings make up the construction of this D6 die
by
stop4stuff
Square Maille FlatN earrings (pair)
A unique pair of earrings in my FlatN style Squaremaille (chain maille). Each earring is the mirror of the other, so they hang as opposites.
Available in White Strong and Flexible or any of Shapeways seasonal dyed stong & flexible colours.
Can be coloured using acid dyes or dilute artists acrylic paint.
Free earring hooks included.
A unique pair of earrings in my FlatN style Squaremaille (chain maille). Each earring is the mirror of the other, so they hang as opposites.
Available in White Strong and Flexible or any of Shapeways seasonal dyed stong & flexible colours.
Can be coloured using acid dyes or dilute artists acrylic paint.
Free earring hooks included.
by
BanluKemiyatorn
Characters can be changed to initials.
by
christopherlowe
organically shaped, this bowl was created to be made out of the new glazed ceramic.
