duann

I spread the Shapeways love.....

Expertise:

  • 3D modeler
  • Designer
  • Product designer
  • Artist
  • Maker
  • Lots
by JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
 
(42)  
  •  
From: $95.00
 
by JoshuaHarker
Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.
 
(19)  
  •  
From: $50.00
 
by joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(

All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.

It's a great piece to have on your desk, or to hang from a string to let it spin around.
 
(19)  
  •  
From: $24.00
 
by TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]

Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!

The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.

The 3D printed Strandbeest is sold separately.

A few tips to consider:

- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.

- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
 
(40)  
  •  
From: $39.87
 
by nervoussystem
 This 2in wide cuff is truly a bold accessory! It features a flexible C-shaped design that fits closely against the wrist. It was grown from 4 separate root points which gradually intertwined into a single network.

watch the video to see how it was created!

Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

 
(5)  
  •  
From: $75.00
 
by ryankittleson
Show off your success (or someone else's) with this perfectly re-created sculpture based off the popular meme.
 
(11)  
  •  
From: $12.99
 
by jbobrow
Since the response has been so great. I am raising funds on Kickstarter to offer a more refined product with nickel plating and milled from steel. Click here to support my Kickstarter

Even if you would like to order the 3D printed version here, please consider backing the Kickstarter to help me launch the product more affordably and with greater fidelity.

Have a new MacBook? Here's a little tool to help you keep a MagSafe adapter on you at all times :) And here is a link to the converter just in case, Apple Store MagSafe Converter
 
(7)  
  •  
From: $15.00
 
by MarcoA
My case for Raspberry Pi computer. To be assembled with the "LED lightguide" model nr. 486757 (http://shpws.me/6yFP). This is the case everyone is talking about! ;) Features: snap-fit fixing system for the board, easy to mount/unmount; snap-fit closing system, no screw required; bottom holes for blocking the computer by screws (sliding mount); led lightguides (not included in this model, available here: http://shpws.me/6yFP ); pre-shaped hole for GPIO access, just cut it out to open. In this page you can find a gallery of shots working cases by enthusiast users! http://marcoalici.wordpress.com/raspberry-pi-case-gallery/
 
(51)  
  •  
From: $38.60
 
by Bathsheba
A theorem walks into a bar...
The Klein Bottle is a mathematical joke: a surface with only one side. This one feels just right in your hand and opens bottles with ease and style. Built to last in steel, it's the perfect touch for any math fan's kitchen.

Yes, it really works!

Klein not-a-bottle-opener is here.

 
(24)  
  •  
From: $78.00
 
by VENERIDESIGN
Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed  piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com  for shipping address.
Thank you.


 
(56)  
  •  
From: $1,388.66
 
by MichielCornelissen
Both a tribute to ubiquitous, and lovely, hexagonal colour pencils, and a representation of what was coined by Joris Peels as 'combinatory manufacturing'.

Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.

Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.

If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.

 
(69)  
  •  
From: $53.61
 
by nervoussystem
The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling. 

Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp

About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.

Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp.  We will send them to you free of charge if you purchase the lamp shade.

 
(54)  
  •  
From: $500.00
 
by joabaldwin
I created the skeleton of a skeletal Lepidoptera. The Death's Head Hawkmoth (Acherontia atropos), seen on The Silence of the Lambs , has a skull marking on its back. I made a full human-like bone structure for the moth, with the grinning skull protruding from its back.

The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.

Yes, moths don't have endoskeletons, that's the whole point...
 
(18)  
  •  
From: $15.00
 
by MichielCornelissen
The Wrap is an accessory that attaches to the USB end of your iPhone charger, transforming it into a handy little cable winder for the charging cord.

This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.

This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.

You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.

A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
 
(10)  
  •  
From: $10.00
 
by geraldesign
 
(16)  
  •  
From: $11.36
 
by jes1111
This is the bottom part of the OpenPilot CopterControl CC3D case. You also need the top part (CC3DCase upper) and (optionally) the base clip (Case base 1 v1). Note that this case is for the CC3D only. The base clip is common to both CC and CC3D versions.

More info here: http://wiki.openpilot.org/display/Doc/CopterControl+case and http://wiki.openpilot.org/display/Doc/CC3D+Case

CC3D complete set?

+ +




 
(2)  
  •  
From: $6.27
 
by Egant
When is the last time there has been an innovation in buttons? Answer, just now! This button not only holds your shirt together, but it also holds the cord for your ear buds and helps to keep them in your ears. Works for apple ear buds, and any cords with a 2 mm diameter.
 
(8)  
  •  
Not For Sale
 
by FreakyShape
Case compatible with the Raspberry Pi computer. GPIO port access from the side of the case. Optionnal : led lightguides for design case V2. http://www.shapeways.com/model/576641/raspberry-pi-led-lightguides-for-design-case-v2.html More information on : http://freakyshape.com/portfolio/raspberry-pi-design-case-v2/
 
(9)  
  •  
From: $32.07
 
by henryseg

A smaller version of Triple Gear is available here. A baseplate and axle for using a motor to move the triple gear is available here. Also see 15 cm axle for Triple gear and 30 cm axle for Triple gear.

In this unusual mechanism three gears mesh together in pairs, and yet they can turn!

If you take three ordinary gears and put them together so that each gear meshes with the other two, then none of the gears can turn because neighbouring gears must turn in opposite directions. Triple gear avoids this problem by having the three "gears" arranged like linked rings - the gears then rotate along skew axes, and the opposite direction rule no longer applies (although see also Oskar van Deventer's Magic Gears for another possible solution).

This is joint work with Saul Schleimer. We were inspired by another of Oskar's designs, his Knotted Gear, which consists of two linked rings that gear with each other, and of course we wondered if it would be possible to do three linked rings!

Here is a paper on the mathematics behind the Triple gear, and how we designed it.

A note on materials: I have so far printed it in White Strong & Flexible only. It may arrive with the rings slightly fused together, but gently moving them back and forth will loosen them up, and the mechanism gets smoother with use. I'm not sure what effect the polishing process would have on the gearing mechanism, since it would polish the exposed gear teeth but not those which are meshed as it comes out of the printer. So I have disabled the polished material options. If you really want to try it, let me know. I also haven't tested any of the "frosted detail" materials, but I imagine that they should work fine. It isn't printable in the other "detail" materials because of cleaning problems.

 
(6)  
  •  
From: $40.00
 
by MichielCornelissen
CableGuy is currently not available through the Shapeways site. My new product The Wrap, a handy cable winder for the European iPhone charger, can be found here.

CableGuy - cable winder and clip for Apple earphones

Many of us are familiar with two little issues related to the earphones we use with our iPhones and iPods. First, what do you do with ‘m when you’re not using them; and second, where do they go when you take out your buds for a few seconds.

CableGuy solves both of these problems for the Apple earphones that our iGadgets come with. The earbuds and plug find a home in the slots in CableGuy, while the cable can be wound neatly (or not so neatly, if you prefer) around it - making cable spaghetti a thing of the past.

But that’s not all. Clip it to your t-shirt, shirt pocket or bag, and CableGuy keeps your earphones from dropping to the floor when you’re on pause, using either the build-in cable clip or the earbud-fitting slots.
 
(31)  
  •  
Not For Sale
 
by barbecuesteve
This adapter holds your Apple "MagSafe to MagSafe 2 Adapter" snugly and hooks to your power adapter's cord. For that power adapter that is used to serve both old and new Macs!
 
(3)  
  •  
From: $4.00
 
by 90grad@gmx.ch
Ring in the form of an octopus.
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us
 
(6)  
  •  
From: $12.34
 
by kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
 
(5)  
  •  
From: $13.00
 
by TheoJansen
[Note: The seperate propeller does not fit the Ondula version! We are working on a propeller for the Ondula]

Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.

Currently there is no propellor available for this version, it is being worked on though!

In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
 
(9)  
  •  
From: $106.83
 
by tomrust
NEW! All in one integrated power pack for iPhone5. Order the KIT version here through Shapeways OR order completely assembled versions through our website at www.custompowersolar.com. Simple: Just slide your phone into the charger - it immediately starts charging your phone, plus you're free to continue using your phone while its charging without dangling wires to an external charger. When done, just grab the top of your phone and pull it out! No extra pieces to snap in, charger hold phone firmly in place while charging. Case holds iPhone, extended life 5000mah battery, and electronics to extend operating time an additional 3X. Includes electronics, replaceable battery and external rapid charger. iPhone 5 slips into top of case, and the charger and battery are hidden behind phone. Solar module option re-charges anywhere in full sun. Easy to carry solution for extending iPhone 5 battery life. White and black in stock. Kit version includes battery & electronics with self-adhesive backings that incorporate into case. Some assembly required, assembles in seconds. No tools required.
IMPORTANT! MUST fill out shipping address in order to have battery & electronics sent to you. Go to www.custompowersolar.com/contacts.htm Copy & paste link to your browser. Weight 138g
 
(7)  
  •  
From: $144.60
 
by neuralfirings
Model was sculpted using Blender, a free and open source 3D Modeling/Animation/Game Engine. Find out more at http://blender.org
 
(4)  
  •  
From: $30.00
 
by cunicode
one cup a day
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics

View the collection

new: available in Black Ceramics
 
(37)  
  •  
From: $56.38
 
by ryankittleson
Based on the famous painting that's used to make antiquated versions of rap lyrics.
 
(5)  
  •  
From: $24.99
 
by joabaldwin
A compound mobius strip created out of 36 interlocking mobius strips.

All segments are thin mobius strips, and they weave and interlock perfectly through the spaces left between them. Highly complex, and a headache to look at, yet it possesses an inherent mathematical simplicity and beauty.

This model is 3d printed out of a sintered vinyl plastic, which makes it very resilient and bendable. It won't break if you drop it.
 
(2)  
  •  
From: $27.00
 
by curvecreative

Bugle for iPhone 4 / 4S

Enjoy your music louder with the Bugle

The Bugle is a natural acoustic amplifier for your iPhone that fits snuggly over the speaker, acts as a stand and makes your music sound better and louder. The Bugle is curved to provide a natural flex that assures a snug fit on your iPhone.

A great solution for bringing anywhere and requires no batteries. Just chuck it in your bag and use it for music at the park, for watching a film, or for sharing a youtube video

iPhone 5 version available here

 
(2)  
  •  
From: $19.99
 
by cwestbrook
Please read the entire listing. Thank you!

Steampunk your iPhone with a cog / gear puzzle style design inspired by the inner workings of the mechanical. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.

If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.

Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).

This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)

Click through the photos to see your color options.

The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!

*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*

Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.

I designed it for easy access to all buttons, ports and controls.

The colors available are what Shapeways currently offers.

*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.

*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.

*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.



To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

 
(10)  
  •  
From: $55.00
 
by tomorrowlab

Solo e Sola is an espresso cup that holds a single cigarette.


The Solo e Sola cup was inspired out of need, and could be used to build an entire business model... imagine a food truck offering single espresso shots with single cigarettes. Currently illegal, probably unhealthy, yet understandably desirable, Solo e Sola is a serving piece for a food truck, a cafe or a restaurant, or individuals.


A product of Tomorrow Lab’s CoBuilt process [ http://tomorrow-lab.com/cobuilt ], this cup was developed for a low cost using rapid fabrication processes including an inhouse MakerBot and Shapeways.com.

 
(3)  
  •  
From: $59.99
 
by joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.

All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.

-- Kosher. Vegan friendly. --

Disclaimer for idiots: Don't eat it.
 
(7)  
  •  
From: $19.00
 
by bitstoatoms
Replacement part for inside hub of Bugaboo Chameleon Stroller.

3D print in stainless steel for maximum strength. You will most likely need 2 for each side of the each side of the stroller that is broken.

Check out Instructables for a step by guide how to repair your Bugaboo with Shapeways 3D printing.

This is not an official Bugaboo part, nor has it been endorsed by Bugaboo in any way.
There are no waranties of how this it wlll work it is simly a solution that worked really well for me that I wanted to share.

 
(5)  
  •  
From: $15.88
 
by LincolnK
Have you ever experienced such a great love for someone that it felt as if your heart was going to burst through your chest? It can even feel as if your entire rib-cage is now filled with your heart.
Inspired by my own experience of falling in love, this is a true artistic expression of a deep and pure love.

Makes a meaningful gift for yourself or that very special loved one.

(Pictured with a necklace. Price is for pendant only)

Featured at multiple design shows including Dutch Design Week, Maker Faire, World Maker Faire, SIGGRAPH, and more!

A smaller version is available both as earrings and as a pendant.
 
(36)  
  •  
From: $200.00