by
joabaldwin
This is a mobius strip of Level 1 or Super Mario Bros. The whole level is wrapped around itself in a single surface, and poor Mario begins and ends at the same spot every time :(
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
All the elements from the level are there: every mushroom, turtle, cloud and star. They are all carved out of the surface at different heights, which looks fantastic when you have a light coming from the side, and each block casts a shadow.
It's a great piece to have on your desk, or to hang from a string to let it spin around.
by
fakebusker83
Version 4.0
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
by
process
Heel attachments for Fansproject's Warbot Defender, to prevent falling from its notorious back-heaviness.
by
fakebusker83
Version 1.6
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
by
fakebusker83
Version 4.5: Edited for peg locks to be sturdier.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
by
fakebusker83
Version 1.5
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
A 5-pack of the hungriest pestilence found in the universe! Each scrapacius has a hinged jaw and ball-jointed neck joint. The legs are designed to grab onto 3mm diameter rods. Enjoys cuddling.
Each Scrapacius stands about 2cm tall.
This design is successfully tested in FUD and WSF. FUD is recommended to capture all the fine detail.
TFW2005 Radicon thread here.
by
fakebusker83
Version 1.5
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
by
fakebusker83
Version 2.0
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
by
lorddragonmaster
Version 4
This is a completely show accurate weapon for TF: Prime Voyager Optimus Prime. This is the legendary Star Saber, featured in season 2 of TF:Prime. Weild the power of the Primes with a weapon that towers over Optimus himself!
The sword and handle separate and will fit into the 5mm hands of any Transformer.
The blade measures 186 mm in length and is an imposing sight for any Decepticon.
This model has been successfully tested in WSF and FUD!
Please note the sword does not come in colour/or painted.
by
fakebusker83
Version 1.6
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
by
fakebusker83
Version 2.5
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
by
fakebusker83
Version 3.0
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
A fusion cannon and blade replacement for the TF: Prime Powerizer Megatron figure! This set includes a fusion cannon and an forearm armour attachment with a fold-out blade.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
by
fakebusker83
Version 1.5
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
by
fakebusker83
Version 2.0: Handle is shaped to a straight cylinder for better grip.
This is the hilt section of the Deicidium blade, consisting of the handle piece and pommel attachment. Includes an auxiliary peg on the side for storage.
The handle is 5mm peg compatible.
Printing in Black Strong Flexible is recommended.
Click here for Part B (136mm long blade).
Click here for Part B (110mm long blade).
Version 2.0 is tested in Black Strong Flexible and Frosted Ultra Detail.
You might also be interested in getting the Desecrated Vambrace.
This is the hilt section of the Deicidium blade, consisting of the handle piece and pommel attachment. Includes an auxiliary peg on the side for storage.
The handle is 5mm peg compatible.
Printing in Black Strong Flexible is recommended.
Click here for Part B (136mm long blade).
Click here for Part B (110mm long blade).
Version 2.0 is tested in Black Strong Flexible and Frosted Ultra Detail.
You might also be interested in getting the Desecrated Vambrace.
by
fakebusker83
Version 1.0
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
by
fakebusker83
Version 1.0
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
by
fakebusker83
Version 2.0
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
by
Redshift
Both Targetmasters together, one with a double-barreled shotgun and the other with a chainsaw
They look nice in both WSF and Black Detail, although the detail material will need a little sanding on the ball joints(and maybe a little warming of the plastic) to connect the parts. The 5mm pegs work quite well in a huge range of Transformers brand figures.
They look nice in both WSF and Black Detail, although the detail material will need a little sanding on the ball joints(and maybe a little warming of the plastic) to connect the parts. The 5mm pegs work quite well in a huge range of Transformers brand figures.
by
fakebusker83
Version 2.0
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
by
fakebusker83
Version 1.0
This is the "Mitmitie" variant of the Dejector model. It is a extremely posable, 2 inch tall robot and it comes with 2 detachable blaster accessories which he can grasp in his hands. He can hold other compatible 3mm peg accessories as well.
By some odd quirk, he can fold up into a rough, disc-like shape...
This model has been successfully tested in Strong Flexible and Frosted Ultra Detail. Due to fragility issues with FUD, Strong Flexible material is recommended.
Radicon thread here.
Flickr gallery here.
This is the "Mitmitie" variant of the Dejector model. It is a extremely posable, 2 inch tall robot and it comes with 2 detachable blaster accessories which he can grasp in his hands. He can hold other compatible 3mm peg accessories as well.
By some odd quirk, he can fold up into a rough, disc-like shape...
This model has been successfully tested in Strong Flexible and Frosted Ultra Detail. Due to fragility issues with FUD, Strong Flexible material is recommended.
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.0
This is the 136 mm long blade version of the Deicidium sword. It brings the total sword length to 190 mm.
Printing in Transparent Detail or Frosted Ultra Detail is recommended.
Click here for Part A.
This model is successfully tested in Violet Purple Strong Flexible and Frosted Ultra Detail.
This is the 136 mm long blade version of the Deicidium sword. It brings the total sword length to 190 mm.
Printing in Transparent Detail or Frosted Ultra Detail is recommended.
Click here for Part A.
This model is successfully tested in Violet Purple Strong Flexible and Frosted Ultra Detail.
by
fakebusker83
Version 2.0
The Sonic Spike Projector is a weapon accessory that can be used as a heavy pistol or extended in length to form a kick ass rifle! It uses the 5mm peg system for handles and ports and is compatible with many different figures.
Putting the Projector together is a simple matter of twisting and sliding in both outer shells onto the central core and attaching the spike projectile on the front.
This accessory is designed as a counterpart to the shoulder cannon that comes with Fall of Cybertron Voyager Soundwave, and scales nicely with that figure.
Standard length is 95 mm long, extended length is 108 mm.
Version 1.0 has been tested in White Strong Flexible. Version 2.0 has not been tested yet.
The Sonic Spike Projector is a weapon accessory that can be used as a heavy pistol or extended in length to form a kick ass rifle! It uses the 5mm peg system for handles and ports and is compatible with many different figures.
Putting the Projector together is a simple matter of twisting and sliding in both outer shells onto the central core and attaching the spike projectile on the front.
This accessory is designed as a counterpart to the shoulder cannon that comes with Fall of Cybertron Voyager Soundwave, and scales nicely with that figure.
Standard length is 95 mm long, extended length is 108 mm.
Version 1.0 has been tested in White Strong Flexible. Version 2.0 has not been tested yet.
by
fakebusker83
Version 1.6
This is the Thugmeister, a tiny humanoid robot that stands about 2 inches tall. He is sturdy and very posable. His fists can hold 3mm peg compatible accessories and he comes with 2 hand blaster weapons.
By some odd quirk, he can fold up into a rough, disc-like shape...
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Click here for "Fierier" variant Thugmeister.
Click here for the Thugmeister KaBlammers.
Radicon thread here.
Flickr gallery here.
This is the Thugmeister, a tiny humanoid robot that stands about 2 inches tall. He is sturdy and very posable. His fists can hold 3mm peg compatible accessories and he comes with 2 hand blaster weapons.
By some odd quirk, he can fold up into a rough, disc-like shape...
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Click here for "Fierier" variant Thugmeister.
Click here for the Thugmeister KaBlammers.
Radicon thread here.
Flickr gallery here.
by
TreadshotA1
"When you need proof that big things do actually come in small packages, you call Cartridge Robot Beast. The heavy-hitter of the Cartridge Robots, twin shoulder-mounted cannons augment Beast's powerful physique. Whether he's blasting away at foes from a distance, or up close smashing your face in, Beast is all about hitting hard every time.
Of course, a diminutive stature does have its drawbacks. Beast isn't too quick on his feet, and distance running isn't what he was built for. Thankfully, he can quickly fold up into Cartridge mode for Soundwave to take him wherever he needs to be."
-
Cartridge Robot Beast is a transformable robot gorilla, designed for use with the Cybertron Soundwave/Universe Blaster figures. Beast transforms from a gorilla with 14 points of articulation to a cartridge form which stows inside the chest of Soundwave/Blaster. Included with Beast are two shoulder mounted cannons for added firepower.-
Beast is recommended to be printed in any of the Strong and Flexible materials, or Frosted Detail/Frosted Ultra Detail.
by
Tom.B
--Blockhead's guns are here: http://www.shapeways.com/model/618627/blockhead-s-guns.html ---A custom legion class size figure. A little off-road a little muscle-car, Block head my not be the smartest bot around but there's no one better suited to get the word out to troops in remote locations.
by
TreadshotA1
Customs Blasters for TFP Arcee (First Edition).
Blasters attach over forearms in robot mode, and can be attached in bike mode.
by
fakebusker83
Version 2.0
A pair of show accurate blasters for TF: Prime RID deluxe Arcee! These blasters are held by 5mm pegs, and they also have side peg holes for them to be mounted on the side of her bike mode!
This set is for those who have already owned the previously released "Spider Stinger" blades, and wanted just the blasters.
Version 1.0 is tested in White Strong Flexible. The current version 2.0 is untested.
Buyer beware.
A pair of show accurate blasters for TF: Prime RID deluxe Arcee! These blasters are held by 5mm pegs, and they also have side peg holes for them to be mounted on the side of her bike mode!
This set is for those who have already owned the previously released "Spider Stinger" blades, and wanted just the blasters.
Version 1.0 is tested in White Strong Flexible. The current version 2.0 is untested.
Buyer beware.
by
Drawn-SteelHero
Powerful hand-held thermal cannon converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any of which can be glued in to the mounting point on the figure's back.
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.
This new version of the Dustup figure has more open hands, which allow it to hold or clip onto any 3mm diameter rod.
It also has a new hnge design which allow it to be printed in the Detail materials as well as WSF. However, WSF Polished is recommended for the best combination of durability and smoothness.
Supplied as a 17-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions and photos coming soon...
Gun mode comes with a choice of three handles, any of which can be glued in to the mounting point on the figure's back.
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.
This new version of the Dustup figure has more open hands, which allow it to hold or clip onto any 3mm diameter rod.
It also has a new hnge design which allow it to be printed in the Detail materials as well as WSF. However, WSF Polished is recommended for the best combination of durability and smoothness.
Supplied as a 17-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions and photos coming soon...
by
Tom.B
---Before purchasing please understand this kit will take a lot of time and patients to assemble. It will require a great deal of sanding and fitting, its a beast---Version 2.0, the tripod has been removed, it was useless---
The name might be farfetched, but this cannon is too. A massive heavy weapon for your DX and Voyager sized figures. When the reactor shields are opened the centrifuge can spin on a axle.
by
fakebusker83
Version 1.5
This is a replacement for the tailfin assembly from FOC deluxe Starscream, featuring 2 movable fins on swivel joints. This allows the fins to be adjusted for different looks in jet mode, as well as fold flat against Starscream's back in bot mode.
This model has been successfully tested in White, Strong and Flexible. With some modification and the use of thin wire, Frosted Ultra Detail and Detail material can also be used.
This is a replacement for the tailfin assembly from FOC deluxe Starscream, featuring 2 movable fins on swivel joints. This allows the fins to be adjusted for different looks in jet mode, as well as fold flat against Starscream's back in bot mode.
This model has been successfully tested in White, Strong and Flexible. With some modification and the use of thin wire, Frosted Ultra Detail and Detail material can also be used.
by
TecromDesigns
Above is a picture of the Tempest blaster, printed in the "Frosted Ultra Detail" material from Shapeways and an artist's paint application on the model. The Blasters have a 5mm peg/grip which should allow most figures that utilize this grip measurement to securely hold the model. In addition, I've included an image of RID Transformers Prime Arcee with a Tempest head add-on it (sold separately) to illustrate how a figure might hold the model. Note the set you will receive if purchased will includes "a pair" of Tempest blasters, however the pictures above depict only one blaster.
by
lorddragonmaster
Whether you are unlocking a cyberforming omega device, or just wanting to play hide and go seek the relic, the Omega Keys are for you! These handy keys are great for keeping both Autobots and Decepticons distracted, as they search for a means of restoring their war torn home, or transforming yours! You can also store them in extra any Iacon canisters, Elite Guard trainees, or old socks for safe keeping.
Yes these little suckers do it all! (Except for plugging into transformers to allow additional weapons to pop out. That’s just ridiculous.)
Each knock off…er I mean…totally authentic original, comes in a set of 4.
Get them before your enemies do!
(Does not include Omega lock)
(Do not trade to Decepticons in exchange for Children)
This product has been successfully tested in WSF
