by
Bathsheba
A pendant for metal printing. I have trouble believing that these are photos and not renders...something about this object feels very unlikely.
by
shengchiehchang
Protective and decorative case for Iphone 4 / 4s.
It is a monocoque with double layered "brain cell" structures.
NEW pattern updated! April 2013.
For iPhone 5, please go to this page
NEW pattern updated! April 2013.
For iPhone 5, please go to this page
by
Bathsheba
A pendant for metal printing. I think this may be the most adorable thing ever.
by
nervoussystem
A striking cellular cuff inspired by microscopic cellular structures and created using computer simulation and 3d-printing.
this bracelet is size MEDIUM
also available in size LARGE
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
this bracelet is size MEDIUM
also available in size LARGE
The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.
It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.
--
this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
by
harryapeman
This is a new version of the Hand- Heart sculpture. It includes loops that make for easy attachment of a necklace chain!
*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains
*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains
by
virtox
Phamora Ceramics!
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
by
jasolo
Earring with a head similar to Escher's works such as Bond of Union and Head in Clouds.
This model contains only one earring. To get the pair put a quantity of 2 in the shopping cart.
Not available in Detail material because of lack of rigidity.
This model contains only one earring. To get the pair put a quantity of 2 in the shopping cart.
Not available in Detail material because of lack of rigidity.
by
daddymack
A continuous heart pattern representing two loves flowing together as one to create something beautiful
In WSF material this piece will be easy to paint and customise to your liking
In WSF material this piece will be easy to paint and customise to your liking
by
curvecreative
Knotcase
A Celtic inspired iPhone case.
The KNOTCASE snaps onto your iPhone 4 or 4S and provides a slimline case that covers the back and sides of your phone. The Knot pattern on the back give an appealing texture to touch and gives your iPhone a unique look.
Click here to visit our site
Or click here to keep up to date on Facebook
by
David Bizer
A tribute to the arab spring -
The internet and mobile communication were crucial factors
to the democratic movement.
Like no other device the iphone is a symbol for portable internet.
I used traditional arabic patterns not only as a geographical reference,
they also connect to the idea of freedom as
in islamic art these patterns symbolise infinity.
The word"freedom" is embossed in arabic type and covers the apple logo.
- The black version comes with "freedom" embossed, I just printed the "bza" version for myself.
Buy a black or coloured one. White gets dirty quickly.
