This two-finger ring is unlike any other piece of jewelry you've ever seen. When you're wearing it, it appears as if there are three graduated moons nestled between your four fingers. In fact, the ring only goes around your middle and ring fingers.
The piece is 3D printed in stainless steel and infused with bronze for strength. The bronze doesn't show- the metal is white in color and very strong. The ring is just flexible enough so that you can bend it to fit the curve of your fingers. The balls won't deform.
The ring shown is a double size 7 but can be made in any sizes using the co-creator!
For the less daring, Single and Double Moonball rings are also available.
A little bit of honeycomb infused into your finger... my neighbor keeps bees on our roof and I was inspired by their hives. This ring looks fantastic in gold but I haven't managed to get pics of it yet. Shown in steel, size 7.
I'll make any size you need. There will always be an open spot in the back so you can tighten it a bit if you need to. I don't recommend trying to stretch any shapeways steel rings because they can break.
Two moonballs will appear to float between your fingers. People will ask how they are attached, though the answer seems obvious when you turn your hand over. The balls on this ring are Medium and Large. The smaller ball is about 14mm in diameter.
Sweet and simple, a literal "twist" on an infinity band.
A little less obvious than all those forget-me-knot rings out there, and a little more interesting than a band, this ring looks like an infinite loop or a rubber band that has been twisted around itself and folded in half to create a double loop. Unlike a rubber band, the loop *never actually touches itself*. If an ant was walking along the loop, he could walk forever and never reach a wall, kind of like a Mobius strip.
A single large starburst to wear on your finger. A little bit modern, a little bit retro- this ring is very popular at my brick and mortar store. It looks great in every metal. Shown in steel in size 7 but you can use the co-creator to order any size 3-13 including half and quarter sizes. This ring is NOT adjustable, so make sure you order the right size!
I also have Double and Triple Starburst Rings that feature starbursts in different sizes. If you like this ring, check them out, too!
A double moonball ring with one small ball and one medium ball. The balls appear to float on your hand between your fingers. It is somewhat adjustable. The larger ball is 14mm in diameter, the smaller ball is about 9.5mm. Size 7 is shown.
The Triple Starburst Ring is a two-finger floating ring with starbursts of three different sizes that sit between your fingers. The design is mid-century space age retro inspired with a very modern feel. This collection is the most popular at my brick and mortar store, the ring looks great in any of the metal finishes available on shapeways.
Use the co-creator to choose the size of your middle and ring fingers. Remember that you will be able to tighten the ring slightly around your fingers but it will be difficult to stretch it without breaking, so when in doubt round up.
If you like this but prefer a regular one-finger ring, check out the Single and Double Starburst rings which are also available in my shop.
Create a personalized cuff to say whatever you want! Send a message to a loved one in the form of a bracelet, make a bracelet with your name, or tell everyone what you believe! Up to 27 characters including spaces. This is a woman''s standard size cuff and is approximately 1cm high.
This clever floating ring turns the spaces between your fingers into buttonholes giving the impression that you could unbutton your hand! The ring fits on your two middle fingers so that the three buttons lie between your four fingers. Each button has four holes allowing you to stitch them up with your favorite color... or change the thread color to match your outfit! Use a regular needle and sewing or button thread.
Use the co-creator to choose two sizes- one for each finger- so that the ring will fit your hand perfectly! I suggest rounding up if you're unsure because the ring can be tightened but not stretched.
You'll find that my two finger rings do not interfere with the use of your hand in any significant way. I can still type 85 wpm even with the ring on. However, if you like this one but prefer a regular one-finger ring, check out my Buttonhole Ring.
A slightly larger version of my message cuff. You can personalize these bracelets with anything you'd like-- people's names, important dates, a message to your loved one, a personal belief, a favorite saying, a line from a poem... the sky's the limit! Ok, well, actually, it's 30 characters including spaces. If your message is too long contact me and I'll make something up custom for you.
A single medium moonball to perch atop your finger. This moonball is the same size as the larger ball on the Double Moonball S/M Ring. You can stack this ring with the other two sizes in different colors to create an amazing set.
Resembling the moon or an asteroid, this large pierced sphere is sure to draw attention when perched atop your finger. The perforated hollow ball is approximately 17.5mm in diameter. Available in full and half sizes (US) through the cocreator.
Try stacking this ring with the Small and Medium Moonball ring in three different finishes. The set looks fantastic!
The smallest member of the moonball family, this ring features a single round cratered hollow moon. The ball is 0.4in (10mm) in diameter.
The ring is grown from stainless steel using modern 3D printing technology and then infused with bronze for strength. The bronze doesn't show- the metal is white in color. Shown here in a size 7, this ring can be made in ANY SIZE using the co-creator.
(In the images with multiple rings, this is the SMALLEST of the three. Medium and Large also for sale here.)
It looks like someone knitted steel around your finger, but no... it's a ring!
This ring developed when my Aunt Rhonda, former owner of a knitting and quilting shop and obsessive knitter, saw my Rubber Band Ring. She asked if I could make her a more complex version. I began to play with the idea and it became the Knit Ring! With a full height of 28mm this ring is rather tall so when you choose your size you might want to round up.
This ring makes a great gift for the knitters in your life.
Swirling layers twist and interlock to form this intricate and unique bracelet. Inspired by architectural details, this delicate design is constructed appears fragile but is actually quite flexible allowing the bracelet to fit various wrists.
Inspired by a vintage ring inherited from Aunt Betty, this ring features a hollow ball that is held onto your finger by a horseshoe that has a square profile. Shown in size 7. For sizes over 7, the ball will remain the same size and the sides of the horseshoe will bend in slightly.
The Hive Cuff designed for Nylon. It's flexible enough to put on any arm, and tapered to fit. Some of the colors in the photo are white that I dyed at home. You can choose from the current strong and flexible colors here.
you are invited to button up your hand... or put on this ring and look like you did. Add your own thread for a pop of your favorite color. Choose from among the shapeways metal finishes. Select two sizes to fit your hand perfectly.
A two finger ring with tiny perforated "seeds" that nest between your fingers. The steel finishes are far less flexible than the silver. The silver shown here has been oxidized using liver of sulfur and the surface re-polished. If you order silver from shapeways you will have to oxidize it yourself if you want it to look like this.
Awesome, intricate and totally twisted... each earring is composed of 7 twisted spheres in varying sizes each interlocking with the next. The parts dangle freely. Just add earring hooks and they're ready to go. Hang just over 2.5" from the ear.
Get yourself a little friend... a hand caterpillar! His name is Caster and he is very curious about whatever you're holding in your hand. Choose any metal finish and select the two sizes to fit your hand.
Each pyramid earring is composed of seven interlocking pyramids. All they need is a pair of earring hooks and they'll be ready to wear. Shown in colors from past seasons. Please choose from among this season's shapeways colors (photos coming soon).