by
Dotsan
No1 in the series of animal heads, a smaller version of the 570mm high Stag Head (which is not available on Shapeways)
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
by
joabaldwin
I created the skeleton of a skeletal Lepidoptera. The Death's Head Hawkmoth (Acherontia atropos), seen on The Silence of the Lambs , has a skull marking on its back. I made a full human-like bone structure for the moth, with the grinning skull protruding from its back.
The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.
Yes, moths don't have endoskeletons, that's the whole point...
The model is very thin, yet sturdy and flexible. Detail level is fantastic, and the natural texture of the 3d printing process gives it a bone-like appearance that works wonders.
Yes, moths don't have endoskeletons, that's the whole point...
by
stefdevos
This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.
by
kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
by
Dotsan
No2 in the series of 3D printed animal heads.
The Animal Head Collection.
No 1 is a Stag head.
There is also a 75mm version here and a 300mm version here
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
The Animal Head Collection.
No 1 is a Stag head.
There is also a 75mm version here and a 300mm version here
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
by
cunicode
one cup a day
Day 09: Low Resolution Cup
30 days, 30 coffee cups project
View the collection
Day 09: Low Resolution Cup
30 days, 30 coffee cups project
View the collection
3D Print in Ceramics vs. 3D Model
review & details
by
Dotsan
No 3 in the series of 3D printed animal heads.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 4 is a Tiger.
Tiger Head 2.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Rhino head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
The Animal Head Collection.
No 1 is a Stag Head.
There is also a 75mm version here and a 300mm version here
No 2 is a Zebra.
No 4 is a Tiger.
Tiger Head 2.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
The Rhino head works well for reducing printing cost, it is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
by
MichaelMueller
This is a full working tabacco pipe. The head is made with glazed ceramics, the mouthpiece is antique bronze glossy.
+ 
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
+
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
by
Eragatory
Cutlery refers to any hand implement used in preparing, serving, and especially eating food.
Aside of the functional aspect of tableware, silverware has always been and will perpetually be an ornamental figure. Conceived to pleasure the eye while fulfilling one of our most primary needs of food consumption and or squander. Cutlery is unique in its ability to sustain time and carries a remarkable family heritage. Sets of knifes, spoons, forks have been passed on from generation to generation all over the globe, traveling the whole world as a piece of personal history.
Key elements while designing this set was the notion of decay/processing, ornamental and aesthetic excess as in former rococo and barock times, moments of collapse/disequilibrium and a balance in between etiquette dining and painful torture tools. By subverting the logic of perfection and beauty, non-perfect images coming from controlled methodologies were generated. What used to be about mastering the result of a non-perfect process is now about the production of monstrosity and the grotesque throughout very accurate mechanisms, like 3d printing. Which creates an unlimited range of possibilities concerning material usage, design approaches/aesthetics and form production.
Aside of the functional aspect of tableware, silverware has always been and will perpetually be an ornamental figure. Conceived to pleasure the eye while fulfilling one of our most primary needs of food consumption and or squander. Cutlery is unique in its ability to sustain time and carries a remarkable family heritage. Sets of knifes, spoons, forks have been passed on from generation to generation all over the globe, traveling the whole world as a piece of personal history.
Key elements while designing this set was the notion of decay/processing, ornamental and aesthetic excess as in former rococo and barock times, moments of collapse/disequilibrium and a balance in between etiquette dining and painful torture tools. By subverting the logic of perfection and beauty, non-perfect images coming from controlled methodologies were generated. What used to be about mastering the result of a non-perfect process is now about the production of monstrosity and the grotesque throughout very accurate mechanisms, like 3d printing. Which creates an unlimited range of possibilities concerning material usage, design approaches/aesthetics and form production.
by
BeepBeep3D
An 20 sided dice with embossed numbers. In Stainless Steel the dice weighs around 120 grams. This combined with the shine and coldness of the steel make an real impression.
by
froland
Giraffe with partially open body through a Voronoi structure.
The body hosts two balls with a Voronoi structure, one inside the other.
Want to know more about Voronoi?
Voronoi on Wikipedia
See the shop for other Voronoi inspired models and jewlery.
The body hosts two balls with a Voronoi structure, one inside the other.
Want to know more about Voronoi?
Voronoi on Wikipedia
See the shop for other Voronoi inspired models and jewlery.
by
mendelheit
This bust represents the ancient King Polygon, system administrator of a country far far away. He was very appreciated by his fellas, because of his calm and kindness. Actually, his secret was a good amount of sleep.
But even as a nice king, he had to take care of many wars and conflicts. His biggest enemy was Lord Nurbs, who always wanted to make things complicated. The night before their last big combat, King Polygon fell asleep and never woke up.
Thus, this bust is dedicated to the brave King Polygon.
(and this is my entry for the Faces Contest!:)
But even as a nice king, he had to take care of many wars and conflicts. His biggest enemy was Lord Nurbs, who always wanted to make things complicated. The night before their last big combat, King Polygon fell asleep and never woke up.
Thus, this bust is dedicated to the brave King Polygon.
(and this is my entry for the Faces Contest!:)
by
danmst3k
This is a highly detailed tyrannosaurus rex skull that would look great on your desk at work or at home! Kids will love it too! The black and white image is a render from a 3d package.
by
mught
Tie clip inspired on the TV series "Game of Thrones" based on G. R. R. Martin's best seller "A Song of Ice and Fire".
If you are looking for something specific don't be hesitate to write me and I will create it specially for you!
If you are looking for something specific don't be hesitate to write me and I will create it specially for you!
by
stefdevos
My girlfriend wanted a crucifix for our new modern apartment. I didn't like the look of a traditional crucifix so I designed this modern one. I never thought a crucifix could fit our taste but this one certainly does!
For retailers: buy 10 with 50% bulk discount:
http://shpws.me/nApA
by
chosetec
"Me Gusta" face, immortalized in a coin. Because you like it.
Trade in your IRL money for this funny money, then redeem it for real internet lols.
I believe the original face was penned by Insert31990 on deviantart.com.
by
MichaelMueller
This is the mouthpiece for the Skull Tabacco Pipe.
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself!
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself!
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
by
SellusionStar
This is a sculpture of an human hipbone. For this size it's very cheap. I have to push the price down ;)
(In real, there is NO text on the socket like in the rendered picture!)
(In real, there is NO text on the socket like in the rendered picture!)
by
bitstoatoms
The Minotaur Ring designed by Bits to Atoms and 3D Printed in the material of your choice, on demand by Shapeways.
Inspired Minotaur by The Drones
http://www.youtube.com/watch?v=YX34Lxcj5J8&feature=player_embedded
Standard size is US 11/34 66mm circ 21.24 diam
Personalized to your exact specifications on demand.
Bits to Atoms is a range of unisex, bespoke 3D printed jewelry.
Range includes rings, pendants, broaches and earrings.
by
MichaelMueller
This whistle is damned loud!
It's so noisy, you might be able to wake up the decedents. Therefore, beware of using it near cemeterys on spooky nights!
It's so noisy, you might be able to wake up the decedents. Therefore, beware of using it near cemeterys on spooky nights!
by
schmnr
Be a honorary member of House Stark with the Game of Thrones Stark Ring.
Available in sizes 5-14
