by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
Dotsan
No1 in the series of animal heads, a smaller version of the 570mm high Stag Head (which is not available on Shapeways)
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
Tiger Head 2.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
by
VENERIDESIGN
Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com for shipping address.
Thank you.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com for shipping address.
Thank you.
by
Bathsheba
A sculpture. Contrary to popular belief, it is not an algorithmic object.
by
nervoussystem
A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.
It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.
Watch the video below to see the the form was created.
--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
If you purchase directly from Shapeways it will not come with a chain.
by
Bathsheba
There are six regular convex polytopes in 4D, which are analogous to
the five Platonic solids in 3D. This is the fifth, the
hyperdodecahedron, a remarkably beautiful object brought to my
attention by George Hart.
Here it's shown in a Schlegel diagram so you can see all 120 dodecahedral cells, though most are transformed by perspective: in this projection, the only regular dodecahedra are the biggest one on the outside and the tiniest one at the center.
A smaller model is here.
Here it's shown in a Schlegel diagram so you can see all 120 dodecahedral cells, though most are transformed by perspective: in this projection, the only regular dodecahedra are the biggest one on the outside and the tiniest one at the center.
A smaller model is here.
by
Bathsheba
There are six regular convex polytopes in 4D, which are analogous to the
five Platonic solids in 3D. This is the third, the hypercube or tesseract, in the classic projection into 3-space, showing its 8 cubic faces in a nice straightforward visualization.
A different projection is here.
A different projection is here.
by
Bathsheba
This Voronoi network has the symmetry of a snub dodecahedron...almost. It is my homage to the wonderful diatoms of the world.
by
MindEversion
A borromeanring-minimal surface in honeycomb style.
Now i have one in a half size too.
