The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!

The mechanism is printed assembled, and will work without further assembly right after birth from the printer.

A few tips to consider:

- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!

- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.

- The best way to push it is by its nameplate. Do not push down, but forward.

- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.

world's smallest Rubik's Cube - for sale
its full functionaly Rubik's cube in small size (12mm)
forum link - http://twistypuzzles.com/forum/viewtopic.php?f=15&t=17286
youtube review video - http://www.youtube.com/watch?v=yBny_NvuxdU
youtube solve video - http://www.youtube.com/watch?v=483kdp1ud_E

Tom's Mini 12mm 3x3x3 Cube - other build method
http://www.shapeways.com/model/247522/mini-12mm-3x3x3-cube.html

Master Pyraminx

This is my version of a Master Pyraminx (with 4 turning layers). Edge length is 80mm.

Additional parts required: 4x screws M3x8, stickers.

The puzzle is only the one on the right of the pictures ! You also need an M1 screw (see original topic on twistypuzzles.com)

grigorusha Elementalix - 15mm (Micro Pyraminx)
The smallest pyraminx puzzle in the World!
forum link - http://twistypuzzles.com/forum/viewtopic.php?f=15&p=233873
http://bbs.mf8.com.cn/viewthread.php?tid=64111&extra=page%3D1
video: http://www.youtube.com/watch?v=CBGw5Vc3hwc

------------------------------
also World's smallest Tetraminx
forum link - http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19910
video: http://www.youtube.com/watch?v=ss9B_bs1hb4

you can buy stickers-set there
http://www.rubikkocka.hu/pages/kockamatricaeng.htm

grigorusha Revelation Cube - 20mm (Micro 4x4x4 cube)
forum: http://www.twistypuzzles.com/forum/viewtopic.php?f=15&t=20939

A hollowed-out version of my Mini Dino Cube. It is very small at around 3cm to an edge, aka the same size as a keychain 3x3. This is compatible with the optional keychain edge piece. This puzzle requires 8 1/2" 4-40 machine screws.

If you would like a fully stickered, dyed, and assembled version, email me at aceospades1250@gmail.com. Price for a fully stickered and assembled puzzle is $40.

grigorusha HyperMini Tetrahedron - 18mm (Micro Pyraminx)
The smallest Halpern-Meier Pyramid puzzle in the World!
forum link - http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19938
video: http://www.youtube.com/watch?v=Osxsl7e_oqw

you can buy stickers-set there
http://www.rubikkocka.hu/pages/kockamatricaeng.htm

Due to the high number of parts, the model for this product exceeds the limit set by shapeways, and the ordering for this puzzle can only be done through the backdoor meathod. This involves using the co-creator function to notify me that an order has been made.

When you purchase the puzzle, you have the option of buying a do it yourself kit, or an assembled puzzle. The diy kit only includes the parts for the puzzle, it does not include stickers, or screws. If you purchase an assembled puzzle, the puzzle will be shipped to you assembled, stickered, broken in, lubed, and ready to play. Either option you choose, I reccomend getting a black puzzle, because over time, the white material will absorb very small amounts of dust/dirt and will become discolored.

To order An assembled/finished puzzle, please send me an email at gingervergo at gmail dot com. The DIY kits are shipped to you directly by Shapeways (you will make payment to Shapeways). The assembled puzzles are shipped to you by me (you will make payment to me).




PRICES
DIY White: $120
DIY Black: $ 146
Assembled (either color): $200
(these prices do not include any taxes/import fees that you may have to pay)

part (2 of 3) Print 8

You need only six M3 screws 10mm or longer. It is not difficult to assemble.
5x5x9 sticker set in Olivèr Nagy's Shop
Further information at Twisty Puzzles Forum
See the Video on YouTube

The puzzle is only the one on the left of the pictures ! You also need two M1 screws (see original topic on twistypuzzles.com)

(3 of 3) Print 1

Mike's Mixup is on the inside a Mixup Octahedron. On the outside however it is pure chaos. Each piece is one of a kind making Mike's Mixup solvable just by shape. When solved all 50 pieces perfectly align to form an icosahedron. Sounds easy, right? Vizion Puzzles is so confident that Mike's Mixup will break you before you learn to solve it that we will give you $10 store credit if you master it*. As an added challenge for buying the puzzle as a DIY kit, Mike's Mixup acts like a 3D assembly/jigsaw puzzle. 2 puzzles in 1! To learn more read the Twisty Puzzles Forum and/or watch the YouTube video.

The puzzle consists of 50 visible pieces as well as an internal mini 2x2x2 (sold separately).

Difficulty Level: 10

Need to buy a 24 mm 2x2x2? For only $3 buy one at the Twisty Puzzles Shop

*Email vizionpuzzles@yahoo.com for details.