Chuck Stover



Thorn Dice Set with Decader
ceramicwombat @BrodieF I'm glad you like them! Please contact with that picture and the order number so they can replace the d10 with the broken bit.
ceramicwombat @judsondommer Those are bits of polishing medium. Sometimes they get trapped in details and are not removed by production staff. A pin or xacto blade work great for removing these bits.
ceramicwombat @forgotten_reaper Yes, that sounds like a bug.
ceramicwombat @Khaleesi Hah! Thanks for sharing!
ceramicwombat @pjfreej It's a d10 numbered by 10s (10, 20, 30...). You roll it with a d10 to produce d100 results.
ceramicwombat @bhawk2021 They are supposed to be polished in a barrel tumbler but it looks like your set was taken out too soon. I'd try the casing tumbler first, as it will be easier than the Dremel method.
ceramicwombat @leucochroic I don't have a shop-specific FAQ. However, the print lines are the stair-step effect you can faintly see on some parts of the picture above. Polishing removes much of this but some usually remains.
ceramicwombat @appalachiansabrecat The gold steel is plating. It does rub off if you keep a whole set in one bag and let them rub together. The plating won't rub off from normal use.
ceramicwombat @speedsoccer The plain stainless steel version can be polished carefully with a dremel tool. Any of the coated stainless steels can't be polished without destroying the finish.
ceramicwombat @a3dlei How odd. That may be where they added the sprue for the bronze step of the process but did not remove it cleanly. Glad you like them!
ceramicwombat commented on Top Die12 by ceramicwombat
April 26, 2016
Top Die12
ceramicwombat @toby_kintay Thanks! I'm glad you enjoy them!
ceramicwombat commented on Moiré Die6 by ceramicwombat
April 26, 2016
Moiré Die6
ceramicwombat @sonantsea Probably the closest in size and pattern would be my Ring Dice Set at
ceramicwombat @sonantsea This is a 17mm d6, slightly larger than a standard d6. The Woven Die4 would fit proportionately with it. If I were to make other dice with this pattern, they would be quite huge.
ceramicwombat commented on Thorn Dice Set by ceramicwombat
April 24, 2016
Thorn Dice Set
ceramicwombat @punchthisin Yes, I saw that video when it came out! It was the high point of my month.
ceramicwombat @draco1 Shapeways renamed that material to Polished Bronze Steel. Same finish, different name.
ceramicwombat @jamespatrickjp The only difference between sides is the mass of the numbers. I have used these for five years now and have not noticed a bias in any of them.
ceramicwombat @Azulveer Thanks! Nope, I'm from the US. I enjoy wombats because I think they are great utility mammals.
ceramicwombat @galiliosharma Yes, each of the dice is available individually at
ceramicwombat @Anusteve The $84 is for the set in stainless steel, the default material.
ceramicwombat @SkyShadow The gold won't rub off from normal dice use, but if they grind against each other in a dice bag the gold can rub off over time. If you are on the fence, I'd go with the polished grey steel.
ceramicwombat commented on Dice Set by ceramicwombat
April 11, 2016
Dice Set
ceramicwombat @Vacans I think the dice in the picture you reference are plain stainless. They are not inked.
ceramicwombat @packersmoversdelhi The material in the default picture above is stainless steel with "inking" added after I received them.
ceramicwombat commented on Joyful Code Pendant by ceramicwombat
February 27, 2016
Joyful Code Pendant
ceramicwombat @3Diego SketchUp Pro and Blender
ceramicwombat commented on Thorn Die10 by ceramicwombat
February 16, 2016
Thorn Die10
ceramicwombat @HealixLevington Hello. They tried to print this one in the polished cast metals and it failed too many times. I don't know how the decader can be produced but this one can't, but Shapeways says it's not possible.
ceramicwombat commented on Large Dice Set with Decader by ceramicwombat
December 26, 2015
Large Dice Set with Decader
ceramicwombat @zulujim Please E-mail your order number to me at I'll make sure they double-check they are sending you plain stainless and not bronze.
ceramicwombat @zulujim Did Shapeways send you a bronze set? If so, please send your order number and a picture of the incorrect dice to to have this error corrected.
ceramicwombat commented on Top Die4 by ceramicwombat
December 22, 2015
Top Die4
ceramicwombat @jana_83 The stony bits are polishing medium and can be picked out with a pin or xacto blade. However, it looks like this model was not left in the polishing tumbler by the metal printing techs for long enough. Please contact with your order number and the picture below with this issue.
ceramicwombat commented on DoubleSize Thorn Die20 by ceramicwombat
December 17, 2015
ceramicwombat commented on Labyrinthine Die6 by ceramicwombat
November 23, 2015
Labyrinthine Die6
ceramicwombat @Fonstw Yep, If you start at the 1 side, the correct path passes through each of the numbers in order until it reaches the 6.
ceramicwombat commented on Top Die10 by ceramicwombat
September 18, 2015
Top Die10
ceramicwombat @hartford Thanks for sharing the pic!
ceramicwombat commented on Elder Futhark Die24 by ceramicwombat
August 20, 2015
Elder Futhark Die24
ceramicwombat @elizaphn Glad you like them!
ceramicwombat commented on Caltrop Die4 by ceramicwombat
August 11, 2015
ceramicwombat commented on Sputnik Die4 by ceramicwombat
August 11, 2015
Sputnik Die4
ceramicwombat @Fonstw These wouldn't hurt to step n as much as my Caltrop Die4 or Thorn Die4.
Sputnik Dice Set With Decader
ceramicwombat @guandar Shapeways doesn't ink the models but the process is very easy. You paint the dice in acrylic paint, wait for it to dry, and then polish the dice with a rough cloth. The process takes about a half hour for a complete set. I did mine in blue but a friend did his in translucent red acrylic and they look quite sharp.
ceramicwombat commented on Thorn Die20 by ceramicwombat
July 29, 2015
Thorn Die20
ceramicwombat @Iggi Glad you like them! Thanks for sharing the photo.
ceramicwombat commented on Botanical Dice Set by ceramicwombat
July 3, 2015
Botanical Dice Set
ceramicwombat @Bruntic Thanks! These are a tiny bit bigger than my Large Dice Set. A size comparison of all my sets is at
ceramicwombat @whereswalden90 I ink them by painting them with a thin acrylic paint, allowing them to dry, and then rubbing them with a rough cloth. The only difference in the mass on each side is in the numbering. Other than this, each side of a die has the same shape and mass.
ceramicwombat commented on Thorn Die20 Ornament by ceramicwombat
June 9, 2015
Thorn Die20 Ornament
ceramicwombat @s_k_dowse Nope, this is a fully-functional die (just large enough to be used as an ornament).
ceramicwombat commented on Rolling Bell Die20 by ceramicwombat
May 18, 2015
Rolling Bell Die20
ceramicwombat @LordVictorHalgaard Nope, no chance of a metal version at this time. The Shapeways metal printing methods don't allow for moving parts.
Pinwheel Dice Set with Decader
ceramicwombat @stephmcrawford The production time varies by material. Click on the material in which you are interested at to see how long it will take your order to reach you.
ceramicwombat commented on Dice Set with Decader by ceramicwombat
January 31, 2015
Dice Set with Decader
ceramicwombat @frabjess This set includes two d10s: a regular d10 and a decader d10.
ceramicwombat @frabjess This set does include a d8. If you didn't receive a d8 in the set, please contact and let them know your set was missing a die.
ceramicwombat commented on Large Dice Set by ceramicwombat
January 11, 2015
Large Dice Set
ceramicwombat @Bruntic Those turned out right sexy. Thanks for sharing pics!


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.